I personally dislike UV fluid, but I do realize you're being sponsored by those guys and that my opinion neither matters nor should REALLY be considered for your project. Had I been doing something similar and wanted UV, I'd probably have wanted to sleeve the tubes themselves with UV-reactive sleeves.
My toys:
Asus Sabertooth X58 | Core i7-950 (D0) | CM Hyper 212+ | G.Skill Sniper LV 12GB DDR3-1600 CL9 | GeForce GTX 670-2048MB | OCZ Agility 4 512GB, WD Raptor 150GB x 3 (RAID0), WD Black 1TB x 2 (RAID0) | XFX 650W CAH9 | Lian-Li PC-9F | Win 7 Pro x86-64
Gigabyte EX58-UD3R | Core i7-920 (D0) | Stock HSF | G.Skill Sniper LV 4GB DDR3-1600 CL9 | Radeon HD 2600 Pro 512MB | WD Caviar 80GB IDE, 4TB x 2 (RAID5) | Corsair TX750 | XClio 188AF | Win 7 Pro x86-64
Dell Dimension 8400 | Pentium 4 530 HT (E0) | Stock HSF | 1.5GB DDR2-400 CL3 | GeForce 8800 GT 256MB | WD Caviar 160GB SATA | Stock PSU | (Broken) Stock Case | Win Vista HP x86
Little Dot DAC_I | Little Dot MK IV | Beyerdynamic DT-880 Premium (600 Ω) | TEAC AG-H300 MkIII | Polk Audio Monitor 5 Series 2's
Nothing really done today, bar a little problem.
I first fitted the Coolermaster 700W PSU (with love from Specialtech. Its about 10mm shorter than the original test PSU I was using. I know I have to add in the length of the modual connections, but as I will only be using one of the Molex/S-ATA power ports, and one of the PCI-E power ports, it won't be a big problem.
It fits in at the back too which is nice.
Here is where the problem starts. When I started designing this mod, I didn't intend to use an Aquaero, but now I do and thats one of the reasons for ze box. I didn't factor that in when designing mark two of the res.
Ooops. (those scratches are on the outer cover film, so all is well)
Well, I'm not desinging that res all over again :p. Soo, I'm thinking that I'll dremel out part of the back of the box, and then add an Acrylic Danger Den 90* bend to take it back towards the PSU. Its a little ennoying I know, but I promise it'll look good.
Or. I could just do away with the box on its own, and have the Aquaero 'floating' or the front panel.
looking good, will be better when its all sleeved...
Woot 100th post
Mobo: Foxconn Bloodrage v1.0
CPU: Core i7 920 (stock) + TRUE Black
RAM: G.Skill NQ 3x1GB DDR3 1600MHz
Graphics: EVGA e-GeForce GTX 260 Core 216 SSC
PSU: Corsair HX620
Case: Antec 900
Storage: Hitachi Deskstar (320GB), Samsung Spinpoint F1 (1TB)
Optical Drive: Samsung SH-S223Q
Sound: Sonar X-FI Audio
Speakers: Logitech x230 2.1
Screen: Samsung SyncMaster 226cw
I've only just found this thread - that res is awesome!!
can't wait to see this thing finished.
Love this project... sub'ed and can't wait for next update
We'll Keep the Red Flag flying high - Because Man United will never die
Thank you very much guys
this is a gread build Mankz keep it up!
Awesome!!!! Good Luck with the rest.
JM
Intel Core2 Quad Q9550 @3.3GHz || DFI x48 T3RS DDR3 || Custom Silverstone Black Temjin TJ-07
Coolermaster Gemini2 (2 120x120x38 Sunon's) Idle-32 Load-46 || 4Gig Patriot Viper DDR3 1333
Crossfired 4850's || Gigabyte Odin 800W PSU || 500gig SATA || Logitech G9 || Samsung 2232GW
Initiate Heat Blasters!
"If I'm lacking in boats, it's cause I'm fearful of the Kraken" -MC Frontalot
looks great mate any updates
+ subscribed
amazing considering your like one year younger then me if you've just finished gcse's school etc!!!!
"Cast off your fear. Look forward. Never stand still, retreat and you will age. Hesitate and you will die. SHOUT! My name is…"
//James
wow! subscribed!
#1
Evga 680i * Q6600 G0 * 4x2gb g.skill Pi * Evga GTX260 (216) - sli * x-fi fatality * Corsair HX1000
#2
Asus Striker II Formula * Q6600 G0 * 4x2gb corsair * Evga 9600gso * corsair hx620
#3 WIP
Asrock Z77 Extreme4-M * 3570K * 2x2gb samsung * 60gb SSD
Damn, that res is tight.....sub'd.Originally Posted by TSXmike
I like it.
Thanks for the comments gang...
Watery will be back with a big bang in September!
I'm so glad I didn't find this thread until now.
I wouldn't have been able to stand the wait.
[SIGPIC][/SIGPIC]
[PURE] AWESOME
Big Bang as in Nv's Big Bang...?
Thermaltake Armor Series Black
GIGABYTE GA-P35-DS3R
Q6600 3.6 GHZ Thermalright Ultra 120 eXtreme
4 GB Corsair XMS2 w/ OCZ XTX Ram Cooler 2 x 60mm
9800GT 512MB
18X Pioneer DVD-RW Burner
720 Watt Enermax Infiniti
4x640GB RAID 10
Windows 7
I'll get the dynamite, or do you want some C4?
Why the delay T_T? I wanna see the end result
Mobo: Foxconn Bloodrage v1.0
CPU: Core i7 920 (stock) + TRUE Black
RAM: G.Skill NQ 3x1GB DDR3 1600MHz
Graphics: EVGA e-GeForce GTX 260 Core 216 SSC
PSU: Corsair HX620
Case: Antec 900
Storage: Hitachi Deskstar (320GB), Samsung Spinpoint F1 (1TB)
Optical Drive: Samsung SH-S223Q
Sound: Sonar X-FI Audio
Speakers: Logitech x230 2.1
Screen: Samsung SyncMaster 226cw
The Laser cutter is at school, and I'm going on Holiday soon for like 4 weeks.I'll get the dynamite, or do you want some C4?
Why the delay T_T? I wanna see the end result
Wow amazing project! This is the best looking case I've ever seen. Subscribed.
Dun Duna Dah!!!
Yes... I have an update!!! But not tonight!
Haha. I hope to put it up tommorrow.
WAAAAH!
The saga surrounding my update is now silly.. My usually postie is looking after his daughter in hospital so we've got a replacement one... Aparantly my bits havn't been delivered because the postie says a 600g box full of litte thingies is too much for him to carry. We live 100y away from the road where he parks his van and he can't be arsed to carry it. So I've got to cycle 4 miles tommorrow to try and pick this stuff up.. FFS...
In other news, my new design program (moved from V7 to Cobalt V8) requires student ID to get my $4,705 discount by I cant seem to get my school to send it out... So no full CAD renders, no progress. Me = miffed.
what a lazy post man
wow...so his laziness of not being able to walk 100 yards is causing you to go four miles, how messed up is that
Sweet build. Nice res
- Case : Silverstone TJ07 Black
- Sound : Asus Xonar Essence STX
- Video : Asus GTX 680 4gb w/ Ek Nickel Block
- Board : ASUS Maximus V Formula Z77
- CPU : Core i5-3570K @ 4.5 Ghz
- CPU Cooler : EK-Supreme HF w/Plexi Top
- Memory : 16GB Samsung 2133mhz 10-9-10-29
- PSU: Enermax Revolution 85+ 1050w
- HDD : Crucial 250gb M4 Raid 0
- Radiator : Thermochill PA 120.3
- Reservoir : EK-Multioption Res 250 Rev.2
- Water Pump : Laing DDC-3.2 w/XSPC Top
8. Its there and back
how is 600g too heavy??? how does he do his shopping!... oh dear this box of corn flakes to too heavy T_T
Mobo: Foxconn Bloodrage v1.0
CPU: Core i7 920 (stock) + TRUE Black
RAM: G.Skill NQ 3x1GB DDR3 1600MHz
Graphics: EVGA e-GeForce GTX 260 Core 216 SSC
PSU: Corsair HX620
Case: Antec 900
Storage: Hitachi Deskstar (320GB), Samsung Spinpoint F1 (1TB)
Optical Drive: Samsung SH-S223Q
Sound: Sonar X-FI Audio
Speakers: Logitech x230 2.1
Screen: Samsung SyncMaster 226cw
Posting Permissions
Reply With Quote
Bookmarks