32m SPi Low Clock Challenge

[Zeus]

Had a blast this afternoon, i wanted to try PL 8 at 600fsb with 1.73Vnb (bios) but windows didn't load, i really need to upgrade NB cooling and give it some more volts.

Then i went on to give 1T a go, i read somewhere 1T hardly made any difference.

I can't remember who posted it was but i know he's wrong!

Got 3 of my targets:

Sub 12 minutes at under 3.6GHz (imagine this at PL=8!



Sub 11 minutes at under 4GHz (sorry ToyTen):



And last but not least, sub 10 minutes at under 4.5GHz



As you can see, for sub 12 and sub 10, a lower frequency could even be possible.

[ToyTen]

@ Zeus: I'm not sure i would loose so much compare to your cpu frequency by lowering mine at yours, if my english was correct. And the 10.56.296 is there to prouve it, untill I try it of course
No need to apologize bro keep pushing harder, that's the way to pull people doing better each time

GG by the way

[NormanABates]

My first time to join this club:

Time Zone: 14.xx
Proc Speed: 2920.03 MHz
Actual Time: 14.56.359s
Multiplier: 6 x 486
Ram Type: DDR2
Ram Speed: 486 mhz
Ram Timings: 4-4-4-4
Divider: 1:1
Processor: Intel Core 2 Duo E8200
Chipset Used: P965
CPUZ Validation : http://valid.x86-secret.com/show_oc.php?id=422290
Full Screen :

[TheKarmakazi]

@ Zeus what setting were you using on the SpiTweaker?

[Zeus]

Used this:

Size in MB: 384

CDT box unchecked (regular waza)

Size file in KB: 1024

[George_o/c]

1896MB CW + CDT works well too

[monteboy]

sub12

[3oh6]

sub12

haha, you snipped me by a hair...now, who is the first that will go 592 sub 12?

click for full size...


can't remember details but i will try with Monteboy's tweaker...might have to
tighten up that ram if it is possible to go any lower.
will try to get an update done this week boys.

[monteboy]

Let the race begin!

[3oh6]

Let the race begin!

curious, what voltage are you running 600FSB tRD8 5:8 at and what is your cooling?
trying to get an idea of what everyone is needing to do the same. TIA

[monteboy]

curious, what voltage are you running 600FSB tRD8 5:8 at and what is your cooling?
trying to get an idea of what everyone is needing to do the same. TIA

1,76V on NB
water cooling (default asus fusion block)
vddr 2,146V

[Zeus]

1.76V in bios or 1.76v read out from Asus probe?

1.76V in bios gives ~1.72V in windows for me.

Great scores b.t.w.

[monteboy]

1.76V in bios or 1.76v read out from Asus probe?

1.76V in bios gives ~1.72V in windows for me.

Great scores b.t.w.

1,76V in Bios

[3oh6]

1,76V on NB
water cooling (default asus fusion block)
vddr 2,146V

excellent, thanks

[monteboy]

Here we go again.
12.xx

[3oh6]

all up to date

[NormanABates]

thanks 3oh6.

[ToyTen]

I have chosen:

Size in MB: 3472, CDT box unchecked too and Size file in KB: 1024
for my sub11 time zone. maxmem 600 and default cache memory(2046)

[Delex]

Hi,
I'm trying to get a decent score on SPI 32M...but I have a lot of problems :P

Setup:
-E8600 (534x7.5 MHz=4 GHz)
-ASUS P5E64 WS Evolution
-Corsair Dominator 1800C7 ~1700 6-6-6-18
-HD Maxtor 160 Gb
-Gigabyte 7600Gt

I just installed a clean XP+Sp2 and ran the first SPI32M no tweaked.
-11'38.6xx

After MAXMEM=600 and 512-1024 + many combinations with OCX SPI Tweaker I have about 556xxxx mem and 566xxx cache...but the score is EVERYTIME about 11'32.6 and 11'32.6

Can it be a problem of the HD drive? (very slow????) I'm testing by about 1 week :S

Thx

[Zeus]

HDD is not very likely to cause bad scores.

Disable execute disable bit and set plug and play OS to : no, disable everything you don't need in bios.

Also, set LargeSystemCache to 1 in register.

Try to run the highest FSB possible and even more on memory speed.

High FSB with high memoryspeed is the key really.

[Delex]

Hi Zeus,
thank you very much!

I already disabled all devices which I don't like the HD Audio, IEe1934 etc...
LSC is already to 1 (changed from the control panel)

The board has many problems with other dividers :S

Alex

[NormanABates]

13.xxx time zone:


Time Zone: 13.xx
Proc Speed: 3128.18 MHz
Actual Time: 13.59.563s
Multiplier: 6 x 521.3
Ram Type: DDR2
Ram Speed: 521 mhz
Ram Timings: 4-4-4-4
Divider: 1:1
Processor: Intel Core 2 Duo E8200
Chipset Used: P965
CPUZ Validation : linky
Full Screen :

[ToyTen]

9.xxx Time Zone

4492.9......ToyTen................9.59.578...8x561 .....898mhz.....7-6-5-16....5/8...X48

[CCC]

for 32m there might be a new way for great scores

4x1024 with 1t action on the RE
no copywaza and as you can see from SS the subs can be tweaked alot more
7-6-5-16-1t @1.98v

a sub 4ghz time of 10min 50s range when all is tweaked 'note Im still a crappy pi guy', but tring to follow these guides online I hope to knock off alot more time

[George_o/c]

Hmmm, that might be interesting ...