Core2 Duo E7300 first touch!

[LagunaX]

Coolaler needed 1.456v for dual orthos stability @ 4.265ghz:

[ZoLKoRn]

Thanks all

wow those are great temps, 4.5ghz @ 1.6v @ 40c , albiet the voltage is a bit high but still great temps. how ever its a huge jump ion voltage for just a 200mhz increase

hmm you mean 200MHz increase to 4.4GHz right ? from i tried it can boot about 1.57-1.6V but not stable

Coolaler needed 1.456v for dual orthos stability @ 4.265ghz:

Yah i seen and i think mine chip maybe can Prime at about that Vcore too

[chinaguy]

Any news when the E7300 will be on sale in the shops! I want one NOW!!!!!! Intel said its due for release Q3, so when is that August?

[psychopath]

HI
4.2GHz, 1.392V is Orthos stable?
haw mutch VID on E7300?

You see VID on CoreTemp


My E7300 is coming.. tomorow i have my E7300

[roadie]

I think you may be slightly disappointed if you expect to achieve what the OP's Engineering Sample chip did...

[psychopath]

my E7300 suks

3800mhz @ 1.47v orthos stabel

[ataruz]

Push it bro

[philbrown23]

hey ZOLKORN can I add this to me E7300 results thread? this would be great.

EDIT: here: http://www.xtremesystems.org/Forums/...ighlight=E7300

[chuck4456]

I like the E7300.
Does well on an antique.
Should be remarkable on later model motherboards.
Can't beat the price either.

[MidgetMariachi]

Nice work!

Midget Mariachi

[x3m_gogo]

my e7300 :
[IMG=http://img142.imageshack.us/img142/8263/spiqe9.th.jpg][/IMG]

air cooled by: ac freezer 7 pro

[ziddey]

lol 1.68v. christ

welcome to xs btw

just got an e7300 myself to replace my old e6400 (figure it's about an even trade once I sell that off along with the bundle motherboard). but alas, my e6400 did much better. 8x450=3600 @ 1.5v. within vcore limits. this e7300.... 8.5x400=3400 @ 1.34v. 9x400=3600 @ 1.36v (vcore limit) is unstable. 10x400=4000 with 1.45v won't post.

my board doesn't have gtl adjustments, and lowest vtt will go is 1.2v (p965)

damn!

3 years later, and a downgrade. :laugh:

[GeorgeStorm]

Hi,
My e7300 is in my sig, I am rather disappointed,
its stable at 3.6 at 1.32, however, i think it needs around 1.5v for 4GHz stability (a little too high for 24/7 use i think)
Although I am going to try mucking about and seeing if I can get it at 1.464 (next step down, yes massive gap between voltage adjustments)
Im hoping to go xtreme and try dice later this year, see how far I can get it, (it took 1.712v for the validation in my sig) but i should be able to get higher on the same volts with sub zero.....
By the way, are less volts needed for a high multi/low fsb, or the other way round, or does it make no difference?
This is to vcore, rather than nb volts, or fsb volts........

Thanks

[Kane]

Here's mine.

Asus P5KR
Intel E7300 Cooled by QX9650 Stock Cooler
2x1GB Geil
ATI X300

Prime95 stable @ 4GHz, and here is the max Super PI 1M

[railmeat]

Thx for sharing
4.2 Ghz <1.4V is nice for 24/7

thats not 24\7 stable.....prime 1 hour small fft screenie plz,occt,etc please...super pi is stable for the time it runs only (in seconds)not hours,not proving stable to me.prime,orthos screenies plz.

[Riska]

They rock those cpus

http://valid.canardpc.com/show_oc.php?id=430269

And it could go higher but had not seen that mem was on 612mhz thats wy no higher

[AnaMan]

Intel E8190 what de....??....
nice chip zol.....

[Mean Machine]

C'mon Zolkorn, get some LN2 and a mall to go with it.

[sandy]

here's mine with stock cooling



e7300 @ max on stock
http://valid.x86-secret.com/show_oc.php?id=445014

[GeorgeStorm]

Sandy, I cant get the link to work, it just takes me to the imageshack homepage......
What speed did you get to, at what volts?