Water Cooled Case Gallery

[cnssjw]

Hi All

Thought I would post some pics of my first effort at watercooling, inspired by much reading of Xtreme Systems forums and based on the CM Cosmos S RC1100 case, which I just LOVE

Please check out the pics here, thanks.
http://the-marine-gets-wet.blogspot.com

Cheers

[jiggyghallam]

Great system, but why do you have UV cathodes, nothing seems to be reactive in your case

the dye was meant to be UV reactive but maybe i need to add more

the cathodes were there before when i had my green UV watercooling setup. I really want it to be super reactive but the cathodes dont seem to cut it


heres a few more pics in the daytime and one with the PC off

[MomijiTMO]

I do love your rad creation on the wall

[jiggyghallam]

I do love your rad creation on the wall

i didnt have space in my PC or behind so the wall looked good, i was just glad the rad fitted in it, i made it before i got the stuff i have a front pic here

[CyberDruid]

The wallhanger external rad. That's right up my alley...(heads to shop)

[|Oc|REvO_HsArC]

Beware, what you are about to see is not up to this thread standards.
Here is my cheap ghetoish system.
I wanted everything small, portable and compact for lan parties. so I Built a double 240 radiator Radbox inside a regular atx case!




Here is the rad box. Completely isolated from the rest of the case.
On the right side is the 1st 240 radiator. Fans pushing fresh air from the outside.


Here is my 2nd 240 radiator. Fans also pushing fresh air from the outside. You can see the exhaust of the radbox on the left side of the case. All hot air from the rads goes out through there.


Here's a closeup to the rad box exhaust and insides



Here's the rest of the loop. Notice how the hd4870 bends from the EK block weight. I can't get good contact. My memio is 15c higher.


finally, the box closed with the proper case cuts to ventilate the internal radbox.





Silently on its place

[MomijiTMO]

You know when you whack the side panels on it looks alright. But the fan controllers really had me going though

[BlackHouse]

HI

















http://img144.imageshack.us/img144/3715/dsc0046gm8.jpg

http://img387.imageshack.us/img387/2365/dsc0048re5.jpg

http://img145.imageshack.us/img145/2271/dsc0051hu1.jpg

http://img78.imageshack.us/img78/1125/dsc0071jp4.jpg

[|Oc|REvO_HsArC]

silverstone really suits watercooling hum? beautiful


hey, fan controllers are the shiznit! (and were for free)
I have to find a cheap 3.5" bay fan controller, that's why I have these zalman but they work Ok

[HaGGaRd]

wow im so impressed by what ive seen on some of these pictures, good job

[RADCOM]

Extremely aesthetically pleasing build Blackhouse. Is that the XPSC aluminium reservoir in Black? They will certainly flay you for that here lol.

[inCore]

|Oc|REvO_HsArC, your rig is beautiful, simply beautiful. I love people like you (no manlove).

Blackhouse, yours isn't bad either.

[TedShred]

love the rig, blackhouse

that finned reservoir looks sweet! (looks like it should be under the hood of a sportscar)

[Tremeloes]

twins...

[skinnee]

Those are some damn good photos!!!

Nice work!

[mpower1001]

I love the tubing...Sweet

[RADCOM]

Great photos great designs. Well done m8

[aspms*]

Case: Lian Li PC-G7
Pump: Laing DDC3.1
CPU: D-Tek Fuzion with Pro Mount & washer
NB: EK Water Blocks NB/SB 5
VGA: AquaXtreme MP-1 GFX
Hose: Masterkleer 7/16"
Fitings: EK HighFlow Fitings 1/2"
Radiator: XSPC RS240 with 4x Yate Loon D12SL-12 @ push-pull & XSPC RS120 with Sharkoon SE1000
Fan controller: Zalman ZM-MFC1 Plus
Reservoir: XSPC reservoir top

[silverphoenix]

Case: Lian Li PC-G7
Pump: Laing DDC3.1
CPU: D-Tek Fuzion with Pro Mount & washer
NB: EK Water Blocks NB/SB 5
VGA: AquaXtreme MP-1 GFX
Hose: Masterkleer 7/16"
Fitings: EK HighFlow Fitings 1/2"
Radiator: XSPC RS240 with 4x Yate Loon D12SL-12 @ push-pull & XSPC RS120 with Sharkoon SE1000
Fan controller: Zalman ZM-MFC1 Plus
Reservoir: XSPC reservoir top

some advice great build but don't insulate the bottom of the pump like that.

[Rapt0r]

aspms* may I know what coolant you are using?

[bundymania]

The Nickelgang

[aspms*]

some advice great build but don't insulate the bottom of the pump like that.

I have one Sharkoon Silent Eagle 1000 in front blowing straight on pump so no worries about heat! And I have made similar wc loops for my friends with exact the same insulation for pump and there are no problems at all- one of those pumps is currently running for more than a year now! And it
absorbs all the noises and vibrations very well!

aspms* may I know what coolant you are using?

I don't know original manufacturer- it came with aquatuning.de label but AFAIK they don't produce stuff like that by themselves! It's listed here: http://www.aquatuning.de/product_inf...LLOW-50ml.html

Actually in real life this coolant and my whole rig looks more dark and better in my opinion than in my photos, I just cant set right settings for my camera to make good photos!

[andressergio]

Hey guys

I put the 8800GTX in the loop, the Q6600 temps where not hurt at all and the 8800GTX with 1,5vgpu went up stable 3dmark06 loops and vantage at 702 /1836/1053...at 47C IDLE / 54C LOAD with 23C ambient, i had 52C IDLE / 69C stock clocks (575/1350/1800) with air stock cooled

here are some pics

[dnottis]

Just redid mine with PA120.3 (from PA120.2) and GTX 260. Holes are cut underneath the PA120.3. Using medium speed yates in pull. Went with Pentosin G11 this time, blue over the HydrX green.

Specs:
Q6600 G0 L745A @ 3.825Ghz (1.45v actual)
Asus P5K-E/WiFi Pencil modded vdroop (Bios rev. 1102)
G.Skill PC2-8800 DDR2-1100 4096MB Memory
1/2" ID Masterkleer tubing, Swiftech MCP-655, Thermochill PA120.3 Rad, D-Tek FuZion pro mounted, FuZion GFX 2
Thermaltake ToughPower 1000watt PSU
PNY GTX 260 756 core /1242 memory /1566 Shader
X-Mystique 5.1 Digital Dolby Sound Card
Acer X222Wbd 22" LCD
WD 640GB WD6400AAKS HD

[zlojack]

Looking good Andres Sergio!