I was going to but my results are so good with the default bios i dont see the need right now.
Asus Z87 DeluxeDual/ i7 4770K @4.4Ghz /4x4 Gb Corsair Dominator 1866Mhz 9-9-9-24 1T/Intel 520 240Gb SSD /Samsung F3 1TB HD/MSI 680 Lightning / Corsair AX850 watt PSU/Thermalright Ultra Extreme 120/Samsung S23A950D 120Hz monitor/ Aurora 570 Case//Windows 7 64bit/AudioEngineA2 Speakers/Gigabyte Osmium Aivia Mechanical KB/ Gigabyte Krypton Mouse
I had to use a blow dryer and some towels on each side of the NB cooler to get it off, it was bonded with some kind of epoxy. Runs a ton cooler now and the 70mm fan I put on it blows good on the back of the 8800GTX. I feel like I cheated death doing this.
• LIAN-LI PC-A70B • ASUS P8P67 Deluxe Bios (1702) • i7-2600k @ 3.8 + Prolimatech Megahalems • Intel 510 120GB SSD SATA 111 • G.SKILL Ripjaws X Series 8GB DDR3 1600 •
• HIS 5850 Cooler V 1GB • PCP&C 750 Quad • ASUS 24X DVD+R - SATA • HT Omega Striker 7.1 • DELL 2209WA E-IPS • Windows 7 Pro x64 SP1 • Logitech Z5500 5.1 •
So happy with X38 and get back DDR3 on main rig ( bye bye X48 nightmare ) bios 1001
less than a day to get stable
with summer coming , just running 3.6ghz 1.11v
good bye BSOD, random reboots , IE7 freezes booting after express gate uuuhh and still able to go for crossfire 2 x 16 later
here are my settings if interrested
Ai tweaker = manuel
CPU ratio = 8.5
FSB strap = 400
FSB=424
DRAM = 1696
command rate = 2T
dram timing = 7-6-6-18
dram static read control = ENABLE
dram write control = auto
ai clock twister= lighter
ai clock skew A/B= auto
ai transaction booster=DISABLE
relax level = 1
cpu voltage =1.137
cpu PLL = 1.60
fsb termination voltage=1.12
dram voltage = 1.86
northbridge voltage = 1.31
SB voltage=auto
clock overcharging voltage = auto
load line calibration = enabled
cpu voltage reference= 0.62 ( oui curieux que j'aie pas le 0.61 dans le bios )
nb voltage reference = 0.61
cpu /pci spread spectrum = DISABLE
Last edited by Mykou; 07-06-2008 at 03:22 AM.
E8400@3.6ghz 1.11v |Asus P5E3 deluxe bios 1001| 2 giga Cellshock DDR3 12800@1696mhz|Samsung Syncmaster 2232BW 22' | Asus 8800 GTS² 512 TOP|Western digital sata 500 SE16 | Blu Ray LG GGW-H20LRB| Creative X-fi platinum|Nexus 600W | case Coolermaster 1000 "Storm"
Xeon E3110@3.6ghz 1.15v|Asus P5K premium "blackpearl" bios 503|2 gigas Cellshock DDR2 8500 |Twintech 9600 GT|nec 1970 GX|Gigabyte 3D aurora case
E8400(Q804A249) valid@ 4.8 ghz 1.56v
Xeon E3110 (Q746A534)valid@ 4.79 ghz 1.59v real bios AIR /superpi 1m@9.968 .. under vista
My Ibanez 540S " Saber "overclocked with Di Marzio and Sperzel
My cousin on drums Hi Brian !
Got the board above the 440Mhz barrier. X3350 is running at 3.54Ghz, 1.41 volts, rock solid stable. Couldn't post the OCCT and other PI run because the GF closed them down.
Time to do another run!
i7 965 Extreme Edition
XSPC Rasa 750 RS240 Universal CPU Water Cooling Kit
Asus P6T Deluxe V1
Corsair Dominator GT 1866
XFX Radeon 6970 2GB
WD 1TB Black
PCP&C Turbo-Cool 1200 SR
Samsung 503t
Can you please post your bios settings?
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
I swapped out the Intel stock cooler for a tt Blue Orb II I got here http://www.thermaltakeshop.com/ref/ref-cooler.html (great prices I use them alot as of late). I was nervous about removing the stock NB cooler so I just tightened down the screws abit and hoped for the best. The Blue Orb covers the first to dimms but with a little dexterity I can still remove them. After the base attatchments its easy to remove and reinstall without motherboard removal. I had errors plugging it into the cpu fan header so I just plugged it in to a molex w/adapter. Even at full speed I barely here it at all. My gpu runs louder. I just got a new digital camera to replace my stolen one, so i will shoot some beauty pics tommorrow.
Main Rig: Lone Frakker..
Q6600 GO@3ghz FSB333
P5E3 Deluxe/wifi FTW
2x1gb DDR3 Gskill 1333@8,8,8,24 1n
Sapphire HD2900xt
Pioneer 20x DVD burner IDE (to save SATA ports)
All air cooled
CPU cooler: tt Blue Orb II (wicked air cooler)
PSU: Hiper 580w Type R modular
Case: tt Bach VX w/window
Seagate 7200.11 500gb 32mb cache
Old rig: Gunslinger 1.0
Asus A8R32mvp Deluxe (Asus rocks)
Opteron 170@2.8ghz+
Sapphire x1900gt
Hard drives: Seagate 320gb 7200.11 16mb cache
Samsung DVD burner
Case: tt Aguila
CPU Cooler: lapped Arctic Freezer pro
PSU: Antec Smartpower 2.0 500w
I like zThermaltake, can't you tell?
No can do. Had to drop it back down to 3.2Ghz. Crashed after 13 hours of Prime95.
I'm going to lap the TRUE and all the heatsinks on the board, apply a rice spot of AS Ceramique on each contact point and retest.
My water cooling gear will be here within the next week so I should be able to push it at least back-up to where it was if not further.
i7 965 Extreme Edition
XSPC Rasa 750 RS240 Universal CPU Water Cooling Kit
Asus P6T Deluxe V1
Corsair Dominator GT 1866
XFX Radeon 6970 2GB
WD 1TB Black
PCP&C Turbo-Cool 1200 SR
Samsung 503t
425x8 is pretty easy 24/7 setup. All the extra BS involved and crazy voltages to get 200Mhz more is just dumb.
• LIAN-LI PC-A70B • ASUS P8P67 Deluxe Bios (1702) • i7-2600k @ 3.8 + Prolimatech Megahalems • Intel 510 120GB SSD SATA 111 • G.SKILL Ripjaws X Series 8GB DDR3 1600 •
• HIS 5850 Cooler V 1GB • PCP&C 750 Quad • ASUS 24X DVD+R - SATA • HT Omega Striker 7.1 • DELL 2209WA E-IPS • Windows 7 Pro x64 SP1 • Logitech Z5500 5.1 •
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
• LIAN-LI PC-A70B • ASUS P8P67 Deluxe Bios (1702) • i7-2600k @ 3.8 + Prolimatech Megahalems • Intel 510 120GB SSD SATA 111 • G.SKILL Ripjaws X Series 8GB DDR3 1600 •
• HIS 5850 Cooler V 1GB • PCP&C 750 Quad • ASUS 24X DVD+R - SATA • HT Omega Striker 7.1 • DELL 2209WA E-IPS • Windows 7 Pro x64 SP1 • Logitech Z5500 5.1 •
The only thing I have found to be gimped around this board is it's owners!!!!!!!!
Here it is 95 degrees here today and even though I am water cooled I have had to turn it al the way down to the 4600MHZ range to bench.
good grief.. 65 pages of mostly whining but.....if you read close you would have maybe learned how to get the most from your systems.
you don't need to flash it to something else. you need to put together the right pieces as with anyboard. If you put parts together that weon't blend to give you the best chance for speed
that is NOT the board's fault!! I suggest you sell the damn thing. And start putting the wrong parts on some other system to about.
Yeah benching at these sucky speeds is a real .
Damn this miserable board!!
WZ
Last edited by WeldZilla; 07-12-2008 at 08:11 PM.
Has anyone used/tried the "new" 702 BIOS? Any major changes? Currently planning on getting a E7200 to replace my E6420:P
WeldZilla, I am talking about the 45nm quad ( Q9450 X3350 ) and the 450 fsb wall. Now if you can get either of those quads to 450 and over on a P5E board I will say I am sorry to you the Zilla dude.
• LIAN-LI PC-A70B • ASUS P8P67 Deluxe Bios (1702) • i7-2600k @ 3.8 + Prolimatech Megahalems • Intel 510 120GB SSD SATA 111 • G.SKILL Ripjaws X Series 8GB DDR3 1600 •
• HIS 5850 Cooler V 1GB • PCP&C 750 Quad • ASUS 24X DVD+R - SATA • HT Omega Striker 7.1 • DELL 2209WA E-IPS • Windows 7 Pro x64 SP1 • Logitech Z5500 5.1 •
Just wondering for a friend - Can you flash the P5E Deluxe to the Rampage bios? or does it only work on the P5E?
| i7 860 | EVGA P55 FTW | 2* HD5850 | HX-620 | Lian Li v2010b | 2 Samsung F1 640gb |TRUE | 4gb G.Skill RipJaws 2000mhz cas9 | Dell E248WFP *2 + Dell 2405FPW |
Rampage bios's work fine, even gain better mem bandwidth.....
X299X Aorus Master
I9 10920x
32gb Crucial Ballistix DDR4-4000
EVGA 2070 Super x2
Samsung 960 EVO 500GB
4 512gb Silicon Power NVME
4 480 Adata SSD
2 1tb HGST 7200rpm 2.5 drives
X-Fi Titanium
1200 watt Lepa
Custom water-cooled View 51TG
Does anyone know if the P5E3 Deluxe Wifi is more stable than the Premium Variant? Also, does the Deluxe work well with the OCZ 1600Mhz Platinum 2x2GB RAM?
I haven't looked in a while, but has Asus released a BIOS yet that fixes that damn 4:5 memory divider on the P5E? Just about everything after 107 seems to be giving my 2x2Gb G.Skill PC8000 kit a major headache. I'm running a Q6600 at 400x9, and the 4:5 divider flat out refuses to POST, the 5:6 divider (960 MHz) doesn't even pass memtest at 2.1v (this is with all timings and the FSB strap on Auto, 1.45v on the NB, and all other voltages up a notch). But it'll do 1:1 at 1.8v all day long, so I don't think the RAM is bad.
So am I missing some setting or other, or what? I'm currently using 605, if that makes any difference.
Eller
Desktop: Q6600 G0 @ 3.6 Ghz | P5E | 2x2 Gb G.Skill PC8000 | GTX 560 Ti | CM690 | TT TP 750 watt | Win 7 Pro x64 | Water Cooling
Server: i3 530 (Stock) | CM Vortex Low-Profile | Zotac H55-ITX WIFI | 2x2Gb Corsair 1333Mhz | IGP | VX450 | Server 2008 R2 x64
I had 4:5 and 5:6 working with Q6600 with bios 502 without too much tweaking.
ASUS P5E X38 (RF 0701 Bios) Q9550@3.51 1.248v, Xigmatek S1283, 8GB GSkill DDR2-8000@990 1.94v, XFX HD5870,
2 - Seagate 7200.10 320G RAID0, Seagate 7200.11 500G, Seagate 7200.12 1.5TB
Lian-Li (Rocketfish) Full Tower, Silverstone Zeus 750Watt, Vista Ultimate x64 SP1, Dell U2410
CPU: INTEL Q9550 E0 @ 3600 1.28V + CORSAIR H50
GPU: EVGA GTX 480 @ 725/1450/3800
PPU: EVGA 9800GTX @ 738/1836/2250
MB: ASUS P5E X38
RAM: MUSHKIN 2X2GB
SOUND: X-FI TITANIUM FATAL1TY | LOGITECH Z-5500 | LOGITECH G35
HDD: WD 76GB X 2 RAPTORS RAID 0 10KRPM | WD 1TB CAVIAR BLACK 32MB STORAGE
PSU: CORSAIR HX1000W PSU
OS: WINDOWS 7 PRO X64 OS
MON: HANNSPREE 28" 1920X1200 RESOLUTION
Hey guys, quick question about ram upgrade:
I'm looking for a good set of DDR2 1066mhz (4GB) that can overclock to 1200mhz - either 2x2gb or 4x1 gb kits for vista 64 bit running on Asus P5E
I was looking at g skill 2x2gb kit (1066), can this be overclocked to 1200 mhz?
OR, whats the best 1066 or 1200 4 gb kit for my asus p5e on vista 64 ?
Thanks
Ok riddle me this gentlemen.. So I build a new system using a p5e. I installed a q6600, overclocked to 3.2ghz from 2.4ghz. I stablilty tested the system for 3 days using occt, prime, memtest blah blah. stable as could be. I packed up the system and dropped it off at a friends house. I started the pc up and its booting at 2.4ghz. I go into the bios and the fsb freq is set at 356 which gives me 3.2ghz. I reboot and it still posts at 2.4ghz. Even in windows it shows 2.4ghz. Any fsb I move it do even below the stock 266mhz, it still shows 2.4ghz. I can change the ram speed and that stays but not the fsb. I cleared the bios but didnt have a chance to install version 702 again. Anyone have any idea why this does this or how to fix it?
thanks
Main Rig: Lone Frakker..
Q6600 GO@3ghz FSB333
P5E3 Deluxe/wifi FTW
2x1gb DDR3 Gskill 1333@8,8,8,24 1n
Sapphire HD2900xt
Pioneer 20x DVD burner IDE (to save SATA ports)
All air cooled
CPU cooler: tt Blue Orb II (wicked air cooler)
PSU: Hiper 580w Type R modular
Case: tt Bach VX w/window
Seagate 7200.11 500gb 32mb cache
Old rig: Gunslinger 1.0
Asus A8R32mvp Deluxe (Asus rocks)
Opteron 170@2.8ghz+
Sapphire x1900gt
Hard drives: Seagate 320gb 7200.11 16mb cache
Samsung DVD burner
Case: tt Aguila
CPU Cooler: lapped Arctic Freezer pro
PSU: Antec Smartpower 2.0 500w
I like zThermaltake, can't you tell?
tried that already and no change. Even if i try to underclock it, it still stays at 2.4ghz.. this is odd since it was working just fine before the car ride to a differnt house..
flashed my p5e to the 403 rampage bios today and upon restart it is dead, no post at all , nothing , fans run but monitor is blank (no signal) , has any one got a solution to overcome this problem?, i have cleared cmos, removed battery , stripped the board bare, still nothing. any help would be much appreciated. cheers
Q6600
P5E 1.03G/RAMPAGE 403
2X1G OCZ 1066 REAPERS
GAINWARD 8800GT 1G GS
HYPER 580W/MEANWELL 320W
D-TEK BLOCK,MCP655,MCR220-QP
MICRO-RES,1/2" TUBE
Bookmarks