Official Gigabyte X48T-DQ6 Info Thread

[Anri]

Hey guys I have some small issues with this motherboard. To also add, I am also a noob at overclocking. Anyhow...

In the bio setting of the x48T, what options am I looking for to raise the volts to the core or cpu?

And also, how would I know that if I am putting to much power or over volting?

Thanks for reading.

[Ace-a-Rue]

have you looked through this thread...i posted a bios shots of MIT tweaker for a 9650 cpu.

two links to study:

http://www.xtremesystems.org/forums/...&postcount=120

http://www.xtremesystems.org/forums/...&postcount=119

[PalmeAsus]

hi guys 1 question , i use e8500 and i don't got the gtlref voltage options i use bios f5d. Does that option only occur when using quad or what ?

Regards

[Ace-a-Rue]

you have to hit "Ctrl" key at the same time you hit F1 key to show that setting in the the "M.I.T." section...you do that when viewing the first page of the bios that has all the bios sub-category selections.

NOTE highligted yellow area.

[PalmeAsus]

thank you but i figured that out some min ago :P

regards

[PalmeAsus]

is f5d the latest bios ?

[Ace-a-Rue]

yes, as far as i know.

[loonym]

Click for more

I've received one of these rev 1.3 boards. Is the only real change the absence of the cpu socket back plate?

[Supershanks]

I've received one of these rev 1.3 boards. Is the only real change the absence of the cpu socket back plate?

I never had the 2 side by side , could only compare pictures , tbh that's the only difference I saw. Though I can't see them bringing out a revision just for that , there must be some other changes I guess, just not smart enough to ID them

[Ace-a-Rue]

it could come down to different electronic parts that are to small for the eye to pick out...i am into wearing corrected eye wear so i would need to use a magnifying glass to find those tiny parts which were changed.

[PalmeAsus]

i got the 1.3 rev and cant tell if it's any other improvments since i didnt have the 1.1 but for 520 fsb stable i dont need to increase any voltage except memory and cpu

[Supershanks]

it could come down to different electronic parts that are to small for the eye to pick out...i am into wearing corrected eye wear so i would need to use a magnifying glass to find those tiny parts which were changed.

you & me both four eyes

i got the 1.3 rev and cant tell if it's any other improvments since i didnt have the 1.1 but for 520 fsb stable i dont need to increase any voltage except memory and cpu

Good going will you be changing Username to PalmeGigabyte if you get higher ??

[PalmeAsus]

you bet i will tho my cpu suck as =/ but going to change it anyday now =)

[Supershanks]

you bet i will tho my cpu suck as =/ but going to change it anyday now =)

luck

[Ace-a-Rue]

you & me both four eyes

what about 'sealed beams"!

[Supershanks]

what about 'sealed beams"!

My Old specs from a few years back

[Ace-a-Rue]

that is toooo funny!

[Supershanks]

that is toooo funny!

[loonym]

Those are telescope lenses in those frames?

[Supershanks]

Those are telescope lenses in those frames?

Yes Snipers sights in right lens

[Ace-a-Rue]

Yes Snipers sights in right lens

who are you picking off?

[Supershanks]

who are you picking off?

no one at the minute i'm in a good mood , but it's good to have the resource Never know when you'll need it.

[Ace-a-Rue]

i know now not to make you mad and then make trip over to the UK.

[Supershanks]

i know now not to make you mad and then make trip over to the UK.

Oh if i get that rage on me I might strike anywhere Terminator style

[Ace-a-Rue]

that would have to be one darn good rifle to make it all the way over here!