Thermochill PA140.X (For use with 140mm Fans) Voice Your Opinion!

[STEvil]

I want a PA160.4 lol

[Panthols]

isnt that a little excessive thats like 13824 cubic inches thats alot of room,

You can never have enough room. Anyways I may set it up like a duality, considering what I'm looking at has 6 140mm fans in the front, 3 in the back, 4 120mm's in front, 2 in back and 4 on top. Not to mention 4 PSU mounts.

Hrmm, that may be overkill. *shrug* guess it's called xtreme systems for a reason. Either way I'll build a 22" cube w/ 120.3's if Marci doesn't make the 140's. I think my wife is on board w/ me getting a new case since I promised to powder coat this one pink and give it to her.

[pattherat111]

You can never have enough room. Anyways I may set it up like a duality, considering what I'm looking at has 6 140mm fans in the front, 3 in the back, 4 120mm's in front, 2 in back and 4 on top. Not to mention 4 PSU mounts.

Hrmm, that may be overkill. *shrug* guess it's called xtreme systems for a reason. Either way I'll build a 22" cube w/ 120.3's if Marci doesn't make the 140's. I think my wife is on board w/ me getting a new case since I promised to powder coat this one pink and give it to her.

yer i decided to do basically the same but mines only a 22" cunbe i dont have much experience with sketchup so i cant do all the internals and the backplates

[contiki]

Would be a 140.3 straight away; would be nice if I could find low noise 140mm fans in the UK. They seem to be as rare as hens teeth around here

[Clockwork_Apple]

I would be very interested in a PA140.2, but I think 140.3 would be near impossible to fit in any normal sized case.

So wierd I was just thinking the other day about 140mm rads.

[Waterlogged]

isnt that a little excessive thats like 13824 cubic inches thats alot of room,

It could be like any other case out there. If it's well laid out, yes, that's a ton of room....BUT, if it's poorly laid out, it's gonna get cramped in a hurry.

It's either gonna be a TJ07 or a Antec900.

[kinghong1970]

dunno if this has been said... but why not a shroud for a 160 that fits a 140 fan?

[STEvil]

already exist.

[Pete]

this should be locked, marci has already said there will not be a 140.x rad.

Did he? I didn't ever notice that. I think there is enough need for the PA140.3/4

I personly want the 4 but thats me

[SNiiPE_DoGG]

Did he? I didn't ever notice that. I think there is enough need for the PA140.3/4

I personly want the 4 but thats me

he sent me a PM when I inquired about it, lemme see if i can dig it up...

http://www.xtremesystems.org/forums/...2&postcount=35
^^ theres the post

considering that Thermochill clearly cant meet demand (ie OOS most places) so they clearly wont be dev'ing a new radiator

[Clockwork_Apple]

http://www.xtremesystems.org/forums/...2&postcount=35
^^ theres the post

That was 8 months ago though, but yes it seems unlikely we will be seeing a PA140.X anytime soon...

Did he? I didn't ever notice that. I think there is enough need for the PA140.3/4

I personly want the 4 but thats me

How would you fit a PA140.4 anywhere in/on a case? That's over 560mm long...

[Pete]

How would you fit a PA140.4 anywhere in/on a case? That's over 560mm long...

Who said anything of it being a case, or one thats directly there to the market

[mad mikee]

but a PA140.2 will perform very well fbased on expectation...probably not far off from PA120.3 and better than almost all other 120.3 based on the fact PA120.2 did...you will get less fans and more airflow and it will be quieter

PA140.2 depending on overall size could be an awesome rad.....

Now if Petra could stock it and few 140mm YL fans

[hagatha]

I definitely think there is a market for larger more adaptable rads... With as many people that are building custom cases from the ground up... you know there are owners that would go with the "biggest & baddest"...

Something in the lines of a setup that would be capable of linking more than one rad together... like PA 140.2x2 or a 3x3.... even if they went back to the 120mm standard... I would like a 3x3 setup! The rad should be more adaptable than it is... rads are do or die... when it comes to fitting them where you have room.

go for it!

hagatha

[pattherat111]

i spec'd up just a square case in sketchup and it fits a 140.3 easily mind you its 22" wide. It has enough room for two

[Kayin]

At 36" tall and building, my next case ought to dwarf those.

Could easily fit 4x140.3s with a pair of 140.2s in the back and a 120.2 under the PSU. And it's NOT a cube. When I get the foot on it, I expect it to be near 4 foot tall, and 14 inches wide. It would all JUST fit, but it would fit.

[kinghong1970]

already exist.

um... aside from custom made ones... where?

[Pudi]

where is Marci when hes needed ? maybe he can put some light on this

[rocket733]

Lian Li P80 has 3 140 MM fans in the front of the case.

[Bobly]

Arf it seems googling around for 140mm rads just finds this thread :/ I'm looking at the Thermaltake Armor+ (Great reviews and I quite like it's features) which allows for two 140mm fans to be mounted on the bottom as intake which would be perfect for a 140.2 rad >.< Guess I'm gonna have to go with 120.2 in the mean time...

[lowfat]

BTW you realize this thread hasn't been touched in almost 7 months?

[mussafry]

Great, and i just bought a 120.3 to fit in my PC-P80 armorsuit xD Hehe! Guess ill throw that in the top panel and buy a 140.3 and put it in the front

[disruptfam]

140.3 140.4 :d

[Bobly]

BTW you realize this thread hasn't been touched in almost 7 months?

Yeah I know but there's always the thought that continued interest might light a spark in thermalrights dev department

For those who didn't take the time to read the first page, the 140.x are not actually being made, as far as I know they haven't even done a prototype yet, this was simply a discussion :P

[cyberspyder]

Yeah I know but there's always the thought that continued interest might light a spark in thermalrights dev department

For those who didn't take the time to read the first page, the 140.x are not actually being made, as far as I know they haven't even done a prototype yet, this was simply a discussion :P

Thermochill