Feser DDC Pump Top Pictures

[bentleya]

More info guys

Price, 19.90 (euros)
Fittings, 2 x feser compression fitting (1/2" version)
Oring, 1 x feser O ring (blue if you get blue leds, green if you get green leds, red if you get red leds and orange if you get orange leds)
LED's, 1 x feser module with 2 LED's (blue if you get blue Oring, green if you get green Oring, red if you get red Oring and orange if you get orange Oring)

NO LED's Pictures, (will also put in OP) (repeat not my photos but uploaded to my pb)










right heres some more pictues with leds again not my pictures but my photobucket thanks bundymania for these

[bentleya]

This top is quite ugly for sure...
But, I don't really think TFC will produce such a top without some perf'.
In one of my rig, i've got X-changer 360+tube+FeserONe and i'm very happy with that. It just needs a better design... I'm waiting for test results.

BTW look at the XSPC's top: quality is really really bad, plastic suxXx... But it's not a problem just because it roxXxes.

few people have had nosie issue with xspc top so there not perfect but best at the moment tests will revel which is best

Mmm make a solid one out of acrylic or the black stuff...
Looks better IMHO.
Molded means it is cheaper to make than a solid one.
Less material and a no milling machines...

Give one to martin for a test
Then we can say something about performance!

the black stuff is delrin / actel BTW and i'm sure there will be glad to give one to martin to test, just not sure he will test it tho with his retument

[vkbms]

Against all.....I like it.....

I'll hope to test one in the next weeks....

[Yozzman]

few people have had nosie issue with xspc top so there not perfect but best at the moment tests will revel which is best



the black stuff is delrin / actel BTW and i'm sure there will be glad to give one to martin to test, just not sure he will test it tho with his retument

I know that's delrin :P

Yeah, 2bad... But he will finish his CPU roundup tho!

Price is on par with other tops...

[Sparky]

So wait, maybe I missed it, but why is the outlet on this protrusion on the top that hangs over the side of the pump?

[orclev]

So wait, maybe I missed it, but why is the outlet on this protrusion on the top that hangs over the side of the pump?

Was wondering that myself. Maybe it's purely visual? Perhaps it helps to ensure the top is properly centered and mounted on the pump?

[Eddie3dfx]

Looks like a jello shot
I kind of like it, but personally I like the petra black or xspc top better.
Wonder how it performs though

[RCG_Bex]

Looks crap but I lose those 5.25" mounts.... *prepares to defend self*

~Bex

[bentleya]

Against all.....I like it.....

I'll hope to test one in the next weeks....

NOT AGIANT ALL me likes and i hope to, to be testing one very soon

I know that's delrin :P

Yeah, 2bad... But he will finish his CPU roundup tho!

Price is on par with other tops...

lol, ok where you say black stuff then , he still needs to see if can get a XSPC Edge V2 and test it against the V1

So wait, maybe I missed it, but why is the outlet on this protrusion on the top that hangs over the side of the pump?

I wound guess that it is something to do with barb getting in the way of inside so if the move it out, better performance maybe

Was wondering that myself. Maybe it's purely visual? Perhaps it helps to ensure the top is properly centered and mounted on the pump?

^^^^^^^

Looks like a jello shot
I kind of like it, but personally I like the petra black or xspc top better.
Wonder how it performs though

Like i have said loads of times in my mad quote sessions above wait to tests to revel which is the best, maybe not best look wise but performance wise maybe will see

Looks like it's some sort of injected molded plastic or something doesn't it? Much better pics now. At least you can get a sense of the design. Be interesting to see how it does.

andyc

yer the first lot an't very nice, but still need a picture of the inside

Looks crap but I lose those 5.25" mounts.... *prepares to defend self*

~Bex

elllo BEX lose them 5.25" mounts

[IanY]

You don't happen to work for Bentley, Audi or VW do you ? Nevertheless, its good taste lol

[bentleya]

no bentley is my 2nd name

[IanY]

no bentley is my 2nd name

All the better! What pedigree lol

[Eddie3dfx]

no bentley is my 2nd name

If it makes you feel any better, when I was 17, we took my friend's dads bentley over a huge bump and scraped the front end in the ground.
Yeah, needless to say I'm sure he got a lashing for that
Car was amazing though

[menace2society]

" a face only a mutha could luv"

[ls206]

How strong is the top? It looks like it could crack easily..

[NaeKuh]

Woha - I don't think I've ever seen so much hate a few dark pictures =/

Cuz its too bright, and looks like the stop light at an intersection.





Fesser make a dual top with dual inlets please like this:


Dual Inlet FTW!

[bentleya]

All the better! What pedigree lol

not sure what you mean you asking for my first name?

If it makes you feel any better, when I was 17, we took my friend's dads bentley over a huge bump and scraped the front end in the ground.
Yeah, needless to say I'm sure he got a lashing for that
Car was amazing though

what how cound you

The name Feser picked for this product, says it all to me, "Reflector"...

Apparently all those crisscrossing braces are to increase reflection..??

IMO, all they increase is a more ugly product.

Not that it matters, but I personally don't care how it performs, they won't get my hard earned $$$...

then why keep posting in here then

" a face only a mutha could luv"

what? just wait to i get some really nice photos

How strong is the top? It looks like it could crack easily..

not sure, haven't got one yet but will do as soon as there avible to buy

Cuz its too bright, and looks like the stop light at an intersection.





Fesser make a dual top with dual inlets please like this:

Dual Inlet FTW!

feser have got some grest new products for 2009 maybe one of them is that? who nos? no me any way

+1... Dual Inlet Top ........ FTW

more of the spamness lol

[IanY]

All I meant was that its great to have a prestigious name like Bentley.

[bentleya]

yeppers wound reither be called speedy with no sir name or aero or something really cool

[NaeKuh]

yeppers wound reither be called speedy with no sir name or aero or something really cool :P

rofl...

i reminds me of a scene i read on a japanese manga book from bleach.

He was naming his animated stuff animal, and it wanted the name SKY. Ichigo (protagonist) said no, that name is too cool and named it KON instead.

[101]

All the ridges are to provide mechanical strength. Each side of the mold has deep cavities to create the part thickness. Remember in injection molding uniform wall thickness is king. Then it looks like they glue a couple covers on the top for some reason, probably to keep it from looking like an egg crate and to add branding. The overhang on the outlet is merely to provide enough structure to support the G1/4 tap.

Production costs for something like this should be very low (way less than $5) unless it was extremely low volume. The problems with it I see are depending on the resin, people will crack it screwing in barbs, and it will be difficult to get a uniform flat surface for the o-ring seal due to all the walls. You could probably solve those problems by using polycarbonate and a slightly larger o-ring than stock. It should be much cheaper than anything else available tho.

[bentleya]

I am sorry to keep spamming the spamming going, but damn that spam musubi looks GOOD!

spam all you want dosent bother me in my threads me no care

All the ridges are to provide mechanical strength. Each side of the mold has deep cavities to create the part thickness. Remember in injection molding uniform wall thickness is king. Then it looks like they glue a couple covers on the top for some reason, probably to keep it from looking like an egg crate and to add branding. The overhang on the outlet is merely to provide enough structure to support the G1/4 tap.

Production costs for something like this should be very low (way less than $5) unless it was extremely low volume. The problems with it I see are depending on the resin, people will crack it screwing in barbs, and it will be difficult to get a uniform flat surface for the o-ring seal due to all the walls. You could probably solve those problems by using polycarbonate and a slightly larger o-ring than stock. It should be much cheaper than anything else available tho.

this man does his stuff I'm sure there are doing the right testing so all them problems don't happen

[MasterOfTheReal]

I guess these pictures are better

Its grown arms, Grinchville shall soon be under attack from the army of feser DDC tops! Ready your defenses!

[bentleya]

^^^^ haha think it looks like a darlik,

EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE, EXTERMINATE

^^^^

for anyone, who dosn't know about DR Who and Darliks heres a you tube vid

http://www.youtube.com/watch?v=c4UJiBmVEMk

[Arni]

One thing don't fit on bundy pic