Page 7 of 10 FirstFirst ... 45678910 LastLast
Results 151 to 175 of 241

Thread: AMD 45nm Deneb Pictures, CPU-Z and Super Pi Results

  1. #151
    Xtreme Member
    Join Date
    Dec 2006
    Location
    Bulgaria/Plovdiv
    Posts
    263
    With good marketing they could increase their sales

  2. #152
    Xtreme Cruncher
    Join Date
    Aug 2006
    Location
    Denmark
    Posts
    7,747
    Quote Originally Posted by Rammsteiner View Post
    Not sure. I do see it happen Deneb is going to compete with Lynnfield. In the end you got to ask your self where it's going to compete with Intel. It won't compete with Bloomfield, Im pretty sure about that.

    But Lynnfield/Yorkfield, I do see it happen. Maybe a bit hopefull, but a realistic option.

    It also depends a bit how much DDR3 would influence Phenom's performance.
    Friendly advice. Dont expect too much until its really there. Also since the core aint radically changed, its still inferiour to a Core 2 core.

    DDR3 wont do anything, cept synthetics and rates benches. We aint bandwidth limited today. So unless the Phenom gonna clock higher than Lynnsfield. It wont touch it. Specially not with SMT enabled either. Yorkfield it can if its something where the FSB strangles it. But again, that sure aint games....

    In short, think abit conservative. Else it quickly ends like last time and Barcelona being 50% faster...

    If 1 bench, then Yorkfield is also 100% faster than Kentsfield
    Crunching for Comrades and the Common good of the People.

  3. #153
    Banned
    Join Date
    Jul 2008
    Posts
    26
    I'm not surprised. SuperPi is cache-intensive, and I believe that the performance increase in SuperPi is mainly due to the increased cache in 45nm Phenom. However, most of the other applications are not as cache-intensive as SuperPi, so I highly doubt that the other applications would show the same increase as SuperPi.

  4. #154
    Xtreme Addict
    Join Date
    Oct 2005
    Location
    EvE-Online, Tranquility
    Posts
    1,978
    Quote Originally Posted by Shintai View Post
    Friendly advice. Dont expect too much until its really there. Also since the core aint radically changed, its still inferiour to a Core 2 core.

    DDR3 wont do anything, cept synthetics and rates benches. We aint bandwidth limited today. So unless the Phenom gonna clock higher than Lynnsfield. It wont touch it. Specially not with SMT enabled either. Yorkfield it can if its something where the FSB strangles it. But again, that sure aint games....

    In short, think abit conservative. Else it quickly ends like last time and Barcelona being 50% faster...

    If 1 bench, then Yorkfield is also 100% faster than Kentsfield
    No, Im not expecting it actually 'will' 100% be competitive with Lynnfield. I just dont think it's going to be impossible however it all depends mainly on Deneb's clock yields and eventual further IPC improvements.

    As for DDR3, dont know really. Upcoming GPU's do require quite a bit of bandwith though, but if it would bottleneck DDR2 bandwith to justify DDR3, not sure.

    But as you said, Im not setting up my mind like Deneb would become the new C2Q to say it like that. Ill wait for the release for sure.

    To make my point a bit more clear thus far, I think the delta between Yorkfield and Agena will be significantly reduced compared with Lynnfield and Deneb. But still, only thoughts, no hard proof and not expecting too much
    Synaptic Overflow

    CPU:
    -Intel Core i7 920 3841A522
    --CPU: 4200Mhz| Vcore: +120mV| Uncore: 3200Mhz| VTT: +100mV| Turbo: On| HT: Off
    ---CPU block: EK Supreme Acetal| Radiator: TCF X-Changer 480mm
    Motherboard:
    -Foxconn Bloodrage P06
    --Blck: 200Mhz| QPI: 3600Mhz
    Graphics:
    -Sapphire Radeon HD 4870X2
    --GPU: 750Mhz| GDDR: 900Mhz
    RAM:
    -3x 2GB Mushkin XP3-12800
    --Mhz: 800Mhz| Vdimm: 1.65V| Timings: 7-8-7-20-1T
    Storage:
    -3Ware 9650SE-2LP RAID controller
    --2x Western Digital 74GB Raptor RAID 0
    PSU:
    -Enermax Revolution 85+ 1250W
    OS:
    -Windows Vista Business x64


    ORDERED: Sapphire HD 5970 OC
    LOOKING FOR: 2x G.Skill Falcon II 128GB SSD, Windows 7

  5. #155
    Registered User
    Join Date
    Jan 2008
    Posts
    26
    According to this article at Toms Hardware, a single Agena core is right around 13% faster than a single Windsor core, on average. This 13% figure represents the average difference between the cores tested in 18 games and apps, and exludes synthetic benchmarks. They didn't test Super Pi, but comparing my Phenom 9850 @ 3GHz with 3GHz Windsor scores on the internet, it appears that Agena is about 14-15% faster than Windsor in Super Pi. So with AMD processors, at least, it appears that improvements in Super Pi closely track improvements in games and apps.

  6. #156
    Xtreme Addict
    Join Date
    May 2008
    Posts
    1,192
    Well we will just have to wait and see. I really dont trust much hype anymore after nV's "whoopass".
    Quote Originally Posted by alacheesu View Post
    If you were consistently able to put two pieces of lego together when you were a kid, you should have no trouble replacing the pump top.

  7. #157
    Xtreme Enthusiast
    Join Date
    Oct 2006
    Posts
    658
    Quote Originally Posted by Yokozuna View Post
    According to this article at Toms Hardware, a single Agena core is right around 13% faster than a single Windsor core, on average. This 13% figure represents the average difference between the cores tested in 18 games and apps, and exludes synthetic benchmarks. They didn't test Super Pi, but comparing my Phenom 9850 @ 3GHz with 3GHz Windsor scores on the internet, it appears that Agena is about 14-15% faster than Windsor in Super Pi. So with AMD processors, at least, it appears that improvements in Super Pi closely track improvements in games and apps.
    K10.5 vs K10 and K10 vs K8 is a whole different matter though, I'm not sure you can really come to any conclusions based on that alone - there are a lot more performance tweaks in K10 over K8 than there are in K10.5 over K10.

    Like I said earlier, if its possible, someone should test their Phenom with the L3 disabled and see what kind of impact it has on SuperPi scores.

  8. #158
    Xtreme Cruncher
    Join Date
    Jun 2006
    Posts
    6,215
    Quote Originally Posted by Epsilon84 View Post
    K10.5 vs K10 and K10 vs K8 is a whole different matter though, I'm not sure you can really come to any conclusions based on that alone - there are a lot more performance tweaks in K10 over K8 than there are in K10.5 over K10.

    Like I said earlier, if its possible, someone should test their Phenom with the L3 disabled and see what kind of impact it has on SuperPi scores.
    AFAIK,you can't just turn off the L3 cache in K10.What you can do is use B2 stepping and apply the TLB patch for it.In this way you will penalize the CPU when L3 cache is concerned (as much as possible at this moment since the L3 can't be turned off).

  9. #159
    Xtreme Addict
    Join Date
    Jan 2007
    Location
    Brisbane, Australia
    Posts
    1,264
    I tend to disagree.. Turning the TLB workaround on does a lot more (worse) to performance than if you were to simply 'remove' the L3..

  10. #160
    Xtreme Cruncher
    Join Date
    Jun 2006
    Posts
    6,215
    Quote Originally Posted by mAJORD View Post
    I tend to disagree.. Turning the TLB workaround on does a lot more (worse) to performance than if you were to simply 'remove' the L3..
    Well since you can't remove the L3,what do you suggest instead?

  11. #161
    Xtreme Mentor
    Join Date
    Apr 2005
    Posts
    2,550
    Quote Originally Posted by informal View Post
    Well since you can't remove the L3,what do you suggest instead?
    actually mAJORD is correct! You can't simulate lack of L3 by turning on TLB fix! it's just not the same thing! What I predict for K10.5 w/o L3 is really small penalization 'cos of the absence of L3, especially for the X3 and X2 versions.

    'cos of the microarchitecture improvements of K10.5 I'd expect models w/o L3 will be in the level of Agena's performance clock-by-clock, with much higher OC headroom.
    Adobe is working on Flash Player support for 64-bit platforms as part of our ongoing commitment to the cross-platform compatibility of Flash Player. We expect to provide native support for 64-bit platforms in an upcoming release of Flash Player following the release of Flash Player 10.1.

  12. #162
    Xtreme Enthusiast
    Join Date
    Jul 2004
    Location
    London
    Posts
    577
    i honestly dont think the l3 cache increase can account for more than a 4% performance increase
    i7 920@4.34 | Rampage II GENE | 6GB OCZ Reaper 1866 | 8800GT (zzz) | Corsair AX750 | Xonar Essence ST w/ 3x LME49720 | HiFiMAN EF2 Amplifier | Shure SRH840 | EK Supreme HF | Thermochill PA 120.3 | MCP355 | XSPC Reservoir | 3/8" ID Tubing

    Phenom 9950BE @ 3400/2000 (CPU/NB) | Gigabyte MA790GP-DS4H | HD4850 | 4GB Corsair DHX @850 | Corsair TX650W | T.R.U.E Push-Pull

    E2160 @3.06 | ASUS P5K-Pro | BFG 8800GT | 4GB G.Skill @ 1040 | 600W Tt PP

    A64 3000+ @2.87 | DFI-NF4 | 7800 GTX | Patriot 1GB DDR @610 | 550W FSP

  13. #163
    Xtreme Addict
    Join Date
    Apr 2008
    Location
    Lansing, MI / London / Stinkaypore
    Posts
    1,788
    Quote Originally Posted by Nedjo View Post
    'cos of the microarchitecture improvements of K10.5 I'd expect models w/o L3 will be in the level of Agena's performance clock-by-clock, with much higher OC headroom.
    Well not actually

    Less volts to start with, but at 3.5 you end up probably within throwing distance.
    Quote Originally Posted by radaja View Post
    so are they launching BD soon or a comic book?

  14. #164
    Registered User
    Join Date
    Jul 2008
    Location
    Pearland, Texas USA
    Posts
    5
    anybody have info how many megawatts is the tdp for deneb? if im not wrong it shouldn't exceed the mobo design w/c is around 140watts? thanks.. can't wait for deneb to get to market, im forgoing phenom due to high heat, it's currently 100degrees here and having a hot pc under the desk doesnt help.

  15. #165
    Xtreme Cruncher
    Join Date
    Jul 2006
    Posts
    1,374
    The two most important things for AMD to do with Deneb are to lower the TDP and the L3 latencies. There isn't going to be a huge architecture change, and a huge change in IPC. What seems to be shown through the SP 1M is that the latter has been accomplished, at least to some degree. Granted, SP is cache defendant, but I don't recall the speedup from Intel's shift of 2->4Mb of cache to have improve the times by even 10%, and even then there are differences between the effects due to FSB vs. HT. As far as the TDP is concerned, I'm not so sure, and the voltages needed to get the OC'ed speeds are down-right scary. Both of these things would improve the general performance enough to tide them over until they can draw up a better architecture....

  16. #166
    Registered User
    Join Date
    Mar 2008
    Posts
    4
    Ya'll are funny

    Quote Originally Posted by IvanAndreevich View Post
    Not going to happen, sorry. Best you can hope for is around 3.5 GHz.
    I got the BS meter out and it's off the scale.

    Even at 3.5 though for a quad is more than most people would need. You know how those Johnsons are always trying to beat the Johnsons though.

    It may not happen immediately but given time I'm sure it will be there. Although the brisbanes were at about all they were going to get out of them from the beginning I guess. Couple of steppings and only a couple of 100MHZ later. I think AMD knows they need to get in the game though. The newer south bridge is already showing a marked improvement on overclocking the phenoms with the same chip.

    I think some of the overclocking not being so good on the phenoms is the board quality also though. I have not really seen too many really good looking phenom capable boards. Half the boards out there are barely phenom capable much less once you start pushing the 150w envelope.

    Anyway readthrough has been fun!!!!

    Love the super pi bs though. I do 1m in just under 27 or right over 27. The rest of my #s are close to e7200 ones which run 1m at under 20. Most my futuremark scores an Intel has to be clocked really well to take me by any kind of a margin. As in above 3.5ghz. This is just comparing the same graphics card though, X1950 pro in crossfire. I get 9000 in 06 but an Intel with the same FPS gets 12000 and the cpu mark is all that!! Thus cards are bottlenecking. The newer 4800 series cards like some cpu to feed them though. I notice nice FPS increase with CPU increase on these cards. PcMark is little strange on my scores. Almost 7000 but think it should be a little more, not sure what is going on there though. HDD scores are a little lower than they should be I believe and HDD virus scan is really low?? May be the SB600 on my board or something else but who knows???

    MMMM 45nm Thx for the laughs all.

  17. #167
    Xtreme Mentor
    Join Date
    Mar 2006
    Posts
    2,978
    Quote Originally Posted by mAJORD View Post
    I tend to disagree.. Turning the TLB workaround on does a lot more (worse) to performance than if you were to simply 'remove' the L3..
    For a super PI run, though, the effect is negligble ... perhaps 5% ... if superpi is truly this cache senstive, then starving it of 2 megs of cache should have a greater impact.
    One hundred years from now It won't matter
    What kind of car I drove What kind of house I lived in
    How much money I had in the bank Nor what my cloths looked like.... But The world may be a little better Because, I was important In the life of a child.
    -- from "Within My Power" by Forest Witcraft

  18. #168
    Xtreme Addict
    Join Date
    Feb 2006
    Location
    northern ireland
    Posts
    1,008
    Quote Originally Posted by LOE View Post

    Yeah, it won't be able to outperform nehalem, but thats not really an issue cuz nehalem won't go mainstream for a while.

    If deneb turns out to be a success amd will finally be able to offer high end products, not ultra high end enthusiast, but it will have parts that are above mainstream. And later, when they implement metal gates it should give them a nice boost.

    i
    Sorry, Is this not a contradiction? Are you saying that deneb does not need to worry about nehalem because nehalem will be above mainstream but also deneb will be a success because it will allow AMD to sell cpus above the mainstream level?

    Also, IS there not going to be a $266 nehalem? Would this not be mainstream?

  19. #169
    Xtreme Enthusiast
    Join Date
    Oct 2006
    Posts
    658
    Quote Originally Posted by LOE View Post
    Well, I don't know where you get your info from, but all people that seem to have any sources at all say deneb will be faster than penryn clock for clock, and that amd will ship 3Ghz parts this year

    Yeah, it won't be able to outperform nehalem, but thats not really an issue cuz nehalem won't go mainstream for a while.

    If deneb turns out to be a success amd will finally be able to offer high end products, not ultra high end enthusiast, but it will have parts that are above mainstream. And later, when they implement metal gates it should give them a nice boost.

    i think everyone who is not an idiot would want amd to go back on track in the cpu business, it will benefit us all : See what they did with the GPU market - now more people can afford to buy the GTX280 and troll about it
    I'd lile to see the quotes from the 'sources' that say Deneb will be faster than Penryn per clock.

    As for Nehalem, the 2.66GHz part will cost $284. If a 3GHz Deneb cannot outperform it (which I think is highly likely) then the most AMD can expect to charge for it is around ~$250, or if they keep their current pricing system, $235 like the 9950BE.

    I'm starting to think that Intel deliberately priced Nehalem so low to hurt AMD's ASPs. They want to keep AMD on life support, strong enough to survive so they don't become a monopoly, but not really strong enough financially to really challenge them from a R&D standpoint.

  20. #170
    Xtreme Mentor
    Join Date
    Aug 2006
    Location
    HD0
    Posts
    2,646
    so about 20% slower per clock than the penryns... and they'll probably clock to around 3.5Ghz.

    well it's a start. definitely better.

  21. #171
    Xtreme Cruncher
    Join Date
    Aug 2006
    Location
    Denmark
    Posts
    7,747
    Quote Originally Posted by LOE View Post
    Well, I don't know where you get your info from, but all people that seem to have any sources at all say deneb will be faster than penryn clock for clock, and that amd will ship 3Ghz parts this year

    Yeah, it won't be able to outperform nehalem, but thats not really an issue cuz nehalem won't go mainstream for a while.
    Would that be the same sources with 3Ghz Phenom and 30000 3Dmark06 and 50% faster than Kentsfield in averge? Im curious....
    Crunching for Comrades and the Common good of the People.

  22. #172
    Xtreme Addict
    Join Date
    Oct 2005
    Location
    EvE-Online, Tranquility
    Posts
    1,978
    Deneb being >= than Yorkfield isnt something new. Agena isnt all that far away from it if clocked up.

    Anyhow, is Bloomfield going to be priced for 284$? That's indeed lower than expected however the price for Bloomfield's motherboards most likely wont be <100$ (at least for a while). Also you need 3 sticks of DDR3 although I dont think that would be a major money sink.

    However, keep in mind you'll have locked multipliers etc. Deneb Black Edition/FX will offer unlocked multi's for not too much money.

    Current Phenoms can clock well beyond 3Ghz on a SB750 board. Current Deneb results has been on SB600, curious what SB750 would do for Deneb.
    Synaptic Overflow

    CPU:
    -Intel Core i7 920 3841A522
    --CPU: 4200Mhz| Vcore: +120mV| Uncore: 3200Mhz| VTT: +100mV| Turbo: On| HT: Off
    ---CPU block: EK Supreme Acetal| Radiator: TCF X-Changer 480mm
    Motherboard:
    -Foxconn Bloodrage P06
    --Blck: 200Mhz| QPI: 3600Mhz
    Graphics:
    -Sapphire Radeon HD 4870X2
    --GPU: 750Mhz| GDDR: 900Mhz
    RAM:
    -3x 2GB Mushkin XP3-12800
    --Mhz: 800Mhz| Vdimm: 1.65V| Timings: 7-8-7-20-1T
    Storage:
    -3Ware 9650SE-2LP RAID controller
    --2x Western Digital 74GB Raptor RAID 0
    PSU:
    -Enermax Revolution 85+ 1250W
    OS:
    -Windows Vista Business x64


    ORDERED: Sapphire HD 5970 OC
    LOOKING FOR: 2x G.Skill Falcon II 128GB SSD, Windows 7

  23. #173
    Xtreme Addict
    Join Date
    Apr 2006
    Location
    City of Lights, The Netherlands
    Posts
    2,381
    Quote Originally Posted by Rammsteiner View Post
    Deneb being >= than Yorkfield isnt something new. Agena isnt all that far away from it if clocked up.
    Agena being close to Yorkfield performance when overclocked is not really a fair comparison as you can also overclock the Yorkfield and then this gap will still be there. I sure do hope that Deneb will be >= Yorkfield (talking stock clocks for what's available in retail), they are after all releasing Deneb 1 year after Yorkfield was launched. What some people are claiming though is that Deneb will be >= to Yorkfield clock for clock, which I think is a bit unrealistic but I don't mind being wrong on this assumption as this would benefit us all.
    "When in doubt, C-4!" -- Jamie Hyneman

    Silverstone TJ-09 Case | Seasonic X-750 PSU | Intel Core i5 750 CPU | ASUS P7P55D PRO Mobo | OCZ 4GB DDR3 RAM | ATI Radeon 5850 GPU | Intel X-25M 80GB SSD | WD 2TB HDD | Windows 7 x64 | NEC EA23WMi 23" Monitor |Auzentech X-Fi Forte Soundcard | Creative T3 2.1 Speakers | AudioTechnica AD900 Headphone |

  24. #174
    Xtreme Addict
    Join Date
    Oct 2005
    Location
    EvE-Online, Tranquility
    Posts
    1,978
    Quote Originally Posted by Helmore View Post
    Agena being close to Yorkfield performance when overclocked is not really a fair comparison as you can also overclock the Yorkfield and then this gap will still be there. I sure do hope that Deneb will be >= Yorkfield (talking stock clocks for what's available in retail), they are after all releasing Deneb 1 year after Yorkfield was launched. What some people are claiming though is that Deneb will be >= to Yorkfield clock for clock, which I think is a bit unrealistic but I don't mind being wrong on this assumption as this would benefit us all.
    For if it wasnt clear, I mean equal clocks
    Synaptic Overflow

    CPU:
    -Intel Core i7 920 3841A522
    --CPU: 4200Mhz| Vcore: +120mV| Uncore: 3200Mhz| VTT: +100mV| Turbo: On| HT: Off
    ---CPU block: EK Supreme Acetal| Radiator: TCF X-Changer 480mm
    Motherboard:
    -Foxconn Bloodrage P06
    --Blck: 200Mhz| QPI: 3600Mhz
    Graphics:
    -Sapphire Radeon HD 4870X2
    --GPU: 750Mhz| GDDR: 900Mhz
    RAM:
    -3x 2GB Mushkin XP3-12800
    --Mhz: 800Mhz| Vdimm: 1.65V| Timings: 7-8-7-20-1T
    Storage:
    -3Ware 9650SE-2LP RAID controller
    --2x Western Digital 74GB Raptor RAID 0
    PSU:
    -Enermax Revolution 85+ 1250W
    OS:
    -Windows Vista Business x64


    ORDERED: Sapphire HD 5970 OC
    LOOKING FOR: 2x G.Skill Falcon II 128GB SSD, Windows 7

  25. #175
    Xtreme Enthusiast
    Join Date
    Oct 2006
    Posts
    658
    Quote Originally Posted by Rammsteiner View Post
    For if it wasnt clear, I mean equal clocks
    For Deneb to be >= to Yorkfield, it'll need to be 15 - 20% faster than 65nm Phenoms. This seems a bit unrealistic, when was the last die shrink (even with core enhancements + cache increases) that yielded a 15 - 20% increase in performance? Northwood was about 10% faster than Willamette, thats the biggest I've seen from a die shrink. In more recent times, Penryn is some 5 - 6% faster than Conroe. Off the top of my head, I don't remember any AMD die shrinks that have resulted in significantly improved performance, in fact performance went down slightly in the last K8 shrink from 90nm to 65nm.

    Now obviously Deneb will increase performance some, the larger L3 alone guarantees that, but all I'm saying is that 15 - 20% is a LOT to ask for. K8 to K10 improved by about that margin per clock, and we're talking an architectural overhaul. You're asking for the same increase from a die shrink + some enhancements, it seems a bit optimistic IMO but time will tell. I personally think Deneb will be 5 - 10% faster per clock, putting it around Kentsfield levels but slightly slower than Yorkfield. Hopefully I am wrong and Deneb lives up to the hype you guys are heaping on it, but I've sort of lost confidence in AMD's ability to deliver, especially on the CPU side of things.

Page 7 of 10 FirstFirst ... 45678910 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •