Sub 100seconds @ modPi 8M by Team Japan

[NewBeetle]

I forgot to try PiFast and 4M because of gladness.....

modPI 8M : 1m39.984s @5985.0MHz (FSB630.0MHz x 9.5)


Setup
M/B: BIOSTAR TP45 HP Ver.5.0 Vcore-mod (BIOS:P45BA624.BST)
M/B Bed: V-TEC ARC Bed Rev.5.3
CPU:Core2 Duo E8500 Q813A227#1(2V81209)
CPU cooling:MaxxNeo + LN2 / Temp:-140C
Chipset Cooling: Tara-chan 1st + LN2 / Temp:-50C
Mem:Team PC2-8500 C4 1GB x2
VGA:MSI NX7900GTO 512MB PCI-EX
HDD:Maxtor 6Y080P0 (IDE)
PSU: SilverStone OP1200
OS: Windows Server 2003
Tools: SetFSB / Memset3.5 / P965StrapTweaker(04-10-03-22-08) / ERAM2.11 / AutoGear

[BIOS SETUP]　O.N.E
Over-Clocking Navigator [Manual OverClock]
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×8
CPU Frequency Setting : 570
Over Clock Retry Count : 2
FSB(Bsel) To NorthBridge Latch : AUTO
DRAM Frequency : DDR2-1140
DDR2 Enhance Mode : Enabled

DRAM Timing Configuration
DDR2 RCOMP Configuration : Configuration 4
Static tREAD Value : Auto
Configure DRAM Timing by SPD : Disabled (4-4-4-10-6-26-4-4-4)

Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 200ps
(G)MCH Clock Skew Control : 100ps
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : +0.6250v (Actual:1.94V)
DDR Voltage : +0.700v (Actual:2.67V)
Chipset Voltage : +0.350v
FSB Voltage : +0.350v
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.63*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.6v

[eva2000]

wow congrats NB !

[Charles Wirth]

nioce push Newbeetle-san, love to see some 3D at that speed.

[NewBeetle]

wow congrats NB !

Thank you always, eva2000-san.

nioce push Newbeetle-san, love to see some 3D at that speed.

Thank you so much, FUGGER-san.
I will show you some 3D at this speed in a few days.

DEWA DEWA
NewBeetle

[ataruz]

congrats. New Beetle

[ZoLKoRn]

Congrats Team Japan always nice results

can't wait to see you playing on new chip with E8600

[gandalfone]

Great newbeetle
Very nice score

Congratz

[overcrash]

Really nice score ! Can we see some 32M 6 Ghz Action

[Bullet92]

Congrats on the WR and I hope you'll keep benching 8M with E8600 in the feature. Seems that this month is month of WR's although is very warm outside.

[Harshal]

Congrats NB-san
You always keep most of us charged to push some more

[NewBeetle]

congrats. New Beetle

Thank you, ataruz-san.

Congrats Team Japan always nice results

can't wait to see you playing on new chip with E8600

Thank you always, ZoLKoRn-san.
I also can't wait to play E8600.

Great newbeetle
Very nice score

Congratz

Thank you so much, gandalfone-san.
You made me hard motivation.

Really nice score ! Can we see some 32M 6 Ghz Action

Thank you so much, overcrash-san.
Someone will show you 32M 6GHz Action near future.

Congrats on the WR and I hope you'll keep benching 8M with E8600 in the feature. Seems that this month is month of WR's although is very warm outside.

Thank you, Bullet92-san.
Today is very very hot in Japan!
But I love LN2 session these hot days.

Congrats NB-san
You always keep most of us charged to push some more

Thank you so much, harshal-san.
I am also charged by all XS members.

DEWA DEWA
NewBeetle

[nachthymnen]

Awesome run NB-san!

But don't you think it's time to put an E8600 under your pot?
I can't imagine an 8M @ 6.1+Ghz

[gandalfone]

Thank you so much, gandalfone-san.
You made me hard motivation.

And You made me hard hard motivation...but I'm stop bench for some time...Now I look you master

[I34z1k]

So close to 6ghz man

Can't wait to see what you can achieve with a E8600

[CAL930]

congrats NB

omedetougozaimasu!!!

[NewBeetle]

Awesome run NB-san!

But don't you think it's time to put an E8600 under your pot?
I can't imagine an 8M @ 6.1+Ghz

Thank you always, nachthymnen-san.
At last, Futto-kun gets 6.5GHz E8500.
I think he can run an 8M @ 6.2GHz.....

And You made me hard hard motivation...but I'm stop bench for some time...Now I look you master

So close to 6ghz man

Can't wait to see what you can achieve with a E8600

Thank you always, I34z1k-san.
We cannot buy E8600 until August 10th in Japan.....
I will keep looking for better E8500.

congrats NB

omedetougozaimasu!!!

Thank you so much, CAL930-san!!!!!

Domo Arigatougozaimasu.

DEWA DEWA
NewBeetle

[Gautam]

Thank you always, I34z1k-san.
We cannot buy E8600 until August 10th in Japan.....
I will keep looking for better E8500.

You're inspiring me to continue benching E8500 as well, NB-san. Only you would have the courage to stand against the yet to be released E8600 with the currently available E8500.

Congratulations on the sub-1:40 mark, a wonderful milestone.

P.S. Does Futto-Kun have any screenshots which you could share?

[I34z1k]

Well that's less than one month

Now you have some time to join the 7min club

[PcCI2iminal]

a great post like always

congrats NewBeetle-san

[OC_Windforce]

Really nice~.
Good recording always becomes good information to me to you.

[LardArse]

NB san! i see after visiting kyoto with you and CAL san, you returned home to bench again
congrats, wonderful pi run

[NewBeetle]

You're inspiring me to continue benching E8500 as well, NB-san. Only you would have the courage to stand against the yet to be released E8600 with the currently available E8500.

Congratulations on the sub-1:40 mark, a wonderful milestone.

P.S. Does Futto-Kun have any screenshots which you could share?

Thank you so much, Gautam-san.
Now I start 4870 CF 3D Bench.

And futto-kun's ss are here.
E8500 WR
His 1M
His 8M

Well that's less than one month

Now you have some time to join the 7min club

This weekend I will try 32M.

a great post like always

congrats NewBeetle-san

Thank you always, PcCI2iminal-san.

Really nice~.
Good recording always becomes good information to me to you.

Thank you so much, OC_Windforce-san.
Please enjoy "AOCC"!

NB san! i see after visiting kyoto with you and CAL san, you returned home to bench again
congrats, wonderful pi run

Thank you so much, LardArse-san.
And how are you in kyoto?
As Japan is so hot these days, I played with LN2 to cool my body.

DEWA DEWA
NewBeetle

[gandalfone]

Good Luck for 32m

NewBeetle but....mmm..(private information)..What size waza do you use for spi8m? I tried 600Mb and no good, Than I used a waza like 32m good, 1.5Gb

Thx

[NewBeetle]

Good Luck for 32m

NewBeetle but....mmm..(private information)..What size waza do you use for spi8m? I tried 600Mb and no good, Than I used a waza like 32m good, 1.5Gb

Thx

Thank you so much, gandalfone-san.
I used about 550MB copy waza for spi8m(sub 100s).
And I used 1.11G copy waza for this 32M run.
If I have more good tweaks like you, I might take sub 8min.....

modPI 32M : 08m04.390s @5970.2MHz (FSB628.4MHz x 9.5)


Setup is almost the same 8M run.

DEWA DEWA
NewBeetle

[FatAlbert]

Nice score NB-san

when you will try beat 32m wr ?

is biosty can do this ?