**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[zsamz_]

Just did 8x460MHz @ 1.43V 6,7hrs prime stable and it crashed during the night. Still not stable enough for me, need some more fine tuning i guess although in games, work and stuff is rock stable.
Seems like a good cpu, does 3.2GHz on def. voltage, perhaps i can try to reach 500MHz for a few hours priming just to see if it can handle it.
Guys, what's top NB and GTL voltage recommended for 24/7 usage with active cooling? (92mm fan over NB)

i'm using 1.42v 24/7 on nb with thermalright hr-05 ifx no fan hottest i saw it was 38c

[zsamz_]

i finally broke 12k

[Dimek]

zsamz_ - thats really great, congrats & respect !!

[fireice2]

woot!!! great to see this board has still much to offer!

[mad_skills]

Has anyone done 500MHz on Q6600 on this mobo by any chance?

[Sepander]

Has anyone done 500MHz on Q6600 on this mobo by any chance?

Here:

[mad_skills]

My mistake, what i meant was prime stable 500MHz for few hours, and some NB, VTT and GTL settings if possible.

[nfm]

My mistake, what i meant was prime stable 500MHz for few hours, and some NB, VTT and GTL settings if possible.

500FSB Prime is in early pages of this thread, I have done 484FSB Prime stable with Q6600 (NB 1.61, VTT 1.60, GTL Disabled), I don't have screens since my RAID0 failure but I think it somewhere here on XS . The board is capable of 500FSB, but you need a cherrypick CPU.

[kitfit1]

My mistake, what i meant was prime stable 500MHz for few hours, and some NB, VTT and GTL settings if possible.

Prime stable at 500+fsb with a quad is a very tall order on any mobo. I hav'nt seen anyone post an 8hrs Orthos/Prime run as proof they have done it. Plenty of suicide shots, but no Prime proof. Running a dual core at 500+fsb is easy, i have run an E6600, two E8500's and my current E8600 all at 500fsb or over. In fact i've never run any of them under 500fsb.

[mad_skills]

Prime stable at 500+fsb with a quad is a very tall order on any mobo. I hav'nt seen anyone post an 8hrs Orthos/Prime run as proof they have done it. Plenty of suicide shots, but no Prime proof. Running a dual core at 500+fsb is easy, i have run an E6600, two E8500's and my current E8600 all at 500fsb or over. In fact i've never run any of them under 500fsb.

I know C2D is easy, have done it on my previous E6750 just want to try it on Q6600 as well.

500FSB Prime is in early pages of this thread, I have done 484FSB Prime stable with Q6600 (NB 1.61, VTT 1.60, GTL Disabled), I don't have screens since my RAID0 failure but I think it somewhere here on XS . The board is capable of 500FSB, but you need a cherrypick CPU.

I know the board is capable, and the cpu is a really good one, i just wandered what possible settings i might need be using and since it's 52F (11C) here i thought i might try it.

[emoners]

i miss my DFI P35 board... this P45 JR is quite confusing for me

[mad_skills]

If going P45 why didn't you get Dark LanParty man?

[emoners]

If going P45 why didn't you get Dark LanParty man?

coz was just planning to use this for a HTPC setup for my brother...but since it's DFI, i wanna so TWEAK it

[NapalmV5]

great mobo.. this thing runs dead cold even @ full load

the only limit: vtt i need way more than 1.45/more than just 1.6

do the JP10/J16 jumpers have anything to do with vtt? is there a vtt mod posted?

thanks

[Alex-Ro]

Why would you need so much vtt?

[NapalmV5]

lol why? cause if id have up to 2vtt or more available @ bios id be able to run my q9650 stable @ 5+ghz

http://valid.x86-secret.com/show_oc.php?id=423042

[Shiranui Gen-An]

I bought an LT P35 T2R cheap and received it today, and promptly installed my E6300+Tuniq 120 for testing. So far, at 400FSB with the 2:3 divider on 266 strap, I can only seem to get my Ballistix 8500 kit stable. None of my other D9Gxx kits can pass MemTest. I'm wondering if I'm doing something wrong, or what...

[zsamz_]

I bought an LT P35 T2R cheap and received it today, and promptly installed my E6300+Tuniq 120 for testing. So far, at 400FSB with the 2:3 divider on 266 strap, I can only seem to get my Ballistix 8500 kit stable. None of my other D9Gxx kits can pass MemTest. I'm wondering if I'm doing something wrong, or what...

dfi+d9gkx=
try 3-3-3-8 800-840 mhz 2.24v

[emoners]

dfi+d9gkx=

hehehe funny gif... but not ALL the time true...

old pic...

CPU-Z



& yup, under the hood it says D9GKX

[nfm]

great mobo.. this thing runs dead cold even @ full load

the only limit: vtt i need way more than 1.45/more than just 1.6

do the JP10/J16 jumpers have anything to do with vtt? is there a vtt mod posted?

thanks

I never figured what these jumpers are for. I attempted to increase VTT over 1.6v in the past but ended up modding the vNB (controller between IDE and SATA ports). You could try asking onepagebook over the ocxtreme, he has direct contact with engineer of this board.

[zsamz_]

i can't do over 1150 with any of my 4 sets of d9gkx

but my 2x2 gskills pc2-9600 broke 12k
i can go higher but i dont wanna break 2.1v

[nfm]

No way man, I got PC2-8800 and they crapped out at 525Mhz, didn't even reach rated 550Mhz.

[zsamz_]

No way man, I got PC2-8800 and they crapped out at 525Mhz, didn't even reach rated 550Mhz.

damn send it back
even my redline cn do 550+ withought breakin a sweat

[mrcape]

tHat's hot $hit. Make cold and try 10x

[zsamz_]

tHat's hot $hit. Make cold and try 10x

i gonna have to wait till it gets cold to do 10x
i need lots of juice to go past 5.0