CSX DDR3 arrived: Diablo 2000MHz & CEC 1333MHz kits first look

[Computerville]

Can this kits do CAS 5/6?....try it please....

- Nah, tCL5 is the working title for DDR2. ^_^

[Achill3uS]

I've got some 2x1GB Diablo kit with GTS, and some of the new CEC 1600 kits with somekind of Samsung (HF9H if i remember)
so i will write some oc reports asap

[Computerville]

D9GTS?

Yeaa for sure,

[slim142]

Does anybody know if this Diablo will do 1800Mhz 6-6-6-18 2T with 1.90vdimm on a 790i?

If not, whats the best that it would be able to run with 1.90v?

[tomati]

I've got some 2x1GB Diablo kit with GTS, and some of the new CEC 1600 kits with somekind of Samsung (HF9H if i remember)
so i will write some oc reports asap

GTS on 2 x 1GB kit , damned , did CSX changed their chips on retail kit too or is it just a sample one ?

[Achill3uS]

Does anybody know if this Diablo will do 1800Mhz 6-6-6-18 2T with 1.90vdimm on a 790i?

If not, whats the best that it would be able to run with 1.90v?

18000 6-6-6 @ 1.90v haha if you will find a kit wich could do this tell me
1.9v in cas6? around 1600 i think, but only 2x1GB GTR or GTS from Diablos...

[Achill3uS]

GTS on 2 x 1GB kit , damned , did CSX changed their chips on retail kit too or is it just a sample one ?

no its retail, GTR is out of, so new 2x1 kits has GTS now
yesterday tested a bit with it on P45 (P5Q3) and it goes really well...
1800 7-6-5-18 1.96v memtest stable

[tomati]

no its retail, GTR is out of, so new 2x1 kits has GTS now
yesterday tested a bit with it on P45 (P5Q3) and it goes really well...
1800 7-6-5-18 1.96v memtest stable

Great news,

you have a MP

[Oliver]

Sounds interesting about the gts kit Bala, will look forward to see more numbers

Keep pushing it

[BulldogPO]

Yes, my kit is also equiped with GTS chips.

[slim142]

18000 6-6-6 @ 1.90v haha if you will find a kit wich could do this tell me
1.9v in cas6? around 1600 i think, but only 2x1GB GTR or GTS from Diablos...

What was I thinking?

As long as I get more than 12k on Everest Reading with no more than 1.90 I would be happy.

Does anybody know if this are coming any time to US? I had a phone number but the person does not answer

[Zeus]

Ordered 2x1GB kit, i hope they will be good with this Rampage Extreme, the results i see here make me drool.

[rabor]

Mine are dying on a Rampage Extreme. They did 2000+ MemTest86+ 10 passes when I got them, now they hardly hold up at 1800..

2nd pair for RMA..

[Zeus]

Mine are dying on a Rampage Extreme. They did 2000+ MemTest86+ 10 passes when I got them, now they hardly hold up at 1800..

2nd pair for RMA..

Uh?

At what voltage?

[slim142]

Well all the ROG Motherboards are known to be overvolting the RAM, so if u put in 1.90 in BIOS, it really is 1.96. Just imagine if you think you are running your RAM at 2.00....

[rabor]

I ran 'em under factory-specs (2.125V) at 1.98V max 24/7.

The Striker II Extreme overvolted .04 to .05V, the Rampage X doesn't.., it's spot on.

[Zeus]

That's what i thought, both the LCD poster and Asus Probe show about the same what i set in bios.

Didn't measure with DMM though,maybe someone can point me to the measure point for Vdimm?

Rabor, did you have active cooling over them?

[slim142]

Well, I know for sure I will put fans on top of them (OCZ RAM Fan)
Also, I will run them no higher than 1.90 (1.84 in BIOS)

This pair is expensive, and we all hate RMAs

[over@locker886]

I got new, 2GB Diablo3-2000Mhz kit (Micron D9GTS) from CSX.

Thank you Compustocx!

This new kit very powerful..

2100Mhz 7-6-6-18 1T 2,262v , screenshot.



2000Mhz 7-6-6-18 1T 2,183-2,196v, SPi 8M

[Zeus]

Fantastic result man, can you do 32M 2000 7-6-6 too?

Rampage Extreme and this mem seems 2B the perfect combo!

[tomati]

Hi,

OMG these D9GTS kit are awesome, they seems to be the only one that can bench at 2000 cas7


Tried first some stability on my D9GTR kit

My best so far: 1828 @ 2.1v 7-6-6-18-1T



Stability at spec settings was fine too

1828 @ 1.9v 8-7-6-15-1T



2000 @ 2.1v 8-7-6-19-1T worked too

But max cas 7 was a bit disappointed, only 1010 for my best stick ( 1003 for the other one) [7-6-6-15-1T with 2.2v] and not benchable

Tested on P5E3 Premium.

[Oliver]

its also depending on your board tomati, you need a good board to bench 1g+ cl7

but ya the sticks are amazing

[M3kk]

I got my 2 x 1G kit today too ( Diablo 2000 ), but they are with D9GTR .

Will test them later.

[Oliver]

doesn't mean they are bad m3kk

[Kasparz]

Try 7-6-5-18 not 7-6-5-15 at 2GHz+. These IC's doesn't like very low TRAS at high speeds. And yes, good board and lots of voltage for MCH is a must for 2GHz cl7.