guys is it possible to mount the PSU on top instead of the bottom?
the only reason for me to not get the HAF is that i actully dont want to kill my PSU with dust if its gonna act as a vacuum cleaner at the bottom of the case suckin in everything thats under the case...
---
---
"Generally speaking, CMOS power consumption is the result of charging and discharging gate capacitors. The charge required to fully charge the gate grows with the voltage; charge times frequency is current. Voltage times current is power. So, as you raise the voltage, the current consumption grows linearly, and the power consumption quadratically, at a fixed frequency. Once you reach the frequency limit of the chip without raising the voltage, further frequency increases are normally proportional to voltage. In other words, once you have to start raising the voltage, power consumption tends to rise with the cube of frequency."
+++
1st
CPU - 2600K(4.4ghz)/Mobo - AsusEvo/RAM - 8GB1866mhz/Cooler - VX/Gfx - Radeon 6950/PSU - EnermaxModu87+700W
+++
2nd
TRUltra-120Xtreme /// EnermaxModu82+(625w) /// abitIP35pro/// YorkfieldQ9650-->3906mhz(1.28V) /// 640AAKS & samsung F1 1T &samsung F1640gb&F1 RAID 1T /// 4gigs of RAM-->520mhz /// radeon 4850(700mhz)-->TRHR-03 GT
++++
3rd
Windsor4200(11x246-->2706mhz-->1.52v) : Zalman9500 : M2N32-SLI Deluxe : 2GB ddr2 SuperTalent-->451mhz : seagate 7200.10 320GB :7900GT(530/700) : Tagan530w
to answer your question, Yes!Originally Posted by AAbenson
guys is it possible to mount the PSU on top instead of the bottom?
the only reason for me to not get the HAF is that i actully dont want to kill my PSU with dust if its gonna act as a vacuum cleaner at the bottom of the case suckin in everything thats under the case...
if you have a look at the photo's of the back of the case, you can clearly see the watercooling rubber gromets on the plate blocking it
As stated by Gaz, you can mount it on the top or bottom. I will have mine on the bottom but have already cut some sheets of mesh that easily fit in the space between the PSU mounting plate and the bottom of the case. I also cut some for the front 230. Don't know the name of this stuff but it was the cheap stuff that I got from Wally world.guys is it possible to mount the PSU on top instead of the bottom?
the only reason for me to not get the HAF is that i actully dont want to kill my PSU with dust if its gonna act as a vacuum cleaner at the bottom of the case suckin in everything thats under the case...
Axis
QX6700 @ 3.5
DFI LP LT X48
TRUE
2x2gig Corsair Domms PC2 8500
EVGA 8800GTS (G92) @700/1000
CM690 (HAF 932 under construction)
OCZ 600W
Posting Permissions
Reply With Quote
Bookmarks