hello all,

finely i manage to get 9*400=3600GHz stable 24/7 OCCT 2.0+PRIME95.
but now i stock even if i rise 1MHz more, the board give me "DET RAM"/"VGA BIOS" errors.

BIOS 1102
-Ai overclock tune = manual
-OC mem lev up= auto
-cpu ratio set= 9.0
-FSB frecv= 400
-pci frecv= 105

-ddram frecv = ddr1066mhz
-ddram command rate = 2t
-ddram timing control= manual
-cash# latency = 5
-ras# to cas# latency =5
-ras# precharge = 5
-ras# active time=15
-ras# to ras# delay = auto
-row refresh cycle time = auto
-write ricovery time = auto
-read to precharge time = auto
-read to write delay (s/d)= auto
-write to read delay (s)= auto
-write to read delay (d)= auto
-read to read delay (s)= auto
-read to read delay(d)= auto
-write to write delay (s)= auto
-write to write delay (d)= auto
-ddram static read control = disable
-dram dynamic write control= disable
-Ai clock twister = light
-Ai transaction booster = disable
-relax level=0

-Cpu voltage 1.55625v (CPU-Z read 1.536)
-cpu ppl voltage = 1.60v
-north bridge voltage= 1.51v
-ddram voltage = 2.12v
-Fsb termination voltage= 1.53v
-south bridge = AUTO
-Loadline calibration = enable
-Cpu gtl reference= x63
-north bridge gtl reference = x67
-ddr3 chanel A+B REF voltage = auto
-ddr3 controller REF voltage = ddr3_REF
-sb 1.5 voltage = auto

offer someone ?