Originally Posted by RealTelstar
Yes, all nv 680i mobos support all raid pci-e cards.u mean nv did something right with that chipset!!??
Yes, all nv 680i mobos support all raid pci-e cards.
DNA = Design Not Accident
DNA = Darwin Not Accurate
heatware / ebay
HARDWARE I only own Xeons, Extreme Editions & Lian Li's
https://prism-break.org/
Yeah, they are not picky with raid cards.
Actually all nv chipsets as far as i know.
SB Rig:
| CPU: 2600K (L040B313T) | Cooling: H100 with 2x AP29 | Motherboard: Asrock P67 Extreme4 Gen3
| RAM: 8GB Corsair Vengeance 1866 | Video: MSI gtx570 TF III
| SSD: Crucial M4 128GB fw009 | HDDs: 2x GP 2TB, 2x Samsung F4 2TB
| Audio: Cantatis Overture & Denon D7000 headphones | Case: Lian-Li T60 bench table
| PSU: Seasonic X650 | Display: Samsung 2693HM 25,5"
| OS: Windows7 Ultimate x64 SP1
+Fanless Music Rig: | E5200 @0.9V
+General surfing PC on sale | E8400 @4Ghz
anyone know if the Dell PERC5 will work in a DFI nF4 (s939) mobo? or any other nF4 mobo for that matter?
Last edited by tiro_uspsss; 07-19-2008 at 03:08 AM.
DNA = Design Not Accident
DNA = Darwin Not Accurate
heatware / ebay
HARDWARE I only own Xeons, Extreme Editions & Lian Li's
https://prism-break.org/
According to the Perc5 thread in the German HWluxx forums, yes.
I had a Perc4E in an Ultra-D in the second PCI-E slot when I ran that board and it ran great.
I have just changed boards to the LP LT P35 T2R and my Perc4E card is doing just fine in the 2nd x16 slot running at 4x.
Larry
Q9650
Asus P5Q-D Bios 1406
280 GTX FC Block
2x2gb OCZ Flex II PC2 9200
Water Cooled/ Iwaki MD20/ D-Tek Fuzion
XFX 850 Watt
OWC SSD
thank u muchly, to both of u gentlemen!
DNA = Design Not Accident
DNA = Darwin Not Accurate
heatware / ebay
HARDWARE I only own Xeons, Extreme Editions & Lian Li's
https://prism-break.org/
will update first post soon
SB Rig:
| CPU: 2600K (L040B313T) | Cooling: H100 with 2x AP29 | Motherboard: Asrock P67 Extreme4 Gen3
| RAM: 8GB Corsair Vengeance 1866 | Video: MSI gtx570 TF III
| SSD: Crucial M4 128GB fw009 | HDDs: 2x GP 2TB, 2x Samsung F4 2TB
| Audio: Cantatis Overture & Denon D7000 headphones | Case: Lian-Li T60 bench table
| PSU: Seasonic X650 | Display: Samsung 2693HM 25,5"
| OS: Windows7 Ultimate x64 SP1
+Fanless Music Rig: | E5200 @0.9V
+General surfing PC on sale | E8400 @4Ghz
did you look at this thread?
http://www.xtremesystems.org/forums/...d.php?t=164419
Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card
LSI series raid controller
SSDs: Crucial C300 256GB
Standard drives: Seagate ST32000641AS & WD 1TB black
OSes: Linux and Windows x64
Thanks, no i didnt.
SB Rig:
| CPU: 2600K (L040B313T) | Cooling: H100 with 2x AP29 | Motherboard: Asrock P67 Extreme4 Gen3
| RAM: 8GB Corsair Vengeance 1866 | Video: MSI gtx570 TF III
| SSD: Crucial M4 128GB fw009 | HDDs: 2x GP 2TB, 2x Samsung F4 2TB
| Audio: Cantatis Overture & Denon D7000 headphones | Case: Lian-Li T60 bench table
| PSU: Seasonic X650 | Display: Samsung 2693HM 25,5"
| OS: Windows7 Ultimate x64 SP1
+Fanless Music Rig: | E5200 @0.9V
+General surfing PC on sale | E8400 @4Ghz
I run an Adaptec 5805 with 6x WDC Caviar RE2-GP 1TB drives in RAID-6 on an Asus Z7S WS without problems at all. The controller sits in the first pci-e x16 slot (which is not usable for a full length graphics card though) but works in the second pcie-x16 and the pcie-x8 slot as well.
As mentioned by jcool above: Its an Intel i5400 'Seaburg' chipset and dual-socket 771 XEON.
Where to tape the pin on B1 or B2 and can i use this with lsi 8888elp
Posting Permissions
Reply With Quote
Bookmarks