Jimmyz told me to post this LOL... he'll post the info up tonight
K
50ohm VR from pin #9 to ground should do it (edit: should maybe add, on the VT1165MF IC and one on each since there's one for each gpu)
Just need a more convenient solderingpoint so if someone with cards laying around would check for that, preferably on the backside of the card.
Last edited by elmor; 08-12-2008 at 04:17 AM.
2008 - AOCC WW #2 | MOA EU #8 | GOOC WW #1
2009 - GOOC WW #3 | MOA EU #3 | MOA WW #1 | GB TweaKing #6 | ASUS ROG OCS #2
2010 - MOA EU #1 | GOOC EU #13 | MOA WW #1
2011 - MOA EU #4 | MOA WW #?
lol at the people who are saying "4870x2 is too much power",
Then you guys say lets voltmod them :P
CPU:Q6600 G0 @ 3.825
Motherboard:Asus P5E X38
Memory:2x2GB OCZ Reapers DDR2 1066
Graphics Card:Asus 4850
Hard Drive:2xSegate 500gb 32MB Cache raid0
Power Supply:Xion 800W
Case:3DAurora
CPU cooling: D-tek Fuzion V2 (Quad insert removed)
GPU cooling: mcw60
Monitor:24" LG
Great going guys Im waiting for the arrival of my card and this tread will be very helpfull. Anyone has found the v.core read out and v.mem read out points ?
Ill post up the mod guide for all tommorow when I get my card mICKEYmOUSE did for me or at least show where the VR's connect and read points if you guys want.
Clint
Win7 64 Ultimate
i7 930 - 4200mhz 24/7 - Dtek v2
ASUS P6X58D-E
2 x MSI 6970's xfire
3 x 2gb G-Skill 2000mhz
Samsung 27" LCD
SilverStone ZM1200w psu
2 x 300gb WD Velociraptors Raid 0, 4TB storage
PS3-used mostly for bluray and media server
Nobody has found the volt mod for this card yet ?
Sorry for OT but are the mounting holes in the same places as previous ati's? I.e. would my pots that fit my 38xx's fit a 4870?
no they are 42 mm acording to what I have been told
They are 43x43 afaik
Any progress on this guys ?
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Mod point is on the backside...
Someone post pics of the backsides of both VT1165MFs.
You were not supposed to see this.
Current hwbot record x2 is clocked to 900 , can a stock card on water clock this high or is it vmodded ?
Last edited by aussie-revhead; 08-24-2008 at 06:36 AM.
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
idk wondered that myself,mine can hit close to 870 /1000 with idle temps @30c....so i'm not sure
_________________
Is yours on water ? Air ? Vmodded ?
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
no just stock fan 100%and central air con.its one run then done mostly,till it temps come back down
i would not even think about volt modding it till i can get the temps low.
@largon
you stll need pics,if you do i'll take back plate off and get some up this week asap,for the dice/ln2 guys
_________________
cowie,
Since nobody has yet posted pics of the backside...
You were not supposed to see this.
Excuse the quality but I'm not a very good photographer...I'm also not sure if I captured the right areas of the card, so let me know and I will try to get what is needed. I just hope these can help someone out.
EDIT: removed the cruddy images....
Last edited by rdrash; 08-30-2008 at 11:43 PM.
sry for i put up no pics
card went back last week
_________________
Bookmarks