I have flashed my Blockops to G27, and the system booted. I went into the BIOS, saved and now get error 54 with a continuous beep beep and nothing on the screen.
Can change the BIOS select jumper to force BIOS 2 (P02) using pins 3-4 and the system boots fine. Incidently pins 7-8 (BIOS SELECT, default is BIOS ROM 2) got 54 and beeps. I am not entirely clear what the difference between 3-4 and 7-8. I am guessing one obviously forces, am not really sure what the other really does.
I have tried clearing the CMOS while booting from BIOS 1 (G27) but still get error 54. Does the CLR-CMOS1 button do anything different to the Clear CMOS jumper ?
If I have booted from BIOS 2, and reflash to G26 or something else, will it flash the BIOS I booted from, or BIOS 1 ?
The memory I am using is Corsair Dominator TW3X4G1800C8DF and I had not OC'd or changed any of the default settings.
I am not sure how to recover from this.
Bookmarks