Page 35 of 46 FirstFirst ... 253233343536373845 ... LastLast
Results 851 to 875 of 1135

Thread: Asus P5E3 Premium Wi-fi-AP

  1. #851
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    I would like to know if there was a newer BIOS than the actual last 0505 available for This Premium Motherboard.

    Not on the asus ftp download site neither on asus global.

    Any other place to look at ?

    Thx

  2. #852
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,707
    Same here...a new BIOS with some FSB and RAM improvements would be great.
    Weissbier - breakfast of champions



  3. #853
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    132
    Quote Originally Posted by JohnnyV View Post
    isn't it the 1T CR that is acting up?
    I think it's pretty nice to get 2ghz with 1T.
    1T vs 2T makes little difference in the stability over 2000 MHz. The board just isn't tuned for 2000+ MHz, but it can be done, with the right ram and lots of voltage.

  4. #854
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    Here is my last Spi1m for tonight:


    CPU under water, NB ->air and memories -> aircooling too. Some 1.69vnb if i do remenber correct I've been changing that value soo much in a short time, but only between 1.65v & 1,73v

  5. #855
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    belgium
    Posts
    1,735
    say any off u guy's tested bios coldbugs ???
    seems here that the board coldboot's my cpu @ -100°C and CB @ (dont know if its board or cpu) -120°C .
    also the chipset kicks out @ -20°C , idd a new or beter sayed modded bios would be nice .

  6. #856
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    Quote Originally Posted by blind_ripper View Post
    say any off u guy's tested bios coldbugs ???
    seems here that the board coldboot's my cpu @ -100°C and CB @ (dont know if its board or cpu) -120°C .
    also the chipset kicks out @ -20°C , idd a new or beter sayed modded bios would be nice .
    Hi Blind

    If you are motorized, I have one week off and if you want, you an come arround here. I can test temperature only till -60°C so I can't say at all. No probs for me atm. PM me if interested

  7. #857
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    belgium
    Posts
    1,735
    i have cascade at home and ln2 if i want to , testing is not a problem.
    yesterday the board whase acting strange :s , think it slakking

  8. #858
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    Quote Originally Posted by blind_ripper View Post
    i have cascade at home and ln2 if i want to , testing is not a problem.
    yesterday the board whase acting strange :s , think it slakking
    oki, nice, maybe we will arrange a meeting or so

    Arff, too bad mine went dead yesterday morning, 'have to RMA it. I ordered a second one in case of..., it is simply my favorite board among all.

    Cheers

  9. #859
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    Best fsb Super Pi 1m at this time: cpu ->water(h²o@20°C/nb->air(12cm) )



    Best Super Pi 32m same conditions. I could try to set less Vcore, I wanted to finish it



    Notes that I use the strap400 which is completely bugged with X48 boards and ram frequency is at the 5/8 divider: 976 instead of that 1016.

    My bad, 2x cpu nail

  10. #860
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,707
    Nice bro...very nice
    Weissbier - breakfast of champions



  11. #861
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    Quote Originally Posted by Monstru View Post
    Nice bro...very nice
    Thanks a lot, these results are worth the effort

    I absloutely need the CPU skew at delay 300 and the BN skew at normal to achieve this. No boot without them.

    I can't finish one at 618 fsb with setfsb... Not exact in round all the time, do you think tweaking more these skews or I don't know what else might help?

    WE NEED A NEW BIOS

  12. #862
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400



    151. SuperPi 32m - 9min 31sec 360ms - ToyTen (JMax-Hardware) - (Core 2 E8600 (3.33G... @ 4901mhz on h2o) - 9.8 points

    wOOOOOt

  13. #863
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,707
    We need a new, better bios
    Weissbier - breakfast of champions



  14. #864
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    belgium
    Posts
    1,735
    monstru did u test (see) any strange coldbug behavior ?

  15. #865
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,707
    Unfortunately I didn't have the chance yet to put this baby to real cold. When I start testing this rig with LN2 I will report the behaviour.
    Weissbier - breakfast of champions



  16. #866
    Xtreme Member
    Join Date
    Dec 2007
    Location
    Ulsan, Korea
    Posts
    101
    Quote Originally Posted by ToyTen View Post



    151. SuperPi 32m - 9min 31sec 360ms - ToyTen (JMax-Hardware) - (Core 2 E8600 (3.33G... @ 4901mhz on h2o) - 9.8 points

    wOOOOOt
    3:5 divider no good~
    If you run everest bandwidth, you know that~
    3:5 divider show clock higher than 5:8 divider~
    But bandwidth is same both~
    That also need same dimm voltage~


  17. #867
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    It is in deed the misreading of cpu-z and also Everest. It is well the 2/3 divider that's in use here. Strap400 gives me that since I am on X48 boards (Evo and Premium).
    what is your vddr ?
    I love your 32m score man
    Last edited by ToyTen; 09-15-2008 at 09:33 PM.

  18. #868
    Xtreme Member
    Join Date
    Dec 2007
    Location
    Ulsan, Korea
    Posts
    101
    Quote Originally Posted by ToyTen View Post
    It is in deed the misreading of cpu-z and also Everest. It is well the 2/3 divider that's in use here. Strap400 gives me that since I am on X48 boards (Evo and Premium).
    what is your vddr ?
    I love your 32m score man
    Thx, I like 32M running~
    bios set vdimm 2.1v~
    Mem was CSX Diablo3 DDR3-2000 kit (D9GTR)~

  19. #869
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    hmm, good memories you have there

    I had to sell my Evo 'cuz it was way to bugged under al tested bioses Premium accepts allmost all I ask.
    me likes 32m too

    bye

  20. #870
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Belgium
    Posts
    400
    I did some 2 hours benching with an auto-cascade@-50°C average.

    Queen mobo
    E8600
    Cell Shock 12800 7-6-6-18
    MSI OC 3870x2

    3DM05:


    3DM01: (not too good)


    Spi32m:


    Spi1m:


    Aquamark @ 5,7Ghz ddr3 855 cas7-6-6-18-1T gpu's not oc as above :


    cpu-z@ 1.77Vcore:

    valid cpu-z 1.47: http://valid.x86-secret.com/show_oc.php?id=418463

    That was fun
    DiKKeneK fan !!

  21. #871
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,707
    Nice ones bro
    Weissbier - breakfast of champions



  22. #872
    Xtreme Member
    Join Date
    Dec 2007
    Location
    Ulsan, Korea
    Posts
    101
    Good results~

  23. #873
    Registered User
    Join Date
    Oct 2007
    Posts
    14


    Full air cooling PL9 on my P5E3 premium for 1,85v NB (Nb @ 76°c lol)

  24. #874
    Registered User
    Join Date
    Jan 2005
    Posts
    83
    My i ask you to post your Bios Settings ?

  25. #875
    Registered User
    Join Date
    Sep 2008
    Posts
    7
    I'm having a boot issue. Every time I change a BIOS setting the system hangs.

Page 35 of 46 FirstFirst ... 253233343536373845 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •