Kasparz, how easy are heatspreaders to remove?
Kasparz, how easy are heatspreaders to remove?
its really hard to remove the thermal tape wich CSX use on the Diablo, its really stable and the other side has some glue on 3 points if you have single sided module...Originally Posted by BulldogPO
Last edited by Achill3uS; 08-13-2008 at 08:47 AM.
I think mine is better.
Is that the highest you can get it stable on the S2E?im also testing my kits (2*1 GTR) on 790i (S2E) now, and its much more easy to make it stable than on intel P45 or X48, i can use less voltage for stability... that's what i've talked about upper, nforce is nforce
1800 7-6-5-18 1T P1&P2:enabled memtest stable @ 1.94v, 2000 7-6-6-18 1T boot & 1M 2M pass @ 2.24v
screens later... need to tweak them more...
no, 2000 8-7-6 also rock stable around 2.0v, and i could bench @ 2100 8-7-6
btw, yesterday i've get off the hs of the diablos, baah its really needed to warm up till your fingers burn
I think mine is better.
Actually I have no idea how shipment to the US works with customs and all.
But I do know someone who could be able to help, gotta ask him first though
Also I'm not sure pricing is that attractive, given the current euro/dollar relation.
Anyone who's interested in getting these mems (and can't get it any other way) may contact me by PM, I guess...
its nice move from you jcool, but afaik there will be also available CSX soon.
I think mine is better.
Thats great to knowno, 2000 8-7-6 also rock stable around 2.0v, and i could bench @ 2100 8-7-6
btw, yesterday i've get off the hs of the diablos, baah its really needed to warm up till your fingers burn
Btw, is there any small chance anybody could be able to try this in a 8Gb configuration with a Quad-Core on a S2E? That would really stress the NB and I would love to see how the S2E reacts to this.
jcoolActually I have no idea how shipment to the US works with customs and all.
But I do know someone who could be able to help, gotta ask him first though
Also I'm not sure pricing is that attractive, given the current euro/dollar relation.
Anyone who's interested in getting these mems (and can't get it any other way) may contact me by PM, I guess...
I want this memory so bad, but Im looking for GTR kits only. If you can give US people some help, it would be great
Did they announce they coming to US?its nice move from you jcool, but afaik there will be also available CSX soon.
if i will got some 4GB kits for testing i will do it
and no, they didnt announce it, ive just get you know about it, its in the plan to make CSX available in the US also.
I think mine is better.
On Diablo you have to heat them up, on CEC it is very easy to remove.
Will look forward for that 8gb testingif i will got some 4GB kits for testing i will do it
and no, they didnt announce it, ive just get you know about it, its in the plan to make CSX available in the US also.
Btw, if you get any ETA for the CSX in US, please let us know
Current 4GB Diablo Kits carry D9GTS by the way.. just so you know.
At least that's what I got and what the German CSX rep told me.
You probably didn't read previous posts.
Yeah thats what I also heard from them. I can wait for GTR kits though.
So kits on stores are most probably GTR ICs. Kits from CSX website are most probably GTS right?
Im interested on GTR, nothing else.
Why are you interested in GTR? Chips are both the same. GTR is like E8400, GTS is E8500. Both are same, you just get higher IC mfg bin in this case.
So wait, GTS is actually better than GTR? I thought GTR was the (better)highed binned (1.33Ghz on GTR vs 1.06Ghz on GTS)
confused
GTN is 800, GTR 1066, GTS 1333.
http://download.micron.com/pdf/datas...R3%20SDRAM.pdf
Where in that huge document explains the GTN 800, GTR 1066 and GTS 1333? I couldnt find it anywhere...
Im confused since this is what the CSX Rep told me in the email I sent
Oh well, jcool just told me GTS is more expensive so I think Kasparz you are right after all. GTN<GTR<GTSS and R are from the same chip family. The Base speed from Micron on S = 1066MHz. R Base speed is 1.33GHz
First page.
If you need FBGA decoder, there it is
http://www.micron.com/support/part_i.../decoder.aspx#
People felt in mass fault syndrome, information is available, so there is no need to ask anyone in forums. Google search takes few seconds, answer to anyone(me including) takes more than minute to write.
Last edited by Kasparz; 08-13-2008 at 10:42 AM.
Well,
my frakkin' %#@*^&&^$$##!! Striker 2 Extreme has done it again.. byebye my sweet Diablo's...
They ran about a week at stockspeeds & today they crapped out exactly the same way as 2 sets of OCZ Flex 2 DDR2000 & 1 set of Corsair XMS3-2000..
Man I hate this mainboard - it's 680i-mayhem all over again..
I see... so I was wrong all this time thinking D9GTR was better. Well now that everything is clear, I think there is no problem getting GTS now
Thx Kasparz
Are you serious?Well,
my frakkin' %#@*^&&^$$##!! Striker 2 Extreme has done it again.. byebye my sweet Diablo's...
They ran about a week at stockspeeds & today they crapped out exactly the same way as 2 sets of OCZ Flex 2 DDR2000 & 1 set of Corsair XMS3-2000..
Man I hate this mainboard - it's 680i-mayhem all over again..
What voltage did you have your Diablos?
How do you know is the Board killing your memory?Well,
my frakkin' %#@*^&&^$$##!! Striker 2 Extreme has done it again.. byebye my sweet Diablo's...
They ran about a week at stockspeeds & today they crapped out exactly the same way as 2 sets of OCZ Flex 2 DDR2000 & 1 set of Corsair XMS3-2000..
Man I hate this mainboard - it's 680i-mayhem all over again..
Wich voltage where you running the sticks?
CPU - QX9650 450FSBX8.5@3825 Mhz
MOBO - Asus Striker II Extreme BIOS 901
MEMORY - 4GB DDR3 CSX DIABLO 8-8-8-19 2T 1.86V
GPU - Sapphire HD6950 2GB Dirt 3 *UNLOCKED*
SOUND - X-FI Extreme gamer
HDD - 2 x 150GB Raptorīs RAID0 + WD Black 2TB WD2002FAEX[/I]
CASE - Coolermaster Cosmos S
PSU - Enermax GALAXY DXX 850W
OS- Windows 7 64Bit
Board is first what can kill memory, second is heat, third is voltage. Of course if voltage is within warranty limit.
Posting Permissions
Reply With Quote
Bookmarks