Your stressing your NB you need more voltage on it I bet.
Your stressing your NB you need more voltage on it I bet.
_____________________________________________
Rig = GA-P67A-UD3P Rev 1.0 - 2600K @ 5.2~GHz 1.5v~, 1.489~v Under Load - Swiftech Water Cooling - 2 X 4GB Corsair DDR3 2000Mhz @ 1868MHz~ 9,10,9,27 @ 1.65v~ - Asus 6970 @ 950MHz / 1450MHz - 3x Western Digital RE3 320Gb 16Mb Cache SataII Drives in Raid0 - Corsair HX 850w Power Supply - Antec 1200 Case - 3DMark 11 Score = P6234 - 3DVantage Score = P26237
I had 1.6v to it at one point it didn't seem to makeit any more stable. Once I find my lowest voltage settings at 3200 mhz I will try slowing upping the FSB and making adjustments accordingly. The one problem with burn test failures is that you do not know which core is failing, however prime isn't anny better since I could not get prime to fail in 12 hours...Originally Posted by truehighroller
Enermax Liberty 620 Modular
Liquid Stacker
8GB G.Skill PC2 8800 5-5-5-15 @ 400MHZ (PC6400 Speed)
DFI LP LT X48-T2R
Liquid Cooling:
Thermochill PA 120.3 W/ Panaflo L1BXs/L1As
D5 andFuzion V2, DD MCP Universal
8800GTS G92
Intel Q9450 @3200MHZ @ 1.18v (Wont OC any higher despite voltage increases)
Reply With Quote
Bookmarks