1600+ Thoroughbred

[sysfailur]

I'm talking w/ a guy right now about getting a 1600+ Tbred off of him for $75. He said aircooled right now it's running 1733mhz @ 1.75v. Buying it to see how much of a percentage-wise overclock I can juice out of it Probably sell it afterwards :P When/If I get it I'll post pics and whatnot.

[JBELL]

write up a bench against XP and any intel you have.... im very curious

[sysfailur]

Originally posted by JBELL
write up a bench against XP and any intel you have.... im very curious

Will do!

[sysfailur]

YUMMAY.

[stoopid]

coolness

[sysfailur]

Coolness is correct. Look at this temp.

[Sayajin]

the temp is ok...is the load or just idle? if it is idle it isnt anything special...
it must be load correct? if so well done! ehhehhe

[sysfailur]

Originally posted by Sayajin
the temp is ok...is the load or just idle? if it is idle it isnt anything special...
it must be load correct? if so well done! ehhehhe

It's idle, with an ax-7 and sunon 80mm 39cfm fan.

I consider it pretty impressive considering what my freaking 2200+ runs at.. 8000000C or so.

[N8]

Nice, sys! Was wondering when we'd see the lower-clocked tbreds

BTW, where'd ya get it?

[sysfailur]

Originally posted by [N8]
Nice, sys! Was wondering when we'd see the lower-clocked tbreds

BTW, where'd ya get it?

I am not sure of it's ture origin... but I got it off of a guy on hardforum. I think he got it off of someone who got it on the Japanese market. I could be wrong though.

[sysfailur]

btw, this processor needed no modifications. It was stock unlocked and the L3 look totally different than the 2200+. So, thanks AMD!

[N8]

Very nice, thx for the info

[N8]

now, the real question is....do them things clock like these AGOIA/AROIA's ?

[sysfailur]

Originally posted by [N8]
now, the real question is....do them things clock like these AGOIA/AROIA's ?

I'm gonna put my pelt on it soon enough. I'll be sure to post the results.

[sysfailur]

Ok this Tbred is quite strange. I feel it's going to own once I put some better cooling on.

The status is this... I can load it down with voltage (1.95v) or I can put it low (1.75v) but I still only get to around 1.83-1.85ghz stable. Now I've gotten into windows @ 1875 but it wasn't that stable.

What I'm running at right now, under full load for about 15minutes is:

[N8]

This little AROIA Palomino of mine will run 3D @ 1900 np's on air(AX-7 w/ Vantec Tornado) but it does take 2.1v w/ the G4 in, 2.0v w/ a G2. Load temps in the high 50's......

[sysfailur]

Alright, update time!

I don't have a 2nd psu available to me so I couldn't run my 226w peltier on the tbred, but, I do have a maze3 which I put on it along w/ some very chilly water.

Imma get straight to the point and just show you 2 screen shots. The first one is my stable 100% workable speed of 2003mhz. Note the temp and the voltage. Pretty decent. I am hoping to get 2200 out of this chip w/ my pelt. I ran 3d at this speed and now I'm the #4 AMD + 4200.



And then we have a digicam picture of my highest unstable speed. :P

[N8]

Very nice sys

You passed my old 3D score

I do actually have a score higher than that, but I've left it unpublished as I'm still deciding whether I care to bench or not w/ these 40.41's..........

Excellent chip you have there! Can't wait till ya get ur pelt on

[sysfailur]

Originally posted by [N8]
Very nice sys

You passed my old 3D score

I do actually have a score higher than that, but I've left it unpublished as I'm still deciding whether I care to bench or not w/ these 40.41's..........

Excellent chip you have there! Can't wait till ya get ur pelt on

I also am noticing that my +5 is running low as right now I'm using my weak 300w enermax. I have to take my 550w enermax out of my case and then I can run the pelt. The +5 on that is usually around 5.10 so that may help get it stable as well. I should be able to do this tonight as well--I'm not home right now, but will be in an hour or so. Then I'll get to it.

[sysfailur]

Woops I just noticed that actually I am #4... I only had the cpu to 2100mhz and lower but someone benched @ 2123. So yeah, #4. But not by the end of tonight! #3, #2 maybe here I come :P