[WIP]evil style tube clamps

[pwolfe]

I would buy these in a heart beat if they were on the market.

[BlueAqua]

They look amazing. Great renderings too. I'd probably buy a few.

[aspire.comptech]

Do want.

[Sparky]

thanks

what about the fusion? just clamp then one by one the same you would do with worm drive clamps

Are they going to be as thin as a wormdrive though... anything even slightly thicker than a wormdrive won't fit if you use 7/16" or thicker tubing.

[Pellepel]

Nice! I'd get one, maybe add a nut to the other end, same shape and size but make a the height a little smaller then I think we have a . Maybe it I'll put those compression fittings price in check.

[TedShred]

Never figured I'd be calling a tube clamp gorgeous. 'Til now! Very nice

[Zaskar]

Nice! I'd get one, maybe add a nut to the other end, same shape and size but make a the height a little smaller then I think we have a . Maybe it I'll put those compression fittings price in check.

Other end would most likely be a smaller diameter hole and threaded to the size of the screw.


If possible id make it a little thinner, that looks strong enough to actually be used as a Bike seatpost clamp

[twwen2]

THey look awesome evil!

Pure class right there

[evil-98]

Are they going to be as thin as a wormdrive though... anything even slightly thicker than a wormdrive won't fit if you use 7/16" or thicker tubing.

ill look into that i have the a few fuzions

Nice! I'd get one, maybe add a nut to the other end, same shape and size but make a the height a little smaller then I think we have a . Maybe it I'll put those compression fittings price in check.

Zaskar is right, the other side is threaded so that eliminates the nut. makes the process simpler

Other end would most likely be a smaller diameter hole and threaded to the size of the screw.

If possible id make it a little thinner, that looks strong enough to actually be used as a Bike seatpost clamp

ive already drawn up a thinner version, but i think ill have to do a few sizes to see which is going to be best

[HaCKs]

I want them! I like to run my systems without clamps because of aesthetic reasons, but these are worthy!

Let us know when we can buy them.

[evil-98]

I want them! I like to run my systems without clamps because of aesthetic reasons, but these are worthy!

Let us know when we can buy them.

im going to finalize the design hopefully tonight and get an estimate this week so hopefully well have some really soon.

now just need to find a local anodizer..

color wise for sure so far is:

1.Black
2.White
3.Red
4.Blue
5.Chrome/Black Nickle

material wise, generally aluminum with a stainless steel bolt and maybe copper.

any other colors? i think thats generally all we need right?

[Eddie3dfx]

Green!

[Zaskar]

Remember cant anodize white, would have to be powder coated. Can make it silver though (prettymuch same color as the aluminum, but anodized to prevent natural corrosion)

[evil-98]

Remember cant anodize white, would have to be powder coated. Can make it silver though (prettymuch same color as the aluminum, but anodized to prevent natural corrosion)

are you serious? damn! i remember seeing a bunch of paintball markers back when i played being anodized white.. maybe it wasnt white lol

i guess it could be raw, or silver, i dont want to powder coat as the material
will get very thick, and the bolt maybe have issues moving smoothly

thanks for the info

[SiGfever]

Very nice...clamp evolution.

[evil-98]

want your wife to get involved?

24 karat ban with 3 3/4 karat diamonds with a silver bolt

aside from that, its thinner which appears more appealing, so think thinner it is

[BNDMOD]

Wonderfull.. i want two or three pears of red and black

Which is the cost of pair?

[Aqua-Pc's]

These do look great!

PM me as we will take some

[evil-98]

These do look great!

PM me as we will take some

great, ill get you in touch

[Sparky]

Yes, the thinner looks good!

[Pellepel]

ill look into that i have the a few fuzions
Zaskar is right, the other side is threaded so that eliminates the nut. makes the process simpler

Actually I was just thinking there should be one there, make it proportionate to the hex bolt cap. thought it would look better I don't know

Maybe add some grooves around the clamp, like the one you see on compression fittings. Just throwing some ideas

[evil-98]

Actually I was just thinking there should be one there, make it proportionate to the hex bolt cap. thought it would look better I don't know

Maybe add some grooves around the clamp, like the one you see on compression fittings. Just throwing some ideas

i can always use lower profile socket cap screws or make the large enough to counter sink the screws.

i like the bolt size right now, but its always good to hear opinions. makes the design all that much better

[71 (Bryan)]

looks good bro but im pretty sure ive seen something exactly the same somewhere else but still, thats pretty awesome bro

[philbrown23]

when will these be done? also 1/2 size?

[71 (Bryan)]

want your wife to get involved?

24 karat ban with 3 3/4 karat diamonds with a silver bolt

aside from that, its thinner which appears more appealing, so think thinner it is

save that one as a one of for me, i'll use it as a wedding ring