Pure :banana::banana::banana::banana: Aka bitspower! (pics)

[Bojamijams]

Yes 750i only needs one. By the IO panel.

[D-Cyph3r]

Very nice looking, would love some X38/48 compatible blocks (I wouldn't use an nVidia mobo again if it was bought for me).

[BP-Vincent]

In our design schedule...We ignored that one far away from I/O...Will check with our engineer and add that to our MOS Block List...

[metachronos]

Holy crap. Those look amazing :drool:

[skinnee]

The mosfet apparently mount differently than my EK's, but similar to MIPS... They'll be fine...

No. they mount the same. screws go through the underside of the board up to the mosfet block...exactly the same.

[Pellepel]

Looks awsome vincent! I want to see black sparkle compression fittings on those...

[BP-Vincent]

Looks awsome vincent! I want to see black sparkle compression fittings on those...

Give us some time to take that...but I need to know what's your tasteand then we can do that...

[BP-Vincent]

Sorry, your correct, i looked at the pictures again of the 790i mosfet my friend ..

I still don't see a problem with being prone to twisting, my EKs are fine...

We check first and finish this design tomorrow

Hope this can match our schedule..

[junkun13]

where to get that SB block?

[IanY]

You guys are going to get me into some serious trouble!!

My wife accidently moved the mouse on my machine at home and saw the liquid cooling forum page.

The first thread says "Pure Pr0n aka Bitspower (pics)" She thought that the forum is frequented by some sexpot named BitsPower.

She looked through every post in this thread and then called me

{This is true.. not Friday humor, although its pretty darn funny}

[orclev]

Now that's hilarious. Good thing she didn't see all that WB pr0n evil posts over in his thread, or the 4 nipple CPU block discussion from the other day, then you'd be in real trouble

[Big_Daddy]

You guys are going to get me into some serious trouble!!

My wife accidently moved the mouse on my machine at home and saw the liquid cooling forum page.

The first thread says "Pure Pr0n aka Bitspower (pics)" She thought that the forum is frequented by some sexpot named BitsPower.

She looked through every post in this thread and then called me

{This is true.. not Friday humor, although its pretty darn funny}

I stopped letting my wife touch my computer. EVERY time she does, something breaks. Hell, last time, she just came into the room, and the psu shorted out.

[drbhatti]

that stuff looks great! if they could make some for intel chipset that looked like these then id be interested!

[ShArKo]

that is so awsome...........my god..........so nice.......how much??? =P

[mpower1001]

What are the odds the blocks fit the 790i FTW from evga?!

All i know is that the 790i ultra and the FTW have the same hole distance on the sb and nb.

[NaeKuh]

You guys are going to get me into some serious trouble!!

My wife accidently moved the mouse on my machine at home and saw the liquid cooling forum page.

The first thread says "Pure Pr0n aka Bitspower (pics)" She thought that the forum is frequented by some sexpot named BitsPower.

She looked through every post in this thread and then called me

{This is true.. not Friday humor, although its pretty darn funny}

Oh crap I need to run and hide then.

@vincent.

Is there anyway you could combine the 2 mosfet blocks into 1 like that northbridge/southbridge? I was thinkn vincent, if you make the blocks higher, and went over the phase modules resistors, you could get a decient water channel. Also the inlet could be on 1 mosfet block, and travel to the second mosfet block.

Or vincent, if thats too difficult, can you make a U fitting that would connect the two blocks via hardpipe?


Vincent another wish i had was a U where the bottom was variable. Like the aquatunning sli bridges in a sense. Only the 2 end parts were 90' with the middle variable/sliding.
This is another fitting i dream about.

[gxavier]

Now those are gorgeous looking, but we need some for X38/48 boards... Asus Rampage Formula kthx!

[Sadasius]

I would really love a block that would cover the NB/SB and Crosslinx chip on my Asus Maximus Extreme. I know I am asking much but I would still like one.

[skinnee]

I still don't see a problem with being prone to twisting, my EKs are fine...

Yeah, I don't see a problem with twisting. I always experience a bit of bowing when using mosfet blocks and no backplate. Bowing gives you greater contact on the extents where the screws are but less contact in the middle.

Luckily mosfest backplates are super easy to make yourself with some thin alu, a dremel and a drill.

You guys are going to get me into some serious trouble!!

My wife accidently moved the mouse on my machine at home and saw the liquid cooling forum page.

The first thread says "Pure Pr0n aka Bitspower (pics)" She thought that the forum is frequented by some sexpot named BitsPower.

She looked through every post in this thread and then called me

{This is true.. not Friday humor, although its pretty darn funny}

HA! And you're wife still doesn't know about our pillow talk session last night.

[skinnee]

@Skinee...

I've seriously thought of fabbing up some mosfet backplates got the 780i...

Its very easy, and I wouldn't add Mosfet blocks to any board without them! Let me know if you need measurements or anything, be glad to help you out.

[melanko]

Wow.

Those are excellent looking.

I'm hard.

[bigslappy]

Now those are gorgeous looking, but we need some for X38/48 boards... Asus Rampage Formula kthx!

PLZ PLZ Rampage Formula blocks PLZ I'll mow yer lawn every weekend !

[BP-Vincent]

Oh crap I need to run and hide then.

@vincent.

Is there anyway you could combine the 2 mosfet blocks into 1 like that northbridge/southbridge? I was thinkn vincent, if you make the blocks higher, and went over the phase modules resistors, you could get a decient water channel. Also the inlet could be on 1 mosfet block, and travel to the second mosfet block.

Or vincent, if thats too difficult, can you make a U fitting that would connect the two blocks via hardpipe?


Vincent another wish i had was a U where the bottom was variable. Like the aquatunning sli bridges in a sense. Only the 2 end parts were 90' with the middle variable/sliding.
This is another fitting i dream about.

We have checked that for this fitting issues..Will come out a module fittings for application issue...Will let you know fitting can paly like this..

Now those are gorgeous looking, but we need some for X38/48 boards... Asus Rampage Formula kthx!

There are a lot of inquiry on different M/B and CHIP SET...

We will work step by step...thanks for the suggestion.

I would really love a block that would cover the NB/SB and Crosslinx chip on my Asus Maximus Extreme. I know I am asking much but I would still like one.

PLZ PLZ Rampage Formula blocks PLZ I'll mow yer lawn every weekend !

I have checked our design schedule when we can add this in..

[CyberDruid]

They look stunning. Bitspower is catching my attention.

[headala]

any internal pics of this?