Asus P5E3 Premium Wi-fi-AP

[nick2006]

Anyone with a quad using 505 ???

PLEASE, everybody, when posting happy having successful results, make a good deed, and don't forget sharing with the rest of us all your tweak settings (especially all voltage ones).

THANK YOU

[deachus]

Here are my quick runs on 0505 bios. I haven't had a chance to run 3D or 32M yet. I will post more results and more detailed info once I get some more free time.

Here is a link to my thread if you want to see results prior to 0505 bios. I don't think 0505 allowed me to get much higher on the FSB but did allow me to become Prime stable at a much higher FSB. I just got a second G.SKill kit yesterday to bump me up to 4GB and they also have D9GTS IC's like my current kit.

[djstx2003]

Here are my settings, not so overclocked but STABLE.
I was running Prime 95 for 8 hours without any errors.

Very Happy with bios 0505

My System:
CPU: Intel QX9650 - batch L744B175
MOBO: ASUS P5E3 Premium Wi-Fi / Bios 0505
RAM: Corsair Dominator XMS3 TW3X4G4096-1800C8DF (1800Mhz) 2x2GB
GPU: Asus Ati HD2900XT 512MB
PSU: ENERMAX Galaxy 1000 Watt

My settings:
CPU Ratio = 7.0
FSB Strap = 400
FSB Freq = 450
PCIE Freq = 105
DRAM Freq = 1800
Command Rate = 1N
Timings = 8,8,8,24
DRAM Static Read Control = Disabled
DRAM Dynamic Write Control = Disabled
CPU Voltage = 1.19375 (Bios)
DRAM Voltage = 1.86
Load Line Calibration = Normal
CPU Spread Spectrum = Disabled
PCIE Spread Spectrum = Disabled
Memory Remap Feature = Enabled

All other settings is auto.
CPU temp = 32
MOBO Temp = 37
with Watercooling system of course

Regardz

djstx2003

[sauria]

Here are my settings, not so overclocked but STABLE.
I was running Prime 95 for 8 hours without any errors.

Very Happy with bios 0505

My System:
CPU: Intel QX9650 - batch L744B175
MOBO: ASUS P5E3 Premium Wi-Fi / Bios 0505
RAM: Corsair Dominator XMS3 TW3X4G4096-1800C8DF (1800Mhz) 2x2GB
GPU: Asus Ati HD2900XT 512MB
PSU: ENERMAX Galaxy 1000 Watt

My settings:
CPU Ratio = 7.0
FSB Strap = 400
FSB Freq = 450
PCIE Freq = 105
DRAM Freq = 1800
Command Rate = 1N
Timings = 8,8,8,24
DRAM Static Read Control = Disabled
DRAM Dynamic Write Control = Disabled
CPU Voltage = 1.19375 (Bios)
DRAM Voltage = 1.86
Load Line Calibration = Normal
CPU Spread Spectrum = Disabled
PCIE Spread Spectrum = Disabled
Memory Remap Feature = Enabled

All other settings is auto.
CPU temp = 32
MOBO Temp = 37
with Watercooling system of course

Regardz

djstx2003

Can you go faster?

[djstx2003]

Can you go faster?

i don't have the time now to test it for more speed like 8.0 multiplier and tigher timings. but its on my mind. when i find some time be sure i'll test it more.

[nick2006]

i don't have the time now to test it for more speed like 8.0 multiplier and tigher timings. but its on my mind. when i find some time be sure i'll test it more.

Since we own similar systems (QX9650, 4GB RAM and this mobo), I suggest the following:

multiplier 8.0
strap 333
fsb 450
pcie 105
CR 1N
Ram 1801
Ram timings 7-7-7-18
Static Read and Dynamic Write both Disabled
All voltage to AUTO except VDimm set to 2.02
LLC Normal
Both Spectrums Disabled.

All others set to AUTO.

Also, C1E Support and Vanderpool Technology, both Disabled.

I've tried these settings tonight and had 32M super_pi_mod-1.5 passed OK, and OCCT 1hour test STABLE !!!

I've also tried 3D games (the 3DMark06 "Return to Proxycon" burntest, and Mass Effect for an hour or so, both with no errors or glitches).

I believe too that ASUS Bios v. 505 is so far "jackpot" even for auto settings overclocking...

[NinjaZX6R]

Since we own similar systems (QX9650, 4GB RAM and this mobo), I suggest the following:

multiplier 8.0
strap 333
fsb 450
pcie 103
CR 1N
Ram 1801
Ram timings 7-7-7-18
Static Read and Dynamic Write both Disabled
All voltage to AUTO except VDimm set to 2.02
LLC Normal
Both Spectrums Disabled.

All others set to AUTO.

Also, C1E Support and Vanderpool Technology, both Disabled.

I've tried these settings tonight and had 32M super_pi_mod-1.5 passed OK, and OCCT 1hour test STABLE !!!

I've also tried 3D games (the 3DMark06 "Return to Proxycon" burntest, and Mass Effect for an hour or so, both with no errors or glitches).

I believe too that ASUS Bios v. 505 is so far "jackpot" even for auto settings overclocking...

Would you mind linking me to that 0505 bios? I can't seem to find it. Thanks so much.

-Collin-

[nick2006]

Since we own similar systems (QX9650, 4GB RAM and this mobo), I suggest the following:

multiplier 8.0
strap 333
fsb 450
pcie 105
CR 1N
Ram 1801
Ram timings 7-7-7-18
Static Read and Dynamic Write both Disabled
All voltage to AUTO except VDimm set to 2.02
LLC Normal
Both Spectrums Disabled.

All others set to AUTO.

Also, C1E Support and Vanderpool Technology, both Disabled.

While using the above settings I have stable superPI nad OCCT, my PC keeps on rebooting randomly with instant BSOD...

I tried to set some values on ram skew control (200-250 delay on both channels) but the reboots keep on coming (one while browsing ob the net, other while re-encoding an .avi file etc.).

I'M TRULY DEVASTATED WITH THE THOUGHT THAT SO MUCH MONEY DON'T GIVE ME THE SECURITY OF A STABLE SYSTEM....

If anyone could help me here with some suggestion.... PLEASE !!!!

THANK YOU.

[Sectorz]

Here are my quick runs on 0505 bios. I haven't had a chance to run 3D or 32M yet. I will post more results and more detailed info once I get some more free time.

Here is a link to my thread if you want to see results prior to 0505 bios. I don't think 0505 allowed me to get much higher on the FSB but did allow me to become Prime stable at a much higher FSB. I just got a second G.SKill kit yesterday to bump me up to 4GB and they also have D9GTS IC's like my current kit.

Can you copy here your bios setting with the 503 and 505 ?