Noobie needs some help here,
I have a E8200 running, and i have been trying to overclock it to 3.2GHz. I followed all the basic instructions on what to enable and disable. FSB is set to 1600 and RAM to 800. I set the Vcore to +0.11250 and the vNB to 1.3. Everything else is set to AUTO. I have been tweeking these voltages around a bit, and it was with these that i got the furthest. I have Vista 64 bit running, it started up, but like 2 mins later it jsut froze. Also on a different note, is it normal that the sphere gets really hot? I have speed fan running to slow down the cpu fan so it makes less noise (cpu heat is not the problem though, as its always under 35 degrees), but speed fan shows that on one of the temperature readings, the temp goes up to as high as 58 degrees. Is this high or ok?
Any help is welcome

Additional System info:
Vista Home Premium 64 bit
E8200 cpu
Air cooled by Xigmatek HDT-SD964
2x2GB DDR2 OCZ reaper 8500
NVIDIA 9800GTX