Page 2 of 2 FirstFirst 12
Results 26 to 40 of 40

Thread: [Team.AU]E8600@ 6.2GHz, EP45-EXTREME, 1xGigabyte GTX280, Corsairs Dominators 3D Test

  1. #26
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by ZoLKoRn View Post
    Nice run nice results, Congrats Dinos
    thanks man
    see you next week
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  2. #27
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    high frequency should be the king of bandwidth if the 790i results hold true. obviously tighter mains helps but bandwidth is really a by-product of the chipset more than anything with memory clocks being second most important. CPU frequency helped a lot in 790i land if i recall but on the Rampage Extreme doesn't seem to do much but lower latency. i am kind of surprised by the numbers this P45 has put up at these clocks to be honest. this is the first time going over 930MHz with this chipset/board so i have a lot of investigating to do but it looks like SPi 32M might be decent here...if it continues to scale and i can get 600FSB+ tRD9 cooking.

    @Zolkorn...tRD 7, 266 strap, and high memory frequency (1070MHz) is the recipe
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  3. #28
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    i can get tRD=9 with DDR2 board at 600 with CAS4
    so that board should be capable of same too
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  4. #29
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    "should" being the operative word

    just ran 525x8 with the same settings as 525x7 and Read bandwidth was up 12850 MB/s and latency down to low 41ns. Write went up maybe 100MB/s, so CPU frequency is helping a little bit in Everest bandwidth on this board. should be interesting to see what ratios are/aren't working at 600FSB...assuming it will even get there. might have to give it a few liters of the cold stuff after classes this morning.
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  5. #30
    ODOC
    Join Date
    Aug 2006
    Location
    Copenhagen - Denmark
    Posts
    2,189
    Sweet work guys, good to see the boards are flying finally

    keep gigabyting it

  6. #31
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    HAHAHA keep Gigabyting it
    that's fantastic
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  7. #32
    Team ID - Indonesia
    Join Date
    Oct 2003
    Location
    Jakarta - Indonesia
    Posts
    832
    Great run dinos..... now EP45 and EP45T -Extreme shows some big improvement with new BIOS.

    @ 3oh6 : really sick B/W !!!!

  8. #33
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    congrats dinos... maybe try F7 bios ?
    ---

  9. #34
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    i hear F7 is a sick bios as well

    i donno what to try first

    EP45-Extreme
    EP45T-Extreme
    Skulltrail with dual QX9775s lol

    with 4870X2 cards
    decisions decisions
    hahahaha
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  10. #35
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by dinos22 View Post
    i hear F7 is a sick bios as well

    i donno what to try first

    EP45-Extreme
    EP45T-Extreme
    Skulltrail with dual QX9775s lol

    with 4870X2 cards
    decisions decisions
    hahahaha
    good to see someone else with "not enough time to test all the hardware" problems i face...except your stack of goodies seems a lot more favorable to what i am looking at
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  11. #36
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by dinos22 View Post
    i hear F7 is a sick bios as well

    i donno what to try first

    EP45-Extreme
    EP45T-Extreme
    Skulltrail with dual QX9775s lol

    with 4870X2 cards
    decisions decisions
    hahahaha
    start with EP45 Extreme might as well as it's already insulated

    Just started playing with my HIS HD4870x2, very nice cards indeed
    ---

  12. #37
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by 3oh6 View Post
    good to see someone else with "not enough time to test all the hardware" problems i face...except your stack of goodies seems a lot more favorable to what i am looking at
    Quote Originally Posted by eva2000 View Post
    start with EP45 Extreme might as well as it's already insulated

    Just started playing with my HIS HD4870x2, very nice cards indeed
    i'll make time when i come back from Taiwan
    i have to prep for the comp
    i have no idea how to overclock ATI cards nor do i know any LOD tweaks or anything>>>>hopeless
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  13. #38
    Turkey Man
    Join Date
    Mar 2005
    Location
    Jakarta (ex-Australia)
    Posts
    2,560
    Suggest you run EP45T for the next few days as practice.
    After this weekend on RE ill be switching to it also.

  14. #39
    Xtreme Mentor
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    3,035
    Nice run dino, those gigabyte boards are producing some awesome results
    Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
    Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X

  15. #40
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by CryptiK View Post
    Nice run dino, those gigabyte boards are producing some awesome results
    they are man
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •