I have lost 6 as of right now....some were high voltage,some stock,some extreeme cold,some not....but all were on my chaintech motherboard(except one that died from a known problem..power suppy blowing up)...and all die from the onchip mem controller dieing...

the chaintech i was trying to figure out why it is killing them.the cpu and mem mod was off and stock voltage the last 2 that died.

powersuppy on the last couple was running 3.33v 5.25v 12.24v so i know it wasnt that.and if the chips are going out because of a high 3.3 line then someone needs to fix something..because if i am not wrong...the spec motherboard and powersupply makers go by is 3.3v 5.0v 12.0v and thay all are allowed a 10% margin of differance...and that would =3.63v on the high side.

then i relized the chaintech ..i had modded the chipset...the nf3 chipset was modded and set to 2.2v...this has to have a direct relation to the chips dieing...
but i am not going to try my idea and remove the mod and then try another chip...not right now at least.
i am whating on another 3400 to play on and thats it for a while...