"ASUS P5Q Deluxe discussion".

[Leeghoofd]

Hi, what about the problem with GTX260/280 and those condensers? My mobo is revision 1.03G, anyone has this one with nvidia GTX 260/280? I´d like to conclude about which revisions are affected. Regards

Think it was early boards that were affected, they are all 1.03G revs... mine had 0506 bios on it and I could mount the GTX280 without an issue... maybe boards like BigJoe's, that one had 0302 bios on it, were the affected types...

Timings: 5-5-5-15 trfc 55
RAM Voltage: 1.94
DRAM Static Read Control: Enabled
DRAM Read Training: Auto
Mem OC Charger: Enabled --> this features enhances OC'ability
AI Clock Twister: Auto--> try moderate, if it passes okay if not light
AI Transaction Booster: Auto --> Try PL10 first then go lower step by step

I was also stable at 1.9v with Static Read Control disabled and everything else on atuo. I heard that enabling read control and mem oc charger helped boost perfomance. I tried setting AI Clock twister to Strong and that failed, what should I be doing here with the clock twister, transaction booster and read training??? Thanks

look above... hope you can make PL8...

@ namco - try to drop your vNB voltage, you shouldn't need 1.28v for those settings. I'm Orthos/OCCT etc stable at PL10, 333 strap and 534 FSB with only 1.2v vNB.

Remember he has 4 dimms , you have 2 (unless ya sig is incorrect), less stress on NB, with 2 x 2Gb dimms with 450FSB and 1081mhz I need 1.26 to be stable with them... and each board is different, so we can give guidelines but it's pretty hard to specify exact settings...