32m SPi Low Clock Challenge

[youngpro]

im very proud to finally get a time worth posting here

biostar tpower p45
crucial ballistix 8500 pushing cas4 at 600mhz, allows me to hit pl=9 also
maxmem 512, pagefile 512, spi tweaker, all the tweaks i know hehe

[monteboy]

@youngpro

great time m8.
Waza settings ?

[Gautam]

WTG James, just back down 4 MHz and you'll officially displace hipro. Now imagine a setup like that paired with DDR3 at 1000 CAS 7.

[dinos22]

i am not as efficient as pro but very close anyways
gotta work on it some more

11.xx category

[gandalfone]

I Haven't word...The P45 born now

[youngpro]

ill try rerun tonight at sub 3600mhz see how it goes,

well waza i used 1024kb size and 512mb waza size to match my swapfile and maxmem value

[dinos22]

ill try rerun tonight at sub 3600mhz see how it goes,

well waza i used 1024kb size and 512mb waza size to match my swapfile and maxmem value

i tried that
my time was a bit slower lol
i set my pagefile to 512-512 on an unrelated partition to OS/Pi

[youngpro]

man i cant keep up with 3oh6, that guys blazing, this is my entries into the low clock challenge

my efficiency is embarassing for 8.xx category so i wont enter =p

11.xx


10.xx


9.xx

[gbglassen]

10.xx
DFI LP P35
Corsair PC8888 C4 2.68V
E8500
5:6 divider 539/647

[3oh6]

wow, you guys have been tearing it up, huge update done!

@youngpro...it is very nice to see you here and what a way to kick off your low clock career, nice work on toppling Hipro and Kielbasa Squad. oh, and your just using the wrong chipset if you want to catch me

@gbglassen...with clocks and memory like that, your time should be much lower. do some hunting for SPi tweaks and you will be giving that time slot a run for its money

@Kielbasa Squad...awesome stuff as always and yes, competing with this 790i without ridiculous FSB is all but a futile effort...E8x00 FTW

E8400 (Q808A476) 9 x 559 (boot at 550*9)
CU Mousepot Rev3 w/dry ice
EVGA 790i SLI Ultra (P05)
Swiftech MCW30/PA 120.2/DD5 // Thermalright HR-05-SLI (SPP // MCP cooling)
G.Skill F3-12800CL7D-2GBHZ
HIS HD3870X2 (no drivers)
Seagate 7200.9 80GB SATA2 (10GB partition for OS/SPi)
ERAM v2.11 (transfer CW file to & page file)
Silverstone Zues ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)

realtime / core 1
maxmem = 630
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = 300MB/300MB Z:
plenty of services disabled but not all

5031.2MHz SPi 32M = 8m 59.640s
click for full size including memset...

[sobih25]

i'll never even touch spi on nvidia based chipset mb, for sure . nvidia don't likes me even more than i hate it .

wait for rma'ed p5e3 premium now... i'll try again play a bit with fsb and x48.

you're lowclock spi king 3oh6

[Gautam]

Daaamn you got G.Skills that can do 1100 too??? Stop hogging all the good stuff.

P.S. I intend to return to this thread whenever I get my hands on suitable hardware.

[3oh6]

you're lowclock spi king 3oh6

won't get you higher up on the list

Daaamn you got G.Skills that can do 1100 too??? Stop hogging all the good stuff.

from my cold dead hands my friend...from my cold dead hands

[sobih25]

won't get you higher up on the list

freak

[George_o/c]

Nice work Jody

Daaamn you got G.Skills that can do 1100 too??? Stop hogging all the good stuff.

I'm afraid I have to agree with Gautam on that ...

[3oh6]

Nice work Jody

I'm afraid I have to agree with Gautam on that ...

as always, thatnks George, but i put in my time with duds before getting these two kits...but i have to agree. everything this 790i touches lately seems to do 1100MHz+ relatively stable. if only it would do the 595FSB+ that others seem to be doing with un-modded boards and stock cooling. i guess i can't have everything.

oh, and the above slot can be improved i think. looking at the read bandwidth i realized i should be able to get that about 400MB/s faster at the exact same clocks. hopefully that will equate to 1 or 2 FSB lower...we'll see shortly

[George_o/c]

So are we going to see a review of those G.Skill you used Jody ?
Looks like D9JNL, or what ?
Let me tell you something; I really start to like those CL 8 runs of yours Seems like in low clock challenge, it's unbeatable ... (am I right ? )

[3oh6]

So are we going to see a review of those G.Skill you used Jody ?
Looks like D9JNL, or what ?
Let me tell you something; I really start to like those CL 8 runs of yours Seems like in low clock challenge, it's unbeatable ... (am I right ? )

this is the same kit from the 15K Everest thread and as mentioned there a few times, are D9GTR. i likely won't be doing a OC Report of this kit as it really isn't available anymore with these ICs. if i have time, or more importantly the 790i has time, i will put one together. but it is unlikely as that motherboard is a busy bee with newer kits coming in every week it seems.

as for CL8 at 1100MHz being unbeatable, i wouldn't say that as 1000MHz 7-6-5 comes awfully close and at certain clocks i am sure it will come out on top. the P5E3-Premium at or over 500FSB PL6 at 7-6-5 is also a monster but you are limited to the time zones a little bit more with that setup.

[gbglassen]

@3oh6 Very nice 8m run there! About my 10m run, I know the time kinda sux, but no matter what I tried I couldnt get any lower. I tried alot of different maxmem and Copy waza sizes, tried spi folder in different partitions and on different Hdds but nothing helped Havent tried Eram though.
Anyways, my cascade has very recently been rebuilt by Tim, and yesterday i fired it up just to try it out. I did a quick test at 538*9,5 on a TOTALLY unoptimezed XP SP3 installation just to test stability, (I was even installing other programs meanwhile heh) and the time was 9m 22s so I will give the 8m time slot a chance instead

[Harshal]

Nice show down you guys.
I think I will try my best with what I got. Warning tho I am way off on OS tweaking for Pi... so dont laugh

EDIT:
Ok I found one near 3.6G on BlackOps with VISTA
12:39:112


Next round I try with XP!

[George_o/c]

this is the same kit from the 15K Everest thread and as mentioned there a few times, are D9GTR. i likely won't be doing a OC Report of this kit as it really isn't available anymore with these ICs. if i have time, or more importantly the 790i has time, i will put one together. but it is unlikely as that motherboard is a busy bee with newer kits coming in every week it seems.

Oh, I'm sorry Jody I completely forgot about that magnificent G.Skill D9GTR kit and the 15K everest achievement So just like you said, no need to review that kit ... I actually think that only some of 'em were equipped with GTRs ... I mean, there wasn't a specific period of time that G.Skill brought this kit to the users equipped with GTRs (specific batch), but only some of the kits (for example I know 3 guys with a JNLs, but hipro has a GTR kit ...)

Newer kits on the way huh ? I hope that all of 'em are capable of doing 1100+ MHz

[Harshal]

This is what I got with XP [Not tweaked].

have NOT used maxmem. Need some pointers there.

Thanks you!!
Harshal

[3oh6]

hey Harshal, thanks for posting but your a bit off in the goal. we are not trying to get the best time at a said frequency, we are trying to get a said time with the lowest frequency possible. the goal for your above time zone should be 12m 59.xxxs at as low a clock as possible.

[Harshal]

hehe ok... dat means more hard work for me

Well its a start for me. I shall try and improve from here as you mentioned

EDIT:
This is tough man... but I am close to it.

[Harshal]

Finally.. I got something in 12:XX:XX. But I had to bump speed up a lil


11X and 10X in works.. hope to get it with lowest possible clocks [with MARS].

EDIT: Thanks to my friends Andre_X_X and Pro for guiding me with this