My SB750, HD4850 x-fire, 9850, H20 Build...

[Phenomenalspeed]

hi sir,

can i check with you what is the load temp of your pwm? I'm curious to know how well is the copper heatpipe doing.

thanks in advance.

How can you check the temperature of the pulse width modulation??

Thanks.

[informal]

I think he meant "power mosfets" under "pwm"..

[Rammsteiner]

!

Im getting pissed.

Still no sigh of availability of the DFI Lanaprty DK 790FXB-M2RS...

Stupid shop I ordered my Sapphire HD 4870X2 from sucks arse and it only updated it's webshop today that they 'expect' it to have in 2~3 days... Funny part, but at the same time worrying, is that the price went from 413 Euro (which I pre-ordered it for) up to 474 Euro...

So I saved a lot of money there, on the other hand they can 'pretend' they dont have the card yet and let me wait untill I cancel the order... But Ill see, I hope to see it being here wednesday, otherwise Im going nuts big time.

[nanohead]

How can you check the temperature of the pulse width modulation??

Thanks.

Only a couple of ways. If the mobo instruments for it (with a thermistor connected to something like an ITE 8712 monitor chip), or you can put a thermal sensor on it somewhere (like one of the chokes or on a common heatsink)

[RiverRicer]

413 Euro????? Holy schnikies, you guys don't get a break over the big pond, do you?

[charged3800z24]

I will the the second 4850 in tonight. I will try and get some vantage and 3dmark06 results in...I thought about buying a 9950BE.. I will have my 9850BE for sale...

[charged3800z24]

well I was able to convince my PSU to run the 2 HD4850's...Compare link is in my sig.





I had a high of 3.5ghz using AOD...So far this rig has been pretty fun...

[kull]

Hi,

There's something strange with that 3DMark CPU score, it is a bit low for a 3.5 GHz Phenom. You got a 400MHz more than me and only 200 points advantage.

My 9950@3.1GHz with 4850CF (15.5X200MHz on a M3A32-MVP, 4GB DDR2-800 Geil)



The system was too hot with those 4850s so now I'm on 280 GTX. (and all temps dropped for a 10-15 C, and Crysis works faster too)

[charged3800z24]

Hi,

There's something strange with that 3DMark CPU score, it is a bit low for a 3.5 GHz Phenom. You got a 400MHz more than me and only 200 points advantage.

Sorry.. i should have been more clear,.. that 3dmark06 run was 3.3ghz. I can't run 3dmark06 at 3.5...my PSU is dropping volts and is going to die soon... on the 3.3ghz run it was starting to smell.. and I lost a 6.4v 1400 CAP. I replaced it, but the PSU is still not running full strength any more...

[HondaGuy]

Nice set up Charged... Here is my setup H20

[charged3800z24]

Nice set up Charged... Here is my setup H20

NICLE!!! I should get a bigger rad/...which water block you have there?

[HondaGuy]

D-TEK Customs Fuzion V2 CPU Water Block 1/2IN Barbs

[charged3800z24]

D-TEK Customs Fuzion V2 CPU Water Block 1/2IN Barbs

Did you post temps yet? Hows that water block doing...I really like the apogee

[HondaGuy]

Temps here...I like this W/B it works good along with the Tri/Rad, its cools the CPU well.. I read that the apogee is more for dual cores?

[charged3800z24]

Temps here...I like this W/B it works good along with the Tri/Rad, its cools the CPU well.. I read that the apogee is more for dual cores?

well under 3.2ghz with 1.45v it idles very cool. I do have eveything external.. so might be helping.

[demonkevy666]

well under 3.2ghz with 1.45v it idles very cool. I do have eveything external.. so might be helping.

27C is low as I've been everyonce in a while it hit 26C for a few seconds

it's like 50F here in my room though lol

[charged3800z24]

27C is low as I've been everyonce in a while it hit 26C for a few seconds

it's like 50F here in my room though lol

it's 68*F - 72*F always here in my living room where this PC resides..