After a few trial-and-error runs, i came up with this:

- Lowered CPU PLL Voltage from 1,52v to 1,50v
- Lowered FSB Termination Voltage from 1,26v to 1,20v
- Lowered VCORE voltage from 1,43750v to 1,42500v (go easy, these are BIOS values)
- Increased NB voltage from 1,28v to 1,30v

Still stable and a tiny bit cooler on the CPU. Also tightened a bit more the RAM timings and it holds. I'm gonna depurate this a bit more and then post a template/pictures.

I am guessing i can lower the VCORE a bit more because my NB had the voltage too low and crashed when i lowered VCORE? Time and testing will tell