**Unified** DFI LanParty UT 790FX-M2R-M2RS / Phenom /Data Base Thread**

[justapost]

should be same consumption i think?

I expected higher amp requirements due to a higher TDP(16%) at an equal voltage with just an 4% frequency increase.

btw, did the pwm-watercooler arrive?

Yepp I rasped the longer side down ~1-2mm and now it fit's. Did not adjust the length so i have a ~5-10mm overhang.
I did not yet connect it to the watercooling because i want to test the 9950be in the m3a with that wc.

[Oese]

isnt power consumption 2nd order to frequency and voltage?

nice please dont forget pictures if finished

[Final8ty]

Hmm 533MHz * 216/200 = 1151,28MHz

Yep & highly unstable even with max 2.3v & timings as loose as the bois would go on everything but is stable at 1066 5,5,5,16 on 1.90v

[RobPuba]

I RMA my current MB and was thinking about getting the DFI Lanparty UT 790FX-M2R. I've notice the CPU socket is real close to the Ram, the ram I have is tall (Look in my signature). I'll also will be getting the 9950, what heatsink will fit

[RobPuba]

BUMP Now somebody should want to answer my question....

[Brother Esau]

The Tuniq 120 just makes it with the Reapers and I mean barely The Zalman 9700 fits fine even with OCZ Flex

[SocketMan]

BUMP Now somebody should want to answer my question....

Got Enzotech's "EXTREME-X"(ultraX)
it has the pipes facing the other way
plus it blows air on the ram

http://www.ncix.com/products/index.p...cture=EnzoTech

[ea6gka]

i am getting some very poor performance with the sil3132...could somebody post a hdtach????

[Oese]

i think is ok for a single hdd..

[Oliverda]

I replaced my 9850BE with a 9950BE. The 9850 was stable at 3.0Ghz@1.32V but it could not boot up over 3.2GHz. Strange but the 9950 needs 1.36V for prime stable operation at 3.0GHz but it able to boot up even at 3.4GHz@1.5V.

I got this CPU inside the box:



The CPU is exactly the same (except the last 3 digits in the SN) with that 9950 which appeared in the first Greek 9950 review. They were able to get 3535Mhz@1.475V in a MSI K9A2 Platinum(!!). After that I found a Japanese guy who has also the same CPU (except the last 3 digits) and he was able to get 3503MHz@1.45 in an ASUS M3A32-MVP Deluxe and PI stable 3209MHz@1.30V.

I have to say that something really wrong with the DFI LP UT 790FX-M2R + 9950BE pair. I use the latest 612 beta BIOS but I've already tried the latest final as well.

I can't wait for the SB750 boards... I'm going to throw out this board through the window. It has given me much headache since december...

[ea6gka]

i have noticed that c&q does not work as it was supposed to with Phenoms , phenom have 5 p-states "k8 c&q" have only 2

so i checked cpuz and saw that the phenom downclocks from 13X to 6.5X and thats it....this is NOT c&q 2.0...wth????

[justapost]

i have noticed that c&q does not work as it was supposed to with Phenoms , phenom have 5 p-states "k8 c&q" have only 2

so i checked cpuz and saw that the phenom downclocks from 13X to 6.5X and thats it....this is NOT c&q 2.0...wth????

As far as i know phenom uses only two p-states and barcelonas use all five. Both have five registers per core for the p-states.

I run it at 15x & 3.75x atm.

@informal: sry have not had time to test m3a this weekend.

[imamage]

I RMA my current MB and was thinking about getting the DFI Lanparty UT 790FX-M2R. I've notice the CPU socket is real close to the Ram, the ram I have is tall (Look in my signature). I'll also will be getting the 9950, what heatsink will fit

I am using Ultra 120 Extreme with my Crucial / Team Combo RAM
The heatsink of the RAM barely missed the CPU heatsink
(Sorry for the HD3870 blocking the view & messy case ...)

[imamage]

i am getting some very poor performance with the sil3132...could somebody post a hdtach????

Here you go
That was my old setup (RAID 0) with a pair of WD 160GB SATA Hard Drive

The performance chart is odd as it's the OS Drive

[imamage]

Just a quick question
Should I go for tighter RAM Timing ( DDR2-800 CL4-4-4-12) or go for high frequency (DDR2-1120 CL5-5-5-18)
I want better performance in-game

Thank you

[Oese]

high freq..

wtf is that black blower thingy over the rams between drives and cooler ????

[Brother Esau]

high freq..

wtf is that black blower thingy over the rams between drives and cooler ????

Olli that Black Blower thing is what looks like the the exhaust Fan of a Hot swap Super Micro Drive Cage or a Adaptech Hot Swap Drive Cage more then likely seeing how it does not look like he Rear of my Super Micro Hot Swap Drive Cages

[Oese]

a-ha didnt know such thing exists

besides i see there're MANY drives in that case

[ea6gka]

Here you go
That was my old setup (RAID 0) with a pair of WD 160GB SATA Hard Drive

The performance chart is odd as it's the OS Drive

it sucks

[Brother Esau]

a-ha didnt know such thing exists

besides i see there're MANY drives in that case

WHOOOOPS Upon closer look that is a Antec Spot Cool not the Backplane Fan of a Hot Swap Cage

[Oese]

didnt know that SUCH thing exist either

you'll always learn..

[Brother Esau]

Announcement:..........Well I have Spoken with RGone and asked if there is a Beta Bios Candidate up and coming for the 790FX-M2R Board for me to test for Phenom 9950BE support and this is his [QUOTE]..

Oskar is not fooling with that bios at all is how I understand it and the Bios R&D has sent out no word yet.

So if this is indeed the case can any of you that have this Board and a Phenom 9950BE or plans of buying the Processor to use in Conjunction with the D.F.I LanParty UT 790FX-M2R ....Please Report in and let me know whats up with the Phenom 9950BE and the Current Official 5/5/2008 Bios???

This is important that some of you touch base with me on this and let me know if there are issues with Current Bios with the Phenom 9950BE and this Board and I will inform RGONE and in return he will pass this on to D.F.I Taiwan

[RobPuba]

I am using Ultra 120 Extreme with my Crucial / Team Combo RAM
The heatsink of the RAM barely missed the CPU heatsink
(Sorry for the HD3870 blocking the view & messy case ...)

The ram I have is taller, because of the heatsink........
Anybody using the with the D.F.I LanParty UT 790FX-M2R ?

[SocketMan]

Is "AMD cpu stepping" P0 for B2 and P1 for b3 ?

[Oese]

Guys I did IT!

Oese presents Phenom HTT clocking @ phenom 9750 @ vista64bit @ 790FX-M2R

believe it or not this is the first try