IMO furmark is very hard on the card, and especially volt modded cards. I use ATI tool to get a general idea, and then just use actual gameplay to decide if I need to go down a bit.
IMO furmark is very hard on the card, and especially volt modded cards. I use ATI tool to get a general idea, and then just use actual gameplay to decide if I need to go down a bit.
ES Q9550 E0 @ 4.0GHz (471x8.5) 1.256v
TR-Ultra-120-X, 115CFM 120mm fan
Maximus II Formula @ 1884MHz FSB
Ballistix DDR2-800 (4x1GB) 1132MHz 5-5-5-5-15 4-55-8-14-11-3-8-5-4-2T
eVGA GTX 280 @ 702c/1404s/1260m (1.175v)
Auzentech XPlosion DTS-Interactive Vantage 'X'-6,727
300GB Velociraptor, PC P&C 750W
(3)120mm, (2)90mm, (1)250mm case fans in TT Armor
27.5" LCD/Z-5500-office, 95" 720P projector/7.1ch-living room
Logitech Driving Force Pro-Microsim Racing Pod
I have 9600GSO card, but chip is the same as 8800GTS. Volt-modded to 1,3V (original 1,21V). Cooling is TT DuoOrb. When using rthdribl 60C is max, but when I start FurMark temperature is rising to 73C. On higher voltages I saw 90C one timeGames running well except Colin McRae DiRT, which freezes with voltages higher than 1,3V on any clocks. I'm thinking about add on/off switch, because this mod is useable only for benchmarks
http://www.bartxstore.com/- Standard and Extreme Cooling Components
Posting Permissions
Reply With Quote
Bookmarks