Originally Posted by Jaivan
I'd try those points.
Seems to be this chip, same as on the el cheapo Asrock 790GX/128M.
I'd try those points.
Seems to be this chip, same as on the el cheapo Asrock 790GX/128M.
New sweet ride
Just bought M3A79-T and Phenom 9950BE(JAAAB AA 0836CPAW)
And within a few hours I set whole bunch of new personal best records
@3547 MHZ(16.5x215 11xNB 11xHTT PCI-E@125MHz)
CF 4870's @ 750/900
3DMark06 18577
SuperPI@21.844
@3535 MHz(17.5x202 12xNB 12xHTT PCI-E@118MHz)
CF 4870@ 790/1080
Lost Planet Performance test,1680x1050 8xAA, 16xAF and high setting on everthing else
snow=61 fps, caves= 78 fps
Half-Life2 video stress test(1680x1080)= 198 fps
LightsMark(1280x1024)= 298 fps
CineBench
1 CPU=3154
4 CPU=11229
OPENGL=6887
Just have to figure out how to get 3.6GHz stable
I know I need more volts to the caches
but I'm not sure what to adjust
Last edited by AMDDeathstar; 10-02-2008 at 02:04 PM.
CPWAW?Voltages?
If I'm not mistaken this is the new 125W version of 9950.
WR SuperPI. this silicon must be awesome.New sweet ride
Just bought M3A79-T and Phenom 9950BE(JAAAB AA 0836CPWAW)
And within a few hours I set whole bunch of new personal best records
@3547 MHZ(16.5x215 11xNB 11xHTT PCI-E@125MHz)
CF 4870's @ 750/900
3DMark06 18577
SuperPI@21.844
@3535 MHz(17.5x202 12xNB 12xHTT PCI-E@118MHz)
CF 4870@ 790/1080
Lost Planet Performance test,1680x1050 8xAA, 16xAF and high setting on everthing else
snow=61 fps, caves= 78 fps
Half-Life2 video stress test(1680x1080)= 198 fps
LightsMark(1280x1024)= 298 fps
CineBench
1 CPU=3154
4 CPU=11229
OPENGL=6887
Just have to figure out how to get 3.6GHz stable
I know I need more volts to the caches
but I'm not sure what to adjust
get Nb speed up too.
this really blows that my phenom is so slow lol
HAVE NO FEAR!
"AMD fallen angel"
You didn't get the memo? 1 hour 'Fugger time' is equal to 12 hours of regular time.
GratzNew sweet ride
Just bought M3A79-T and Phenom 9950BE(JAAAB AA 0836CPWAW)
And within a few hours I set whole bunch of new personal best records
@3547 MHZ(16.5x215 11xNB 11xHTT PCI-E@125MHz)
CF 4870's @ 750/900
3DMark06 18577
SuperPI@21.844
@3535 MHz(17.5x202 12xNB 12xHTT PCI-E@118MHz)
CF 4870@ 790/1080
Lost Planet Performance test,1680x1050 8xAA, 16xAF and high setting on everthing else
snow=61 fps, caves= 78 fps
Half-Life2 video stress test(1680x1080)= 198 fps
LightsMark(1280x1024)= 298 fps
CineBench
1 CPU=3154
4 CPU=11229
OPENGL=6887
Just have to figure out how to get 3.6GHz stable
I know I need more volts to the caches
but I'm not sure what to adjust, what cooling do you use? , any screens? , what vcore?
Should be CPAW ,fixed now.CPWAW?
If I'm not mistaken this is the new 125W version of 9950.
First few tries were on water only(temps got up 53 C at 3.4GHz range)Gratz
the only thing I had change the bios were ddr voltage,ram speed and disable gang support
I got it to run at 3.4GHz by just upping the multi to 17x and bumping the vcore 1.35
I did a run of 3DMark06 17978, 22 points behind Ben_Brown top score.
Then it was TNPNTP(Take No Prisoners, Nuke The Place)
Water/Ice cooling(kept my CPU temp at 32 C)
Set vcore 1.550v
upped HTT voltage 1.4v
upped ddr voltage
then I just kept adjusting ref. clock and multi's
I wasn't concerned about finding the lowest vcore voltage to run at those speeds, that's for a later date.
Last edited by AMDDeathstar; 10-02-2008 at 04:01 PM.
I tried those points with voltage at 1.3v BIOS and I got ~1v with the voltage at 1.375V BIOS I got ~.56v.
I'd try those points.
Seems to be this chip, same as on the el cheapo Asrock 790GX/128M.
I tried poking around other points around there but non of them seem to give the right voltage
Also a little update on my chipset water cooling attempts right now its a complete failure.
Well the chipset blocks were fine but seems like my BP 1/2" fittings don't like to work with the EK Multioption Res and the EK 4870 WB.
It didn't pass the leak test and I don't have very much time right now to figure it all out so I'm sadly on air right now.
Posting Permissions
Reply With Quote
Bookmarks