I'm posting this thread mostly so that it will be google'able in the future. I hope it helps some folks.
Before I bought my three Tieton's from Danger Den for my three EVGA GTX280s I searched for hours and was never able to know for sure whether the PCI slots near the edge and between the cards on a 780i or 790i motherboard were usable once you had the waterblocks installed. In other words, were three Tieton's truly a single slot solution?
The answer is yes, as long as you use either the aluminum or copper backplate instead of the default ramsinks. Both slots become usable, although the one in the middle is a squeeker. For a couple of extra bucks DD will supply you with the single slot dual DVI connector bracket.
Here are some photographs of my three Tietons shortly after assembly. I fetched my HT Omega Claro Plus+ sound card (awesome sound card by the way) and stuck it in the middle and the end PCI slots on my EVGA 790i motherboard.
The back of the sound card lightly touches the top of the waterblock when it's in the center slot where I'm going to place it, so I'll probably hot-glue a thin sheet of FR-4 fiberglass to the back of the sound card to prevent the screw heads on the waterblock from shorting the sound card out. On the edge PCI slot it didn't touch at all and I might not even insulate it there. However, in that slot it obscures your waterblock and why would you want to do that??
Anyhow. Danger Den Tieton's in tri-sli are a single slot solution for 780i and 790i motherboards and probably 680i as well. It works and I'm very happy.
EDGE SLOT --
MIDDLE SLOT --
BACKPLATES --
AtlasShrugged







Reply With Quote










Bookmarks