Quote Originally Posted by vince2g View Post
According to RealTemp my min VID is 1.1500v and the max is 1.2250. I also found out that the temp sensor in core 1 is stuck. I always wondered why, when idle, it reports a temp 10degrees higher than core 0. Also for trying out 1600, Bluspikez suggested i use +0.15, but thats going into the red area in BIOS. I take it its ok to go into the red?
Yeah, its fine. MSI just is trying to remind you that if you don't have sufficient cooling, you might start to push it on the chip. Just remember that as long as you stay below 1.45v for a 45nm chip and 1.65v (iirc?) for a 65nm chip you will be fine as long as you have decent cooling.