X48 Rampage Formula Preview.

[Robilar]

I just wish I could get my QX9650 stable at 10x400. won't happen. I had no difficulty doing so with manageable temps on my EVGA 790i Ultra.

With this board I put 1.42 vcore in bios (LLC disabled) which comes out to about 1.38 under load and temps climb into the mid 60's with orthos.

On the EVGA board, 1.42 in the bios netted 1.344 in windows after vdroop and temps were much lower.


any ideas?

[GAR]

I just wish I could get my QX9650 stable at 10x400. won't happen. I had no difficulty doing so with manageable temps on my EVGA 790i Ultra.

With this board I put 1.42 vcore in bios (LLC disabled) which comes out to about 1.38 under load and temps climb into the mid 60's with orthos.

On the EVGA board, 1.42 in the bios netted 1.344 in windows after vdroop and temps were much lower.


any ideas?

My temps are the same as my 790i, re mount your cpu cooler.

[traveler]

Hey Buds. I am finally passed my non-working floppy drive issue.

So ... now that I can easily boot into Memtest now, I get a few errors with Memtest86 and about a dozen errors with Memtest86+. All errors occur at the end of any test between 99% complete and 100% complete (right before it starts the next test) and the failing address of every error listed is always 00000000000. This happens using any of the four motherboard RAM slots and using either of the two sticks of RAM I have.

Any ideas what to do next? Can I get the OCZ Reaper HPC PC2 8500 RAM that I have to run with no errors at stock speeds or a bit above at this point?



__________________
Asus X48 Rampage Formula / Intel Q9450 / 2 x 2GB OCZ Reaper HPC PC2 8500 / VisionTek Radeon HD3870X2 OverClocked Edition /
Western Digital Raptor X Hard Drive / Two Western Digital Caviar RE2 WD5001ABYS 500GB 7200 RPM SATA 3.0Gb/s Hard Drives /
Creative SoundBlaster X-Fi Elite Pro 7.1 / Creative Gigaworks S750 7.1 Speaker System /
Lian Li 343B cube case / PC Power & Cooling Silencer 750 Crossfire Edition

[Ice009]

Any ideas what to do next? Can I get the OCZ Reaper HPC PC2 8500 RAM that I have to run with no errors at stock speeds or a bit above at this point?

Is there a problem running this RAM on the board? Cause this is the exact same kit I want to buy if I get this board.