CSX DDR3 arrived: Diablo 2000MHz & CEC 1333MHz kits first look

[M@G!C]

Hi Magic, just received mine today, testing on S2E right now. Had problems at first, but now I got it to work using less Vdimm and less vnb.
Mem at 2000 8-7-6-19 2T, vNB 1,54V (~1,58V real, over 1,6 real gave errors) Vdimm 1,94V (1,97V real, around 1,95V is what the CSX rep told me, I had used 2,0V bios before which was too high?)
Apparently my set uses new chips, D9GTS instead of GTR, seems like they don't need/want as much voltage.
Check what yours say, if it's GTS try my suggestions.

Oh yeah, use the white slots.

Edit: Ok, didn't work that well. 1,9V bios suddenly failed at test 3, 1,94V too. Grml back to trying...

My kit as GTR chips, and i´m currently testing in white slots...
I´ve tried a combination of different voltages in NB and Vdimm but till now i was not sucessfull running my kit at 2000Mhz or 1800Mhz 8-7-6-15 ....
All my test are donne LINKED and SINKED. And dont even try to run them at 1T.... It gives errors right away in the first test...

[Achill3uS]

4gb - Gts
2gb - Gtr

The question is, XS guys wants kits with expensive heatspreader including heatpipes, standard low profile heatspreader, or memory without heatspreader?

thanks for clearing as far as i know 2x2 is also GTR. than retail is not, or just not anymore. than some double sided modules don't like that higher voltages even it's GTS.

btw what do you think about the heatspreader question? to sale memorys without (like TG before)?
my opinion is a strong hs wich don't need to replaced or extra cooled (except when you pushing them over the limits)

[M@G!C]

4gb - Gts
2gb - Gtr

The question is, XS guys wants kits with expensive heatspreader including heatpipes, standard low profile heatspreader, or memory without heatspreader?

My kit it´s 4GB and it´s GTR.....

[Kasparz]

Yes, old stock in shops are, but i'm talking about what comes out of csx at the moment, not shops.
Big heatspreader with heatpipes would;d be 40-50$ more than without heatspreaders, thats why i'm asking.

[M@G!C]

Well i will do some more tests, if i continue to receive errors on Memtest at rated speed and timmings for this memory i will hane no other choice then return this kit...

[jcool]

My kit as GTR chips, and i´m currently testing in white slots...
I´ve tried a combination of different voltages in NB and Vdimm but till now i was not sucessfull running my kit at 2000Mhz or 1800Mhz 8-7-6-15 ....
All my test are donne LINKED and SINKED. And dont even try to run them at 1T.... It gives errors right away in the first test...

Lol you won't believe what did the trick for me.. I got memtest interrupt error or something at 1800, so I lowered the vNB to 1,48V bios.. and memtest passed without a hiccup at 1800 8-7-6-19 with 1,9V Vdimm.
Priming now...

[M@G!C]

Lol you won't believe what did the trick for me.. I got memtest interrupt error or something at 1800, so I lowered the vNB to 1,48V bios.. and memtest passed without a hiccup at 1800 8-7-6-19 with 1,9V Vdimm.
Priming now...

1,48 NB and 1,9V Vdimm are real voltage values or the values set on BIOS?

[jcool]

Values set in bios.

[M@G!C]

OK thanks
I will give a try later and see if i have any luck....
Which BIOS do you have?

[jcool]

0901 currently.

[rabor]

Well, received mine today (2x 1GB - D9GTR),

& after some fiddling I got them Memtest-'stable' (4 passes) @ stock DDR2000 8-7-6-19-T1:



Bios settings (Striker2X): VDimm -1.98V / NB 1.48V / SB auto / PLL auto / VTT 1.26V
In Everest these are: VDimm - 2.00V / NB 1.49V / SB 1.50V / PLL 1.52V / VTT 1.26V

Tried OC-ing them a little, & DDR2050 is how far I got them 1 pass Memtest-stable at 8-7-6-19-1T (2.08V BIOS - 2.13V Everest):



I think I like these..

[day187]

Mine are on the way cant wait, keep pushing

[slim142]

Man I wouldnt go higher than 2.02 voltage (real). Even though they have a nice metal heatspreader, killing D9GTR is just.....

[Tyke]

Received my kit this morning, 2 X 2GB with GTS chips! Gonna have a play about over the weekend.

[rabor]

I didn't want to push them past 2.125V, but I didn't know how my S2X' vDimm settings would translate to Everest.. Though at 2.13V (according to Everest..) the heatspreaders hardly warm up, even if you touch them where the chips are located they are lukewarm at best..

They're just great that's what they are.. 'specially after my OCZ-debacle.

[stealth]

Hi,

Has anyone test this kit what is the highest speed can reach and with how much voltage?

http://www.hpm-computer.de/product_i...00-DIABLO.html

I hope they come soon here in Greece.

stealth

[M@G!C]

Hi,

Has anyone test this kit what is the highest speed can reach and with how much voltage?

http://www.hpm-computer.de/product_i...00-DIABLO.html

I hope they come soon here in Greece.

stealth

Link is broken...

[stealth]

Link is broken...

Works fine for me.

Here it is again:

http://www.hpm-computer.de/product_i...00-DIABLO.html

This is the Ram "CSX 2GB Kit DDR3-2000 DIABLO".

stealth

[rabor]

Link works fine with me.. but they're cheaper over here + they got superfast shipping (DHL-Premium).

[slim142]

Does anybody know of a site that will ship this to US?

Also, M@G!C, how is that memory on the striker so far?

[lolhalol]

Does anyone know teh home page for CSX?

[jugeen]

http://www.csx-memory.com/?language=en

[M@G!C]

Finally i found stability with this board!!!

Running my 4GB CSX Diablo DDR3 at 1800FSB 8-8-8-19 linked and sinked P1 and P2 enable!!! My QX9650 is running at 3825 Mhz with only 1,3250v Vcore set on BIOS... not bad i think...
Memtest stable and Prime stable for 5 hours
Also runned 3 loops of 3Dmark 2006 and played Crysis for 1 hour and.... ROCK STABLE!
Will post some Everest bandwidth tests later... ( still priming as i post this) ...
I really tried tight timimgs 8-7-6 and 8-7-7 but gave me errors in Memtest and Prime 95 but i have not give up...

D

[hecktic]

so is jcool going to be the buying agent for XS members in USA & CAN ???/

[Achill3uS]

im also testing my kits (2*1 GTR) on 790i (S2E) now, and its much more easy to make it stable than on intel P45 or X48, i can use less voltage for stability... that's what i've talked about upper, nforce is nforce
1800 7-6-5-18 1T P1&P2:enabled memtest stable @ 1.94v, 2000 7-6-6-18 1T boot & 1M 2M pass @ 2.24v
screens later... need to tweak them more...