View Poll Results: How long will the E8500 survive at 1.6V FSB Termination Voltage ( Vfsb aka Vtt ) ?

Voters
361. You may not vote on this poll
  • Less than 1 hour

    10 2.77%
  • Less than 6 hours

    4 1.11%
  • 24 hours

    16 4.43%
  • 2 days

    14 3.88%
  • 3 days

    6 1.66%
  • 5 days

    13 3.60%
  • 7 days

    24 6.65%
  • 12 days

    27 7.48%
  • 21 days

    19 5.26%
  • A month

    228 63.16%
Page 8 of 10 FirstFirst ... 5678910 LastLast
Results 176 to 200 of 240

Thread: The Wolfdale Vtt ( FSB Termination ) game.Place your bet!

  1. #176
    Xtreme Addict
    Join Date
    Nov 2006
    Location
    Red Maple Leaf
    Posts
    1,556
    My bet: Its not going to fry. You'll chuck it before it ever gets near.
    E8400 @ 4.0 | ASUS P5Q-E P45 | 4GB Mushkin Redline DDR2-1000 | WD SE16 640GB | HD4870 ASUS Top | Antec 300 | Noctua & Thermalright Cool
    Windows 7 Professional x64


    Vista & Seven Tweaks, Tips, and Tutorials: http://www.vistax64.com/

    Game's running choppy? See: http://www.tweakguides.com/

  2. #177
    Xtreme Member
    Join Date
    Dec 2007
    Posts
    104
    Sparta.
    Intel Core i5 2500K (L041A789) 5 Ghz@1.36V - 8GB Teamgroup Elite DDR3-1333@DDR3-1866-9-10-9-25 - Radeon HD6970@900-1400 - Asrock P67 Extreme4 (1.50) - Scythe Stronger Plugin 500W
    Intel Xeon E3110, 4.2Ghz@1.264V/4Ghz@1.168V - 4GB OCZ Platinum PC2-8500 CL5-5-5-15 - Radeon HD4870 - Gigabyte P35-DS3 (F14) - Seasonic SII 430W

  3. #178
    Xtreme Member
    Join Date
    Feb 2008
    Location
    Buenos Aires - Argentina
    Posts
    438
    Is not fry yet????

    Trust me......connect that CPU in to a battery car............It will be fry at the moment
    Intel C2D E8400 @ 4Ghz // Asus Maximus Formula x38 @ FSB 500Mhz// G.Skill Pi 2x2GB 1000Mhz // 9800GTX+ SSC eVGA // WD Raptor X 150GB + Samsung Spinpoint 2TB // DVD-RW DL Asus // Powercooler 850W // CM Cosmos S // Samsung T260N / Edifier R251 // Logitech G9 // Logitech G15 Rev2

    Cooling System: Swiftech Apex Ultra H2O Kit + MCW60

  4. #179
    Xtreme Member
    Join Date
    Dec 2004
    Location
    Austria
    Posts
    319
    i hope benchzoner will give us soon a little update... maybe one line... "all is up and running"
    1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro

    2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro

    5,0 Ghz LinX_Stable_Club

  5. #180
    Xtreme Addict
    Join Date
    Nov 2007
    Location
    Toronto, Canada
    Posts
    1,491
    Anything happening here?
    RIG 1 (in progress):
    Core i7 920 @ 3GHz 1.17v (WIP) / EVGA X58 Classified 3X SLI / Crucial D9JNL 3x2GB @ 1430 7-7-7-20 1T 1.65v
    Corsair HX1000 / EVGA GTX 295 SLI / X-FI Titanium FATAL1TY Pro / Samsung SyncMaster 245b 24" / MM H2GO
    2x X25-M 80GB (RAID0) + Caviar 500 GB / Windows 7 Ultimate x64 RC1 Build 7100

    RIG 2:
    E4500 @ 3.0 / Asus P5Q / 4x1 GB DDR2-667
    CoolerMaster Extreme Power / BFG 9800 GT OC / LG 22"
    Antec Ninehundred / Onboard Sound / TRUE / Vista 32

  6. #181
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Yeah, I'm bored to death watching all these rigs running fine after days of torture.
    I might raise the voltages more
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  7. #182
    Xtreme Addict
    Join Date
    Jul 2007
    Location
    ARIZONA
    Posts
    1,564
    [SIGPIC][/SIGPIC]
    PENT E8400 batch #814A014 ...4.3 at 1.34v~4.7 at 1.45v
    FOXCONN MARS
    COOLIT Eliminator 7*c idle~27~38*c load $95bucks !
    BUFFALO FireStix's ddr2-800 do 1200 eazy at 2.1v
    OCZ 2x2 kit pc2 8500 - 1066 @1069 atm
    Quattro 1000W
    Radeon 2-4850's in crossfire
    OCZ Vertex SSD thanks Tony!
    ALL PIPED INTO HOUSE AIRCOND ;}
    *QUANTUM FORCE* saaya & sham rocks !
    *REAL TEMP*
    At least you've got some Xtreme software now for working in Xtreme situations! "Unclewebb" rocks !
    *MEMSET* Felix rocks !
    *SUPER TEC MAN* UncleJimbo rocks !
    OVERCLOCKERS MAG..http://www.xtremesystems.org/forums/...d.php?t=197660

  8. #183
    Xtreme Mentor
    Join Date
    May 2008
    Posts
    2,554
    This is crazy! No degredation at all yet?

  9. #184
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Yeap, no degradation yet at all.
    Took 2 CPUs out and tried all the known Frequencies & Voltages settings ( also tried stock voltage & clocks ) from my first tests with them and they were as stable as they were on day 0.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  10. #185
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    man we should have some kind of award for best thread of the year

    i would most certainly nominate BZ's threads and this one really takes the cake for me heheh
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  11. #186
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    Houston
    Posts
    1,123
    Quote Originally Posted by railmeat View Post

    quoted from post 10....guess there wrong
    http://www.anandtech.com/weblog/showpost.aspx?i=428
    We tested 10 processors on three different boards, 3 died within five days, 2 showed serious degradation after 15 days (to the point they are no longer stable at stock settings), 1 showed light degradation after 25 days, four are still running fine and will under go degradation testing shortly. The failures were confirmed by Intel so there is no speculation as to the failure cause. We had six processors that developed problems and four that have not to date. Also, our test regimen stresses the platform in a variety of ways under varying conditions, not a single test running in a controlled loop. Whether that plays into the failures is something we are still investigating along with the chipset and board components.
    Last edited by bingo13; 10-06-2008 at 08:51 PM.

  12. #187
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Gary you never said that in the past
    when did these tests get done
    any more info on setups and testing methods
    it's something that BZ can try too i guess if he can be arsed heh

    didnt you guys claim going to 1.5vtt would damage the CPU after a day .... my memory is a bit weak atm?
    Last edited by dinos22; 10-06-2008 at 09:02 PM.
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  13. #188
    Xtreme Addict
    Join Date
    May 2008
    Location
    Land of Koalas and Wombats
    Posts
    1,058
    There's most likely a larger probability of the VRM circuitry or should I say flaws of being the culprit of cpu death than is set voltage itself. Voltage overshoot beyond acceptable tolerances of the set voltage will likely cause the reported degradation at a more rapid rate. This is just my personal opinion anyway. Good luck on the closed loop testing!

    DFI LT-X48-T2R UT CDC24 Bios | Q9550 E0 | G.Skill DDR2-1066 PK 2x2GB |
    Geforce GTX 280 729/1566/2698 | Corsair HX1000 | Stacker 832 | Dell 3008WFP


  14. #189
    Muslim Overclocker
    Join Date
    May 2005
    Location
    Canada
    Posts
    2,786
    Quote Originally Posted by bingo13 View Post
    We tested 10 processors on three different boards, 3 died within five days, 2 showed serious degradation after 15 days (to the point they are no longer stable at stock settings), 1 showed light degradation after 25 days, four are still running fine and will under go degradation testing shortly. The failures were confirmed by Intel so there is no speculation as to the failure cause. We had six processors that developed problems and four that have not to date. Also, our test regimen stresses the platform in a variety of ways under varying conditions, not a single test running in a controlled loop. Whether that plays into the failures is something we are still investigating along with the chipset and board components.
    what voltages?

    My watercooling experience

    Water
    Scythe Gentle Typhoons 120mm 1850RPM
    Thermochill PA120.3 Radiator
    Enzotech Sapphire Rev.A CPU Block
    Laing DDC 3.2
    XSPC Dual Pump Reservoir
    Primochill Pro LRT Red 1/2"
    Bitspower fittings + water temp sensor

    Rig
    E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB


    I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.



  15. #190
    Xtreme Addict
    Join Date
    Nov 2006
    Location
    Red Maple Leaf
    Posts
    1,556
    So is it dead yet?
    E8400 @ 4.0 | ASUS P5Q-E P45 | 4GB Mushkin Redline DDR2-1000 | WD SE16 640GB | HD4870 ASUS Top | Antec 300 | Noctua & Thermalright Cool
    Windows 7 Professional x64


    Vista & Seven Tweaks, Tips, and Tutorials: http://www.vistax64.com/

    Game's running choppy? See: http://www.tweakguides.com/

  16. #191
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    i think it's been long enough to prove that dual cores arent affected but high VTT volts even after a long time

    dual core CPUs is where VTT is very important so let's move onto something new now

    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  17. #192
    Banned
    Join Date
    Oct 2006
    Location
    Haslett, MI
    Posts
    2,221
    Well, MYTH BUSTED!

  18. #193
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Finland,
    Posts
    324
    Well, who is the next guy who tests this on quad ?
    Asus P5Q-E @ 1306 Ket's handwork
    Intel® Core™2 Quad 9550 3600Mhz -1.28v load- FPO: 816xxxxx
    Xigmatek HD1283 -> 30-33 IDLE / GAMING 45*C
    Sapphire 4870 512MB If you want feel like in aeroplane, turn fan to 100% that is what i call xtreme
    A-Data 2X2GB 850mhz 1:1 damn budget
    Corsair HX520W Small but powerfull
    Antec 300
    Noctuas casefans <3 Silence
    WD 640GB

    Eizo Flexscan S2201W 22''

    3DMARK 06 (+17000)
    Vantage (+10000)
    Best SuperPI time @ 3.6Ghz

  19. #194
    Xtreme Addict
    Join Date
    Mar 2007
    Posts
    1,377
    I wonder how it would do with 1.8+ pll for a while.

  20. #195
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Quote Originally Posted by mrcape View Post
    I wonder how it would do with 1.8+ pll for a while.
    Still running fine ( I have a system running at... way higher Vpll than 1.8V ).

    On the other side I'm afraid that I'll have to stop some of the systems to use the components in some reviews and articles that I have to get done soon.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  21. #196
    Banned
    Join Date
    Feb 2006
    Location
    Hhw
    Posts
    4,036
    Quote Originally Posted by BenchZowner View Post
    Still running fine ( I have a system running at... way higher Vpll than 1.8V ).

    On the other side I'm afraid that I'll have to stop some of the systems to use the components in some reviews and articles that I have to get done soon.
    You know what I would love, for you to combine all the testdata from the past month or so from all systems into an article with all the results you got in the mean time. Benches with volts all with the dates done ect, pic's off all and that's that... wait on Anand/Intel to tell us your testing is flawed, or otherwise an explanation on the diffrent outcome's

    Nice thread Would make an even nicer article though

  22. #197
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Quote Originally Posted by Marvin_The_Martian View Post
    You know what I would love, for you to combine all the testdata from the past month or so from all systems into an article with all the results you got in the mean time. Benches with volts all with the dates done ect, pic's off all and that's that... wait on Anand/Intel to tell us your testing is flawed, or otherwise an explanation on the diffrent outcome's

    Nice thread Would make an even nicer article though
    I could do that, and yeah it'd be nice to have it summed up in an article, but... sadly I have some hardware reviews that have to be done soon, actually ASAP, and 5 of them are motherboards... and that's pretty much about 120 pages of text and hundreds of hours of testing & benchmarking.

    By the time I get done with the hardware that I have here to review, we'll be in the Nehalem era, and I don't know if it'll be that interesting for the readers then.

    We'll see...
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  23. #198
    Xtreme Enthusiast
    Join Date
    Sep 2007
    Location
    CA Bay Area
    Posts
    915
    lol I dont beleive this "degregation" myth- I ran my 4800+ Toledo at 1.6v with an air cooler for a year and it never hiccuped until my via board's network controller took a dump.

  24. #199
    Banned
    Join Date
    Feb 2006
    Location
    Hhw
    Posts
    4,036
    Quote Originally Posted by BenchZowner View Post
    I could do that, and yeah it'd be nice to have it summed up in an article, but... sadly I have some hardware reviews that have to be done soon, actually ASAP, and 5 of them are motherboards... and that's pretty much about 120 pages of text and hundreds of hours of testing & benchmarking.

    By the time I get done with the hardware that I have here to review, we'll be in the Nehalem era, and I don't know if it'll be that interesting for the readers then.

    We'll see...
    Depends, not everyone will jump on nehalem I think. But I understand the time constraint, to bad the longer you wait with something the less relevant it becomes hehe, been experiencing that myself lately to

    But another note, seeing the intrest you got with this thread, it might be even better pr for you to combine this all into one article then doing those 5 mobo reviews

  25. #200
    Iron Within Iron Without
    Join Date
    Dec 2007
    Location
    EU - Czech republic
    Posts
    1,123
    BZ I'm sorry for calling you an CPU destroyer, busting this Myth you farted intro Intels smile and I clap for that.
    But there is one thing that should concern al Silicium based things on this planet. You will eventualy get them and OC the crap out of them ...
    And I don't want an BZ Microwave ! *Runs on 1020V consuming 24A but turning diamonds intro coal and back.

    Well I think this "test" is over and somehow "busted", feel free to grab a couple of Quads and OC and Overvolt the hell out of them. I'll subscribe that !
    Sony PS3 | Nintendo Wii + Nintendo Wii Fit

    By Mercedes - Adventure Trips around Middle Europe in a Youngtimer | https://www.facebook.com/S.Mercedesem - Like Us, if you Like us that is

Page 8 of 10 FirstFirst ... 5678910 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •