Yes, my strap is at 333.Originally Posted by fatguy1992
I just remembered that I could get my mobo to post with a FSB above 405 before, then I uped the FSB strap to north bridge to 333 and it works great. Have u tried uping the FSB strap to north bridge?
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
My Q6600 can't go past 3.6GHz... I think I degraded it from HEAT?????
VID: 1.2125v
1.7%
Dumb question: witch is better, 266 or 333?
Mine Q6600 can do 450x8 @ strap 266 prime stable.
Intel Core i7 920 D0 @ 4.2GHz HT On #3844A716
Evga Classified 760 X58 SLI
3x2GB DDR3 OCZ Heaper HTC 1833 @ 2000 9-8-9-26 1.65v
Thermalright Ultra 120 Extreme + MX-2
HIS 4870 512MB @ 800/1000
PSU Aurora eXtream 700W
22" LG 720p 22LG30R
Case Apple G5 Mod
The lower, the better. The lower strap, the lower board timings, the better performance.
Main system:
Q6600 G0 L737B 3,8GHz
Maximus Formula X38
Ballistix PC2-8500 2x1GB
XFX 8800GT XT
Corsair HX620
X-Fi Platinum
150GB Raptor (Dual Boot) /2x 250GB WD Caviar (Apps)
Lian-Li V2000B Plus II
School: MacBook
Studying in: Pharmacy
Where: University of Montreal
Thanks, that's what I've imagined. But I want to push my fsp above 450 I'd better use strap 333 right? Which voltages should I rase besides FSB? PLL? NB?
Intel Core i7 920 D0 @ 4.2GHz HT On #3844A716
Evga Classified 760 X58 SLI
3x2GB DDR3 OCZ Heaper HTC 1833 @ 2000 9-8-9-26 1.65v
Thermalright Ultra 120 Extreme + MX-2
HIS 4870 512MB @ 800/1000
PSU Aurora eXtream 700W
22" LG 720p 22LG30R
Case Apple G5 Mod
Mostly vNB and VTT, also you may have to play around the GTL settings on both sides... easy with the vPLL as it'd damage the CPU in certain mobos (e.g. DFI LT/UT series).
This morning I amllost got 4.1GHz, 4095MHz LOL. I had the FSB @ 455, but as soon as I put it to 460 it would post, but crash while loading windows. I rasied the volts higher and higher, but still not stable
I was running out of time so i didn't run any more benchmarks.
heres with my Q6600
My Loop: mcr320/d5 vario/d tek fuzion/3x ultra kaze 2000's Case: Modified RocketFish Rig: AMD 720BE X3 Biostar TA790GX A3+ Super Talent 2x2GB WD 320AAKS His HD3870x2 Ultra X3 600W
Whats your cooling?
And VID?
That's an alright suicide shot but what can it really do?
dx58so
w3520@4100
4x1gb corsair ddr3-1333
gtx 295
TR ultra-x, 2 scythe ultrakaze push/pull
xclio stablepower 1000
vista ultimate
[SIGPIC][/SIGPIC]
-------------------------------
would you crunch if you thought it would save her life?
maybe it will!
I Can't get more than 3.1GHZ @ 1.3750 stable.
3.2, 3.3, 3.5ghz no post at all.
3.6ghz ran only @ 1.5750 but not even 10 second prime stable, think I need 1.7v to get it stable !
Heat is not that high since I get 37 max on full load (TRUE-120, Akasa 1700RPM fan)
I've been non-stop working for 5 hours and read too much but no success, O/C on EP45-DS3 is really complicated and differs from other boards.
Intel Core 2 Quad Q6600 L807A
TRUE-120 / Scythe ULTRA Kaze
Gigabyte EP45-DS3
G.Skill PC2-6400 8GB (4*2GB) PQ
Sapphire HD4870
2* Seagate Barracuda 7200.10 320GB
Samsung EcoGreen F1 1TB
Western Digital Green 1TB
Enermax Noisetaker II 600watts
LG L226WTP-BF 22-Inch
Gigabyte 3D Aurora 570
Apple MacBook MB402LL/A
The board takes a little getting used to at first. Part of that is getting the strap set correctly for your setup. That's the two jumpers right by the pci-e slot. I set mine in the 266-333 position as shown in the manual. What bios are you on? There's a beta I'm using, A7514IMS.143 dated July, 28. I can host it for download if anyone's interested. Here are some screens... cpuz and load temps first
and bios screens including health monitor
Last edited by loonym; 08-04-2008 at 04:10 AM.
dx58so
w3520@4100
4x1gb corsair ddr3-1333
gtx 295
TR ultra-x, 2 scythe ultrakaze push/pull
xclio stablepower 1000
vista ultimate
[SIGPIC][/SIGPIC]
-------------------------------
would you crunch if you thought it would save her life?
maybe it will!
I Don't think I've that jumper thing in my mobo, I will keep testing again today.
Thanks for posting your settings.
Intel Core 2 Quad Q6600 L807A
TRUE-120 / Scythe ULTRA Kaze
Gigabyte EP45-DS3
G.Skill PC2-6400 8GB (4*2GB) PQ
Sapphire HD4870
2* Seagate Barracuda 7200.10 320GB
Samsung EcoGreen F1 1TB
Western Digital Green 1TB
Enermax Noisetaker II 600watts
LG L226WTP-BF 22-Inch
Gigabyte 3D Aurora 570
Apple MacBook MB402LL/A
Yeah I suppose you wouldn't have those. It's an msi thing. Still strap is very important for oc success, experiment a little.
dx58so
w3520@4100
4x1gb corsair ddr3-1333
gtx 295
TR ultra-x, 2 scythe ultrakaze push/pull
xclio stablepower 1000
vista ultimate
[SIGPIC][/SIGPIC]
-------------------------------
would you crunch if you thought it would save her life?
maybe it will!
water and 1.2125
and proof of vid
that was on my old max extreme im real starting to hate this 780i. nothing is really stable past 3.6
Last edited by whe3ls; 08-04-2008 at 03:21 PM.
My Loop: mcr320/d5 vario/d tek fuzion/3x ultra kaze 2000's Case: Modified RocketFish Rig: AMD 720BE X3 Biostar TA790GX A3+ Super Talent 2x2GB WD 320AAKS His HD3870x2 Ultra X3 600W
That's an alright suicide shot but what can it really do?
I don't see the point of high suicide shot, to me it's pointless if it's not prime stable.
Desktop - Asus P4C800-E Deluxe Rev 2.0 Fully Hell-Modded
3.0C @ 3.824 255fsb 1.65vcore | SP-94 w/92mm Delta 110cfm, Tiger1 NB HS/Fan | 1gig XMS PC3500 BH-5 1:1 510mhz 2-2-2-5@3.38vdimm | Softmod Sapphire 9500np 441/348 w/SLK-900u (Vgpu@1.75v, Vddr@3.25v Hell-Modded) Cat 4.9 beta | TBSC Sound Card, NEC 1760NX-White | 2X WD 80g SE 8mb cache Raid 0, 1x 60g Maxtor storage | Antec TP550W @3.75v, 5.35v, 12.35v Hell-modded
3DMark2001SE - Now hit 23032 | 3DMark2003 - 6912 ............................Thanks Hell-Fire for all the modding
Laptop -Compaq R3240US | A64 3200+ | 512mb |4x Nec 5500a DVD writer | G4 440go 64mb | 60g hard drive | Win XP-Home
Dont you love the 4ghz on air but they never show prime pics.
MM H2gO - Win 7 Pro
2 PA120.2 Thermochill
MCP355 w/XSPC res top
i5-2500k @ 5.0ghz w/Heatkiller 3.0
Corsair HX850 - M IV Gene-z
GTX 480 w/DD 480 ni/cu
One minute of Prime @ 3.9GHz isn't very convincing...
1.7%
lol same thing I was thinking
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Hell, I'm still trying to figure out what's wrong with my 3 hours Prime Stable then BAM Crash problem.
1.7%
Same here Prime stable for 2 hour straight (400x9), I shut it down went to sleep. Start Priming the next day and it didn’t even last 5 minutes...
Then it just keeps freezing continuously between 5-10 minutes. Not sure how the hell it even pass 2 hours in the first place…
Cooler Master Haf X
i5 3750k
Asrock Xtreme 4
660 Ti
This is some scores I did with 1.28vcore a while ago with a 1.2125v VID (2nd pic has a long run prime):
*****Q6600 1.28vcore 400*9 3600Mhz and DDR2@1201 (Performance Level 5-6): new config
*****Q6600 1.28vcore 400*9 3600Mhz and DDR2@1066 (Performance Level 6-7):
[/QUOTE]
Current Setup 24/7 with 1200DDR2:
//RETIRED-o00o--°(_)°--o00o-OVERCLOCKER//
wow i have the same batch but the lowest i can seem to go is 1.344 @ 400x9. hmmm...
My Loop: mcr320/d5 vario/d tek fuzion/3x ultra kaze 2000's Case: Modified RocketFish Rig: AMD 720BE X3 Biostar TA790GX A3+ Super Talent 2x2GB WD 320AAKS His HD3870x2 Ultra X3 600W
Thats probably the extra fine tune I have on the DFi board in comparison to the eVga.
I have all GTL settings fine tuned for the Quad.
//RETIRED-o00o--°(_)°--o00o-OVERCLOCKER//
Wow those vcore's are super low for 3.6.
How'd you manage that?
Mostly because of the DFI and Low Vid?
Posting Permissions
Reply With Quote
Bookmarks