Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
oki, where did you posted ?
.. ok, just below! 'Must look better....
Last edited by ToyTen; 07-08-2008 at 09:25 AM.
DiKKeneK fan !!
i just got a new kit which has JNM chips. i am really curious how they clock.
http://www.newegg.com/Product/Produc...82E16820231142
i'll be buying this pair incredibly soon for my asus p5e3 deluxe... what is the worst case scenario ic i should be looking at??
Cpu: Intel Core i7 920 @ 3.9 ghz (cooled w/ Apogee GTZ)
Mobo: Gigabyte EX58 UD5
Ram: G.SKill 3x1 GB DDR3 1600
GPU: GTX 280
PSU: E Power 1000 Watt
cpu runnin kinda hot there? but nice clock for such a low vcore
Cpu: Intel Core i7 920 @ 3.9 ghz (cooled w/ Apogee GTZ)
Mobo: Gigabyte EX58 UD5
Ram: G.SKill 3x1 GB DDR3 1600
GPU: GTX 280
PSU: E Power 1000 Watt
Well...perhaps I should try...
I just got this G.Skill from the Egg, and it is weird, very weird...
It is probably JNM, but it's more capable than the 7 sets of GTR that I've tried...at least at first glance. It will barely make it into windows at 7-6-6 or 7-7-7-18, but will BSOD almost instantly, even at "low" speeds like 970 etc. 7-7-6-21 apparently is what it likes, so it's what it gets. Yes, 7-7-6, not 7-7-7, it loses nothing by dropping tRP down to 6.
And, it SUCKS at low voltages. My heart was sinking as I was initially testing it, as it struggled to pull off even 900 with 1.95v. The more it gets though, the merrier. 2.17v actual will put it at about 1000-1010 almost fully stable. I had the nerve tonight to give it a little more to squeeze what I could. This is 2.25v BIOS set on ref 790i, so probably about 2.22-2.23 actual, a little more than I'm normally comfortable with.
It is very untweaked and the secondaries are garbage. I punched in my normal GTR secondaries and the ram wouldn't POST, so I lazily left everything at auto to start out. Just pumped to finally see some stability well over 1000 CAS 7, which I've been waiting months for.
I don't know what this ram is, I've never seen or heard of anything much like it, but it's definitely good stuff.
Last edited by Gautam; 07-11-2008 at 08:05 PM.
Got me sets. D9JNM here (82701400919xx). Spreaders are so loose didnt even had to remove them to see the chips.
Well here is my sad story
I bought my kit on April 1st of this year and they just died. They were 2x1Gb HZ series. Today while testing stability with P1 and P2 enabled on the Striker II Extreme, one went boom with BSoD, after 15 mins, the other stick went boom with BSoDs too so Im here left with no PC LOL!. Just for the heck of it I decided to check what ICs I had, and something told me I had those SUCKY-@SS D9JNL!!!
I will RMA this pos (third time RMAing G.Skill Rams including DDR2 D9s) and hopefully I will AT LEAST get a D9JNM or GTS (of course GTS would be great), I will post back soon, btw I cant believe people going 2000Mhz with this sticks! Something I never did probably because of the sucky ICs.
The first Striker was, this one has killed 2 kits as far as I know.
I will make sure to use a fan on top of the rams next time, when I found out they degraded, I took them out and they were burning as hell (at stock).
Would be really interest to see some results with the 2x2gb G-skills if anyone has any to post?
These are the ones -
http://www.memoryc.com/computermemor...0hzseries.html
System Specs:
Core i7 2600k
Asus Maximus V Gene
4x2gb G-Skill Ripjaw 2133mhz
MSI Radeon R9 290X
Asus Xonar Essence STX
2x Crucial M4 256gb RAID 0
Seagate 7200.12 3TB HDD
Corsair AX860i.
Watercooling Specs
EK Supreme HF, XSPC EX360, XSPC EX240, DDC Ultra w/aquacomputer top, Aqualis XT res, Kryographics 290X GPU block
yes i want some info at X38 mobos too, does anybody have the 2x2Gb kit in a X38/X48 mobo?
![]()
Do You Want To Know How I got These Scars?????
The ram that broke 13.1k are this model? f3-12800cl7d-2gbhz
iMac 24''
BNDMOD @ Cruz Alta (Cba.) Argentina
What the max voltage for 24/7 setting ? Using a corsair memory fan...
[SIGPIC]http://techsweden.org[/SIGPIC]
Gigabyte Z87X-OC, Haswell 4770K, 8GB Team Group 2666mhz, Asus HD7970
Bookmarks