Mushkin VS Corshair

[Vatos_locos]

1080 Mhz with 1.93 nice speeds i think :p and less voltage than stock with higher speeds from stock :P
those mems are rated 1066Mhz 2.1V 5-5-5-15
all the voltages are measured with Digital multimeter

[Vatos_locos]

a bit higher 1100Mhz

[18 is # 1]

vatos-
Try these (mine were at 1.9v) at 1:1.25

All the "other timings" are set to 3 in the bios. The pro will add to them automatically.
I'm not sure an Abit pro will go above 1150 MHz on RAM.

[Vatos_locos]

with the old mem i could play max 1200 4-4-4-4 but
i'am stuck with PL7 i will try it
but first explain me what timmings you want
5-5-5-12 and tell me all the subtimings names and values to set them becouse memset does not work for me

[18 is # 1]

with the old mem i could play max 1200 4-4-4-4 but
i'am stuck with PL7 i will try it
but first explain me what timmings you want
5-5-5-12 and tell me all the subtimings names and values to set them becouse memset does not work for me

Memset doesn't work with an Abit Pro because the MCHBAR is locked. There is a modified bios to work around it, but I've never used it. PL is determined by the spec of the RAM, speed you are running it, and the divider you use. That's why my Team 667 runs PL5 and my Mushkin 800 ran PL6..
The subtimings in your bios are
tRFC-55
tWR-3
tWTR-3
tRTP-3
CR-Auto

Here is a link to the moded bios options:http://www.lejabeach.com/ABIT/IP35Pro/

[Vatos_locos]

i have the moded Bios but memset it does not work at all
my old teams ran @ PL5 :S
i'll give a shot with the timings you want

[Vatos_locos]

18 is # 1 all yours
also 1.89V
seems crap to me compare to yours

[18 is # 1]

18 is # 1 all yours
also 1.89V
seems crap to me compare to yours

Nope, the RAM is fine. The Everest numbers are because my clock is at 3.85 GHz (E8400). You're running 3.4 GHz (very respectable for a quad). Can you go up to the next divider (1:1.5)? I don't think so, but give it a try.

[Vatos_locos]

at 535Mhz again ? i think i can i will try

here it is @ 537 Mhz with 1:1.5 ( 2:3 Divider ) 1.89V
i noticed that you have your mems with CR 1 my run with 1:25 was with CR2 but not a big difference

[18 is # 1]

at 535Mhz again ? i think i can i will try

here it is @ 537 Mhz with 1:1.5 ( 2:3 Divider ) 1.89V
i noticed that you have your mems with CR 1 my run with 1:25 was with CR2 but not a big difference

Everest shows CR2 (and so will CPU-Z), that setting in bios evidently doesn't really change anything unless you have an Nvidia based mobo.
You've got the divider, now start seeing how far up you can raise your FSB.
You dropped from 428 to 358, now start going back up slowly.

[Vatos_locos]

indeed everest shows Cr2 the mems can go up to 1111Mhz stable i tested them yesterday with the 1:2.0 divider @ 1112 i get a random errors in memtest loop 5

those are going to be my 24/7 i wend down my cpu from 3.8 tho but this is just until my quad leaves this board it for sale now i'am going for one E8600

[18 is # 1]

Your FSB will make a bigger difference in performance than your RAM. It's still nice to know how high that RAM can OC.

[Vatos_locos]

yhea i know but it's for physiological reasons lol
and it wont make a big difference in real life from 3680 to 3840 where the chip maxes
and lower voltages less heat and blah blah
but i'm impressed with this kit 1100 is more than fine with 2x2Gb and 9xxxMb/s Read
i'am really going to miss my good GKX's hiting 600mhz 5-5-5-15 24/7 but Vista needs RAM
so i think one E8600 will be better in this set up and i will able to have more cpu circles eg. 550x8 and the mem's 1100 1:1
will see