ASUS Striker II Extreme

**sargatanas** · 08-13-2008, 09:54 AM

Guess importing em isn't that cheap.
Well we can change places for a few shopping days

U get some CSX and I get more MM towers

**slim142** · 08-13-2008, 10:11 AM

Haha, sometimes I ask myself, how come such great stuff are not available in US, oh well!
When are you getting your memory?

**sargatanas** · 08-13-2008, 10:29 AM

Well there is alot of stuff u won't get at germany too like watercooling parts ^^
Could get the dominators tomorrow, depends how much time I have to get to the local store. The CSX could arrive on friday or monday.

**M@G!C** · 08-13-2008, 11:27 AM

Right now i´m running my QX9650 at 450FSB with a multi of x8.5 giving 3825Mhz. I tried to run a multi of x9 to give 4050Mhz and gave a bump on the vcore but i allways have errors in Prime 95 and allways the same core (core 4) just after a few seconds. Any advices what i can do more?

**slim142** · 08-13-2008, 11:28 AM

When you get your Diablos, make sure to post some pictures, I love those memory sticks

**slim142** · 08-13-2008, 11:31 AM

Originally Posted by M@G!C

Right now i´m running my QX9650 at 450FSB with a multi of x8.5 giving 3825Mhz. I tried to run a multi of x9 to give 4050Mhz and gave a bump on the vcore but i allways haver errors in Prime 95 and allways the same core (core 4) just after a few seconds. Any advices what i can do more?

Are 200Mhz going to make a difference?

**M@G!C** · 08-13-2008, 11:33 AM

Originally Posted by slim142

Are 200Mhz going to make a difference?

I guess not.... it´s just for the picture...

**slim142** · 08-13-2008, 11:36 AM

Originally Posted by M@G!C

I guess not.... it´s just for the picture...

4Gbs of RAM @ 1800Mhz 8-8-8 + Quad Core @ 450mhz FSB, dont you think your NB is hating you right now?

For 4Ghz, I would try a small bump on the vNB, vCore and maybe VTT.

**M@G!C** · 08-13-2008, 11:40 AM

Originally Posted by slim142

4Gbs of RAM @ 1800Mhz 8-8-8 + Quad Core @ 450mhz FSB, dont you think your NB is hating you right now?

For 4Ghz, I would try a small bump on the vNB, vCore and maybe VTT.

I dont think so ..... Is only running at 50º !!!

I think i can push it a little more....
Will try that...
Anyone knows if PLL voltage is important when overcloking Quads?

**TheRoyalty** · 08-13-2008, 01:05 PM

I had to bump my vcore up a little, plus PLL up to 1.60 (bios). NB is @ 1.58 but all temps are kosher. Stable baby. SB is bumped to 1.60 as well. Temps good, no freeze, prime95 and OCCT are good, happy days.

**Fusion2002** · 08-13-2008, 01:20 PM

im also at 1.6 PLL, that was the trick to get stability for me.

**slim142** · 08-13-2008, 03:57 PM

Long time ago 1.56 PLL was the trick for me

**M@G!C** · 08-14-2008, 05:35 AM

Originally Posted by slim142

4Gbs of RAM @ 1800Mhz 8-8-8 + Quad Core @ 450mhz FSB, dont you think your NB is hating you right now?

For 4Ghz, I would try a small bump on the vNB, vCore and maybe VTT.

Tried that Slim but no sucess....
Also raised PLL to 1.56v but no sucess again. Core 4 allways fails fater 2 or 3 seconds.
I will try play with GTL refs...
Another thing that is driving me crazy, is Nvidia GeForce drivers, wich one should i use to get the most from my 9800GX2?
I currently use 175.19...

**sargatanas** · 08-14-2008, 06:09 AM

currently running the 177.83 on my gx2 quad
175.12 worked the best for me till now

**slim142** · 08-14-2008, 07:16 AM

Originally Posted by M@G!C

Tried that Slim but no sucess....
Also raised PLL to 1.56v but no sucess again. Core 4 allways fails fater 2 or 3 seconds.
I will try play with GTL refs...
Another thing that is driving me crazy, is Nvidia GeForce drivers, wich one should i use to get the most from my 9800GX2?
I currently use 175.19...

177.83 is what Im using. Is WHQL and comes with PhysX drivers. Havent tested performance yet.

**Fusion2002** · 08-14-2008, 07:49 AM

I'm using the latest 177.83 drivers and have gotten the best out of 3dmark06 and vantage with these. I did shut of Physx for 06, and that seemed to help by about 200 points or so. I should also mention that I'm on Vista 64.

**M@G!C** · 08-14-2008, 12:23 PM

I´ve instaled 177.83 but physx is not working...
In the physx control panel it says NVIDIA physx processor not installed...

**slim142** · 08-14-2008, 12:28 PM

Weird... it should be "GeForce PhysX" with the green dot.

**M@G!C** · 08-14-2008, 12:43 PM

Originally Posted by slim142

Weird... it should be "GeForce PhysX" with the green dot.

?? Green dot where?

**TheRoyalty** · 08-14-2008, 01:29 PM

http://www.xtremesystems.org/forums/...180445&page=73

M@G!C: First post on the top, have a nice lil pic for you there so you can see what it should look like. Page before this one has a link to the newest GPU driver as well, top post.

**M@G!C** · 08-14-2008, 01:39 PM

Originally Posted by TheRoyalty

http://www.xtremesystems.org/forums/...180445&page=73

M@G!C: First post on the top, have a nice lil pic for you there so you can see what it should look like. Page before this one has a link to the newest GPU driver as well, top post.

haaa ...ok
Mine look just like that one so it should be enabled, anyway i just runned Physx Fluidmark to benchmark physx and its working!!!

**TheRoyalty** · 08-14-2008, 01:42 PM

Cool, yes that installed part just refers to if you have an independent physx processor like an ageia card. Should be good to go. Flags move in GRID now, woopie?

**slim142** · 08-14-2008, 01:53 PM

Glad everything is working now

**M@G!C** · 08-14-2008, 02:21 PM

I think i might be able to be stable at FSB 462.5 - 1850Mhz that with a multiplier of 8.5 gives 3931Mhz for the CPU

, this only raising the Vcore to 1,36v in BIOS (1,4V real).
But i´m not to confortable to run my $$$$ QX at 1,4V ....

**slim142** · 08-14-2008, 03:26 PM

1.40 is my max on 45nm
I try to keep it 1.39-1.40

Thread: ASUS Striker II Extreme

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions