Building a Sossaman rig?

[s0lid]

Whoa... HAPPY BIRTHDAY s0lid!!!

s0lid

s0lid

230w is enough for this system. (you'll need an 8-pin plug though!)

I'm going for a 400w 80+ efficient psu. Should be at 80% efficiency at 100w load.

Thx mates
Just checked: psu don't have an P4 connector...
But now i got good reason to remove one molex rail and replace it with 8pin ESP connector from this:


Elfa had those connectors in stock early this year but can't find em from their website... Need to start reading the 5kg elfa 2008 catalog

[s0lid]

I was just getting ready to make a thread for Frish so you get one also. Unhide your bday next time :P

Ya i tried to look for that option...
E: found it...

[Martijn]

s0lid

230w is enough for this system. (you'll need an 8-pin plug though!)

I'm going for a 400w 80+ efficient psu. Should be at 80% efficiency at 100w load.

Just get a 4-pin to 8-pin coverter like I did.

[Movieman]

Hey, I figurfed how we get even with Martijn for being greedy with those chips..
We send him all but the heat sinks......
Talked with OEMXS today. Going there tomorrow am and grabbing 10 HS

[Martijn]

Hey, I figurfed how we get even with Martijn for being greedy with those chips..
We send him all but the heat sinks......
Talked with OEMXS today. Going there tomorrow am and grabbing 10 HS

Dave, you do realize that I have FOUR chips right here?

You DO realize that instead of selling them to S0lid, I could sell them locally for triple the prize instead?

You DO realize that I could have my own sinks shipped to me then?



Oh and those Sammies won't need heatsinks LOL!

[NaeKuh]

Oh and those Sammies won't need heatsinks LOL!

Did you miss my entire coment at the start of this post?

Rule 1: Dave is always correct
Rule 2: No you are not correct
Rule 3: I thought i was like you, Smarter then dave. But when you think your right, follow rule 1

Do i need to show this failed picture again?

[Martijn]

LOL, didn't it work out?

Rule no. 4: never admit to Dave he was right after all

[NaeKuh]

LOL, didn't it work out?

Rule no. 4: never admit to Dave he was right after all

no, the HR-05 was a complete failure..

thats why i said follow rule 1 when you think your correct.

[Martijn]

no, the HR-05 was a complete failure..

thats why i said follow rule 1 when you think your correct.

As long as I won't need to call him

[NaeKuh]

As long as I won't need to call him

well when your sitting there scratching your head going WTF how come its not working.

Thats your only option left.

Thats why listen to dave from the getgo and you avoid the phonecall.

[s0lid]

Yupp.. those HR-05s crushed cpus right?

[Movieman]

As long as I won't need to call him

Rule#5;
I will need to speak with you personally to confirm shipping address.

[Martijn]

Rule#5;
I will need to speak with you personally to confirm shipping address.

Thank goodness that's the job of Jaco and he already has my address

[s0lid]

Thanks goodness that's the job of Jaco and he already has my address

Poor Jaco now movieman has call to him!

[Martijn]

Poor Jaco now movieman has call to him!

That ain't my problem

[Jaco]

Dave, you do realize that I have FOUR chips right here?

You DO realize that instead of selling them to S0lid, I could sell them locally for triple the prize instead?

Hey be nice you !! They're reserved for s0lid .
It's s0lid's birthday today you know
And I have your adress , Barendrecht is not that far

[Martijn]

Hey be nice you !! They're reserved for s0lid .
It's s0lid's birthday today you know
And I have your adress , Barendrecht is not that far

Oh, you are going to bring the hardware to me? How nice!

[NaeKuh]

Yupp.. those HR-05s crushed cpus right?

nah..

the surface area on the HR-05 is not large enough to keep both cores stable.


Happy Bday Solid.

[Movieman]

Oh, you are going to bring the hardware to me? How nice!

No, he isn't and if your not nice, guess who Jaco gives your telephone number to?.....Meeeeeeeeeeeeeeeeee!

[Movieman]

No, he isn't and if your not nice, guess who Jaco gives your telephone number to?.....Meeeeeeeeeeeeeeeeee!

nah..

the surface area on the HR-05 is not large enough to keep both cores stable.


Happy Bday Solid.

Did they work on the NB and SB??

[s0lid]

No, he isn't and if your not nice, guess who Jaco gives your telephone number to?.....Meeeeeeeeeeeeeeeeee!

Good thing than i haven't given my phone number to anyone on xs

[Movieman]

Good thing than i haven't given my phone number to anyone on xs

What? You think that Xs is my only source for tel numbers?

(Tweety bird voice)
"You don't know me very well do you?"

[NaeKuh]

Did they work on the NB and SB??

very well. I still have them on those.

[Bobsama]

*67(dave's phone number) + SEND. I've done that before.

[Movieman]

Ahh, God bless FedEx!
Guess what just showed up a day early?
Four nice pretty Intel Sossaman boards.
Now I've just decided that since our good friend Mr.Martijn is known as Mr. Boardburner that I should only send three and keep his for extensive testing.
Say 2-3 months should do it!

very well. I still have them on those.

How good do they work on the NB and SB as I did notice those generating a lot of heat. Also how difficult was it to pull the factory NB and SB sinks?