Water Cooled Case Gallery

**Raxxath** · 07-04-2008, 09:02 AM

Originally Posted by sargatanas

here's my upcoming project, still in progress and a lot to do but i thought i share 1-2 pics of it

I think I speak for everyone when I say

. I thought it would be hard for you to outdo your last build, but I think you've done it.

**lowfat** · 07-04-2008, 09:03 AM

Originally Posted by rafwlkp

lowfat what fans is it ?
Love this clear coolant & green smartcoils

Nexus D12SL-12. They are exactly the same as the Yate Loon D12SL-12's. However I've heard they are 'binned'.

**Anemone** · 07-04-2008, 09:07 AM

Ok Sargatanas I'm going to ask kindly if I might be allowed to copy that grill over filter idea. That was a VERY nice inspiration over the filters themselves.

**sargatanas** · 07-04-2008, 09:18 AM

well the actually i just wanted to mount the filters without the grills.
but it was a lil screw problem so i mounted them over the filters. well after all i like it very well ^^
sure copy it if u like it

**sargatanas** · 07-04-2008, 10:45 AM

thanks realredraider, but actually it isn't...for the moment ^^
still have to wait for the mb trace which was forgotten so i had to find a ugly solution until the trace arrives...but i think i gonna translate and post the whole worklog after receiving the trace and finishing the lights/cables.

today some anodized u-bars arrived, gonna hide all the cables shown below etc at the corners of the tower, can't stand this cable chaos atm so i keep my eyes away from this side of the tower

still thinking about to order another front since the current one isn't the one i ordered and i still have 3 pa120.3 left.
dont know yet but i think i combine it with the next order/project since it's kinda expensive to ship from us ^^

**Paxi** · 07-04-2008, 10:48 AM

Absolute Overkill but very nice work

**iandh** · 07-04-2008, 11:16 AM

Originally Posted by lowfat

Nexus D12SL-12. They are exactly the same as the Yate Loon D12SL-12's. However I've heard they are 'binned'.

I've owned quite a few of both, and I must say that while the frame molds are identical, the blades on the Nexus are slightly more scooped, and have been nicely deburred. They are definitely one notch above the Yates in quality.

**Garrett** · 07-04-2008, 01:28 PM

Originally Posted by sargatanas

thanks realredraider, but actually it isn't...for the moment ^^
still have to wait for the mb trace which was forgotten so i had to find a ugly solution until the trace arrives...but i think i gonna translate and post the whole worklog after receiving the trace and finishing the lights/cables.

today some anodized u-bars arrived, gonna hide all the cables shown below etc at the corners of the tower, can't stand this cable chaos atm so i keep my eyes away from this side of the tower

still thinking about to order another front since the current one isn't the one i ordered and i still have 3 pa120.3 left.
dont know yet but i think i combine it with the next order/project since it's kinda expensive to ship from us ^^

Congratulations... you have just won the "most-tubing-in-1-case" Award

**PilatuS** · 07-04-2008, 01:34 PM

Originally Posted by sargatanas

here's my upcoming project, still in progress and a lot to do but i thought i share 1-2 pics of it

I have seen alot of extreme rigs but none of them as extreme as this. Very nice job though !

**emir** · 07-04-2008, 03:52 PM

@jdrom, that's an interesting tubing, can you post different angled pictures?

**K3nii** · 07-04-2008, 03:57 PM

double post

**Sparda** · 07-04-2008, 04:02 PM

One day built on sunday weekend few month ago by adding 2nd loop and mobo with a mediocre tube routing and wire managment.
Realized after that I got a slight flawed mosfet heatsink on the mobos.
Lesson learned

always test the gadget first on torture box.
Picture was taken several week later before I sell back the mobo.

Click image for larger version.

Name: P4130006.JPG
Views: 2501
Size: 137.9 KB
ID: 81500

**jdrom** · 07-04-2008, 04:05 PM

Originally Posted by emir

@jdrom, that's an interesting tubing, can you post different angled pictures?

Hopefully these will do:

And an older pic when there was tons of air:

**Atal** · 07-04-2008, 05:12 PM

@the_dude and Sargatanas, jeez what a mess

I dont mean it in a bad way

**CyberDruid** · 07-04-2008, 06:17 PM

Quad Loop: it's the new triple loop. Amazes me and looks great

. Remember when Triple loops was overkill...what was that 3 months ago

**sargatanas** · 07-04-2008, 11:19 PM

thx guys

I know it's kinda overkill but I like the look of the tygon chaos, think it should be bout 8-9m of it

**Anemic** · 07-05-2008, 03:24 AM

Originally Posted by Bla$nA

Absolute Overkill but very nice work

Naaaa, overkill, you think?

**~~MomijiTMO~~** · 07-05-2008, 03:44 AM

Hey Sparda you need to wash those dust filters. Oh yeah for some reason I love how you mounted your res. It's very symmetrical

**Blacky** · 07-05-2008, 07:28 AM

My new WC setup enjoy!

any opinions or suggestions

?

**malkiewicz** · 07-05-2008, 07:32 AM

IMO Red or Blue coolant would look better....

**Paxi** · 07-05-2008, 07:34 AM

and why you´re using 2 res´s ?

**Logos** · 07-05-2008, 07:36 AM

BlackOps + Crossfire = good choice! May be WC the GPUs

agree with above poster, I don't like green coolant either

; but OK just a
matter of taste.

could you add the spec of your system ? (may be in your sig)

**Sparda** · 07-05-2008, 07:39 AM

Originally Posted by MomijiTMO

Hey Sparda you need to wash those dust filters. Oh yeah for some reason I love how you mounted your res. It's very symmetrical

^^It not thick enough to be cleaned.[x.x]
There salad tubing inside so I just mount it there.

**Blacky** · 07-05-2008, 08:19 AM

Originally Posted by malkiewicz

IMO Red or Blue coolant would look better....

Thanks for the opinion

Originally Posted by Bla$nA

and why you´re using 2 res´s ?

as for now I have 2 loops one for CPU and the other one for NB the NB one is going to change once I get my blocks for my GPU's

**Papu** · 07-05-2008, 08:29 AM

Originally Posted by Blacky

Thanks for the opinion

as for now I have 2 loops one for CPU and the other one for NB the NB one is going to change once I get my blocks for my GPU's

did you paint the inside of your case?

Thread: Water Cooled Case Gallery

Thread Tools

Search Thread

Display

Bookmarks

Bookmarks

Posting Permissions