Hi. does anyone know if this mobo plays nice with CORSAIR DOMINATOR DHX Technology TWIN2X4096-8500C5DF 4GB PC2-8500
Considering that little package..
Thanks
Hi. does anyone know if this mobo plays nice with CORSAIR DOMINATOR DHX Technology TWIN2X4096-8500C5DF 4GB PC2-8500
Considering that little package..
Thanks
It seems that not ALL PLUS have the A3 revision of chipsetso do any one have non plus MB here with A3?
Last edited by Spacemaster; 09-05-2008 at 01:38 PM.
Is it good or bad thing?Originally Posted by Spacemaster
It seems that not ALL PLUS have the A3 revision of chipset
i5 2500K @ 4,5 w/ Kühler 920
Asus P8Z68-V PRO/GEN3
4x4Gb Kingston HyperX @ 1600MHz CL9
PNY GeForce GTX 680
SDD + HDD
Auzentech X-Fi Forte 7.1
Corsair HX620W
Fractal Design Define R3
No boards I know of ever had an A0 or A1 chipset. So as the A3 chipsets came out they being pin-compatible were just put in when all older A2 chipsets were gone and then all boards built would have A3 chipset. They do not stop an assembly run just because A2 ran out...they went to A3 and continued on so you could see plus with A2 and A3 but now all produced would be A3 across the spectrum. So far I cannot really see a difference at least as a result of A3 chipset.
Back and forth from board to board it seems.
I think that is "litle" bat think, because A3 is cooler than A2!
Tomorrow I will get one non plus with A2, and my friend From DFI sector in Serbia promise me that he will get me one PLUS wit A3. So I will compare this two babes.
AU price gouging @ its bestYeah ive noticed this too.
With the release of the DFI P45 JNR at ~$200 AUS
The normal version gas gone up to ~$220 AUS
They used to be ~$150 AUS
I got my PLUS for $159 @ PCCase Gear but now they are selling for $199 so still cheaper than most with the Jnr only $179
The price increase is partly due to the AU$ freefall
Last edited by alpha0ne; 09-05-2008 at 09:49 PM.
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
I got rid of my P5K-E and bought a T2RS+.
I'm very much impressed by this board. This is my first DFI.
This is what I got yesterday.Today I'll try more.
http://valid.x86-secret.com/show_oc.php?id=413635 on air
Also I read on this thread (last reply on the page) that the A3 revision is a bug in CPU-Z. Is this true?
Last edited by Blackoberst; 09-05-2008 at 11:34 PM.
Got one as well , Rev3 Bios date 07/08/2008 .
Cant get rid of half multi for some reason .
I will try latest bios to see if it fixes the problem.
Did someone flash Bios of plus version to non plus? Does it work?
The XS member loc.o has been playing with the P45 PLUS using a little LN2
640FSB anyone
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
I think about that to. So dose any one do that?
Its a nice mobo..
Mine can reach 650 x 7 on air..
Validasi : http://valid.x86-secret.com/show_oc.php?id=413589
@roedzzz
Can you please sher all setting with us?
I am stuck with 595 MHz, and waiting new mem because this transcend is one piece of sh...
@ roedzzz
can you tell me your settings for 650FSB?! my board do only ~625FSB with 10 different cpus
Thanks
I'm using the latest bios from DFI 8/12..
Here my setting for 650x7..
CPU skew 800-200-0
Vcore +475
DRAM 2.35v
SB PLL : 1.75v
NB : 1.67v
VTT : 1.42v
GTL : 61x.61x.58x
VSB Ref : 2B/2A..other option cannot boot..
In Subtimiming DRAM :
Normal
Normal
T2 Dispatch : disable
CH1/CH2 RCom by menu 3-3-1 or 0-0-1..
I'm boot from fsb 615 and used set fsb to reach 650..
Try this seting and post your result..I hope u can reach 650 or more..
best regards..
Last edited by roedzzz; 09-07-2008 at 06:14 AM.
Thanks mate but still do not work for me.
What is your ambient temperature, and what ram you use ?
My room without AC..temperatur of the room above 32-35'C..
I'm used GSkill F2-9600CL5D-4GBPI and Adata X 800+ 2GB..
And my mobo is A3 revision..
Try CPU skew 800-100-0 and clockgen voltage control 3.75v..
My E86 not a good ones so its need highs VCore..
So looking the right seting with your mobo n RAM bro..
My problem is memory
Ahhh!
Can you send me SPD of your GSkill F2-9600CL5D, please?
Here the BIOS pict of mine..
Its for the first seting i'm used for boot at 615 x7..
Last edited by roedzzz; 09-07-2008 at 08:11 AM.
[QUOTE=roedzzz;3271808]Here the BIOS pict of mine..
Its for the first seting i'm used for boot at 615 x7..
Great, thanks!
Can you send me SPD files of your GSkill F2-9600CL5D, please? I want flash my memory! I will send you my mail to pm.
Thanks one more time.
Last edited by Spacemaster; 09-07-2008 at 08:42 AM.
With new configuration of BIOS 8/12 seting i can boot on 625 x 7 from bios..
N still on air..
Very nice manWith new configuration of BIOS 8/12 seting i can boot on 625 x 7 from bios..
N still on air..
Will fire up my Vapochill soon and try yr settings .
Boot from 626 x 7 still with my dirty TRUX..
Validasi : http://valid.x86-secret.com/show_oc.php?id=414852
Yr settings helped my case, thanks man
657fsb
http://valid.x86-secret.com/show_oc.php?id=414885
6x600
Reply With Quote
Bookmarks