*Official Retail G0 Q6600 Overclocking Thread*

[FabricioGS]

Finally 3.6Ghz OCCT stable.

OCCT stable in my system does not mean Prime95 stable. Try running at least 1h of Prime95 with the same settings. That would be stable

[iTravis]

OCCT stable in my system does not mean Prime95 stable. Try running at least 1h of Prime95 with the same settings. That would be stable

I was doing Prime95 b4 I found OCCT and I prefer OCCT since it finds error faster than Prime95. My system can be stable for Prime95 in about 4 hours but it fails OCCT after couple mins. As you can see here I had my CPU at 3.4Ghz running both Prime95 and OCCT stable.





@whe3ls: I ran OCCT for 1 hour and real temp by default set TJMax to 95.