Quote Originally Posted by Paodaf View Post
Hi,
is it good settings for Q9450 for 3200Mhz?
I'm not sure about CPU GTL Voltage, is 0.63 safe for this CPU?]
Thanks

FSB Strap to North Bridge: 333
FSB Frequency: 400
PCI-E Frequency: 100
DRAM Frequency: 801
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: AUTO
CPU Voltage: 1.22
CPU GTL Voltage Reference (0/2): AUTO --> I run 0.63 on my Qx
CPU GTL Voltage Reference (1/3): AUTO --> I run 0.63 on my Qx
CPU PLL Voltage: 1.52
FSB Termination Voltage: 1.1 --> change on 1.12 (your setting overvolts badly)
DRAM Voltage: 1.82
NB Voltage: 1.2
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO
Just change the FSB Term Voltage... and try to find the lowest stable setting besides 1.1...

To gain some ram performance try to set Transaction booster to Manual and go as low as possible... 10 should be doable... also try to play with the Clock twister : Moderate maybe...

For the rest looks fine...