MMM
Page 1 of 8 1234 ... LastLast
Results 1 to 25 of 192

Thread: How to upset the XS Liquid Cooling section.

  1. #1
    Xtreme Enthusiast
    Join Date
    May 2006
    Posts
    607

    Arrow How to upset the XS Liquid Cooling section.

    Look an all in one ready to go 240 watercooling system.

    http://www.northq.com/products/coolers/nq3590_i.html








  2. #2
    Xtreme Enthusiast
    Join Date
    Jul 2006
    Posts
    620
    I lol'ed
    A real water cooling system
    http://www.petrastechshop.com/swh2cocpulic1.html
    “You Americans are so gullible. No, you won’t accept communism outright, but we’ll keep feeding you small doses of socialism until you’ll finally wake up and find you already have communism. We won’t have to fight you. We’ll so weaken your economy until you’ll fall like overripe fruit into our hands." Nikita Khrushchev

  3. #3
    Xtreme Enthusiast
    Join Date
    May 2006
    Posts
    607
    But you have to put that together and fill it up so you fail

  4. #4
    Moderator
    Join Date
    Nov 2006
    Posts
    1,217
    Not for our use, but for OEMs and those that dont want to get there feet *or computers wet this is pretty nice solution made by asetek.

    And as long as you swaped out those bling fans you might some better numbers.

    Again like I said not for Xtreme people, but for users that have a 1.8ghz c2d that want to get to 2.4 sliently and wanna swap the fans out this could be pretty cool.

  5. #5
    Xtreme Member
    Join Date
    Jun 2008
    Location
    holland
    Posts
    340
    have no cleu obout the performance but where is the ress hmm

  6. #6
    Banned
    Join Date
    Jun 2006
    Location
    in a Red Rage D....
    Posts
    3,839
    hmm, if the pump doesn't die too early, it could/would probably perform better with an MCR220 rad...

  7. #7
    Xtreme Enthusiast
    Join Date
    May 2006
    Posts
    607
    Quote Originally Posted by septim View Post
    hmm, if the pump doesn't die too early, it could/would probably perform better with an MCR220 rad...
    Thats sort of defeats having a sealed ready filled system thats guaranteed to run for over 5 years maintenance free.



    .

  8. #8
    Xtreme Enthusiast
    Join Date
    Dec 2006
    Location
    Dallas, TX
    Posts
    565
    Looks like the Asetek LCLC. http://www.asetek.com/content/view/50/104/

    I have the single 120 setup and its performance is less than bad.

    ---------------------------------------------------------------------------------------------------------------
    MV-G
    3770K 5.00
    7970 1200/1700
    GSkill 2400
    Seasonic Platinum 1000
    Silverstone TJ08-E
    - Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
    ---------------------------------------------------------------------------------------------------------------



    USA National Debt



  9. #9
    Xtreme Addict
    Join Date
    Mar 2007
    Posts
    1,489
    Looks like a movie prop from the matrix.
    Asus G73- i7-740QM, Mobility 5870, 6Gb DDR3-1333, OCZ Vertex II 90Gb

  10. #10
    Xtreme Addict
    Join Date
    Apr 2008
    Location
    Ottawa, Canada
    Posts
    2,443
    HAHAHAHA, wow! I will say it is compact though but seriously I would rather build my own knowing the parts and performance as opposed to a compact little system that is not reviewed and tested in here. The parts all look cheap but I am guessing that is exactly what it is supposed to be. Compact, cheap and maintenance free for 5 years. I guess it would be good for someone without any knowledge of Water Cooling and does not want to learn either and is too lazy to make their own and maintain it.

  11. #11
    Xtreme Enthusiast
    Join Date
    Jul 2008
    Location
    Winterthur, Switzerland
    Posts
    584
    If that one is too extreme, I think there's also a single-120 version of it available.

    And if that's still too much, check out the Auras Conditioner...

  12. #12
    I am Xtreme
    Join Date
    Jun 2007
    Location
    Imperial Palace, UDE of Pitatopia
    Posts
    8,396
    This is how you upset the LC section here.
    Circles SucQ!

    If your annoyed by sigs telling you to put things in your sig, then put this in your sig

    Bribery won't work on me...just say NO to AT!!!

  13. #13
    Xtreme Mentor
    Join Date
    Jun 2007
    Location
    Chicago
    Posts
    3,284
    Quote Originally Posted by iandh View Post
    Looks like a movie prop from the matrix.

    Yeah they looked like the plugs that came out of neo's head when he stopped using "thermaltake" and came out of the matrix.
    Asus P6T, I7-920, 6gb ocz xmp, 4890, Raid 0-1 Terabyte, full watercooled - Triple Loop 5 radiators

  14. #14
    Registered User
    Join Date
    Aug 2006
    Posts
    5,855
    Here you go.

    http://www.techwarelabs.com/reviews/...mini_aquagate/

    Coolermaster Aquagate Mini ... complete with single aluminum 80 mm radiator. Performs worse than stock Intel heatsink cooling lol

  15. #15
    Xtreme Member
    Join Date
    Oct 2007
    Posts
    379
    Even my Sempron would put this kit to shame when I do a Prime load testing.

  16. #16
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Complete with pushpins for maximum aggravation for the xtreme crowd!

  17. #17
    Xtreme Member
    Join Date
    Mar 2008
    Location
    Ogdensburg, NJ
    Posts
    299
    Quote Originally Posted by Waterlogged View Post
    This is how you upset the LC section here.
    AH! THERMALTAKE!!! KILL IT!!!
    3DMark06 Score: 13733
    Pentium Q6600 @ 3.2Ghz
    XFX 680i LT SLI
    4gb Mushkin DDR2-800
    EVGA 8800GT 512mb SSC
    500GB WD HD
    ABS Tagan BZ800

  18. #18
    Xtreme Addict
    Join Date
    Aug 2006
    Location
    The Netherlands, Friesland
    Posts
    2,244
    I bet pissing on a CPU would keep it cooler!
    >i5-3570K
    >Asrock Z77E-ITX Wifi
    >Asus GTX 670 Mini
    >Cooltek Coolcube Black
    >CM Silent Pro M700
    >Crucial M4 128Gb Msata
    >Cooler Master Seidon 120M
    Hell yes its a mini-ITX gaming rig!

  19. #19
    Chasing After Diety
    Join Date
    Jan 2007
    Location
    Absolutely Speachless :O
    Posts
    11,930
    Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous? *
    Miyuki: W3580 6GB DDR3 P6T-Dlx
    Lind: Dual Gainestown 3.07
    Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*

    [12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
    [12:38] Naekuh: i love watching u get the firing squad on XS
    Its my fault.. and no im not sorry about it either.

  20. #20
    Xtreme Mentor
    Join Date
    Nov 2006
    Location
    Florida
    Posts
    2,598
    Quote Originally Posted by Solidsnake666 View Post
    AH! THERMALTAKE!!! KILL IT!!!
    I agree with you, Thermaltake=

    Naukuh, I also at your post haha!

  21. #21
    Xtreme Addict
    Join Date
    Mar 2008
    Location
    川崎市
    Posts
    2,076
    Quote Originally Posted by Waterlogged View Post
    This is how you upset the LC section here.
    to make the fun complete, here some quotes from the "reviews":
    This is a great product.
    he only con that i have about it is that it took me about 3 hours to install it , just becuase the radiator is soo big i have a mid-tower and somehow i managed to put it all inside of the case.
    note, its a 120x1 rad...

    Only once in a while u can hear the pump sucking the coolent and thats about it
    Wait, so the pump works only part time?

    It looks really awesome after u instiall it. If your case has a clear side-panal with some LEDs it looks really awesome.
    This thing is the best, if you have trouble cooling your system u'll love this, It dropped my temp about 20 deg C at full load
    from what? p1 stock cooler?

  22. #22
    Chasing After Diety
    Join Date
    Jan 2007
    Location
    Absolutely Speachless :O
    Posts
    11,930
    how to upset this section?

    Putting 2 high end quadcores (Q9650 class) in a hat unused. And let it sit there.



    Oh wait, thats phonecall from dave


    :hiding:
    Last edited by NaeKuh; 09-30-2008 at 01:24 PM.
    Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous? *
    Miyuki: W3580 6GB DDR3 P6T-Dlx
    Lind: Dual Gainestown 3.07
    Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*

    [12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
    [12:38] Naekuh: i love watching u get the firing squad on XS
    Its my fault.. and no im not sorry about it either.

  23. #23
    Xtreme Enthusiast
    Join Date
    Apr 2008
    Location
    Anti-SoapBoxVille
    Posts
    744
    I wish i had extra chips laying around.....

  24. #24
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    159
    I thought you had to mention aluminum to get the Liquid section riled up?

  25. #25
    Banned
    Join Date
    Mar 2007
    Location
    French Quarter of Grinchville
    Posts
    2,853
    Quote Originally Posted by gxavier View Post
    I thought you had to mention aluminum to get the Liquid section riled up?
    Bingo !! More especially asking if it is a good idea to buy a aluminium part and mix with the copper/brass loop

Page 1 of 8 1234 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •