better pisc
![]()
better pisc
![]()
That's some nice case and blue liquid Plastek butfloppy drive?
Not everyone is using a usb flash drive to flash their bios![]()
![]()
Li'Lfish, DX38BT, Q6700@3.33GHz, 2GB Crucial Ballistix DDR3, WD6400AAKS, HD4850 (needs an S1), Lite-On SATA, HX620
MCR-220+Yate-Loons, MCP-655 @ 1, DD X38, DTek Fuzion V2+Quad, microsres, 7/16" MasterKleer, PrimoChill UV coils
![]()
PSU is weatherstripped to isolate from the inside (air drawn from outside goes right back out)
Rad is weatherstripped to force the hot air down through vent holes
80-120m adapter on another Yate-Loon forces the intake air towards the rad intake (temporary until I make a better duct)
Temporary 120mm until I get Kama-bay or Lian-Li bay,
and the older style 80mm Li-Li bay for my HDD(s)
I have a small concern that the res is too low, and I definitely need taller feet/Li-Li replacement wheels to remove some restriction on the rad exhaust. But, so far it's working great. I haven't been able to get it above 56*C (even at 87*F ambient), but I still need a fan controller to lower the noise.
I just figured out where to put this:
BoneTrail FTW!
![]()
Lastly, I call these shots "Confessions of a Hardware Junkie":
![]()
I'll need to take these again when I clean up the HTPC, and I'll open my laptop & lay out the Axim just to make the family complete.
(The SonataIII is actually empty - for a few more days - it's going to be a sound editing machine for my brother-in-law.)
Last edited by down8; 06-29-2008 at 09:33 PM. Reason: Flipped the pump
Intel Q9550@3.4GHz & BoneTrail X38,
HD4850@700/1100, G.Skill 3x2GB@1333,
VelociRaptoRAID, Li'Lfish, DTek+Swiftech H2O
Intel E2180 @ 2.5GHz & Bad Axe 2,
ATi HD 2600 Pro / 256MB @ 660/1100,
Super Talent 4 x 1GB @ 832MHz/4-4-3-7,
WD5000AAKS, CoolerMaster GeminII/RC690
FYI. get the lian li one. The kama bay has terrible... ehm whats the word, fit form... err something. Every case ive tried mine on leaves gaps one both sides of it.
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
It is a brazilian made called Tanger Flex by Mantac.
http://www.mantac.com.br/produtos.php
Their website is not very informative but it should be the "TRANÇADA SUPER FLEXÍVEL PT150"
My Lian Li G70
Asus P6X58D-E * i7-930 * Saphire 7970 * 6GB Corsair XMS3 1600 C7 * Crucial M4 256GB SSD * Lian Li G70W Powdercoated
Watercooled by single loop Coolgate Quad 120 + Swiftech MCR220 with San Aces H1011 * EK Supreme HF * Koolance VID-AR797 * EK Asus X58 full set * DDC 3.25 with EK Dual Top/Res
I was originally thinking too using blue tubing for cooled water and tubing color eventually turning red just before radiator.
Nah, I said. So right now I'm going for clear tubing, badass car-rad and turning my Sonata II totally black with red lights. I'll post a worklog or something later this week, and I'll finally add my baby to this sweet WC case gallery.
And leo_bsb, that orange tubing looks good for me, alltough you'll have to go orange with the rest of your setup too, because those tubings are quite domating. And change that coloured liquid![]()
Not into xtreme builds anymore, just like to keep things silent.
Asus P6T Deluxe V2 - Intel i7 920 3.6 GHz - 6 Gb 1800 MHz DDR3 - AMD HD5850
What`s with all those caps? Low Esr type ?
Updated pics of my build! Im just going to say 'still not complete' for now :P
![]()
[ Lian-Li V1000B // EP45-UD3P // E8400 // HD4870 ]
[ W/C by EK, MIPS, D-tek, Bitspower, Swiftech, XSPC]
[ Project LucentTide - WORKLOG! ]
~~~~~~~~water ed ~~~~~~~~~~
Sry 4 my english
http://galeriawc.pl
DarthBeavis where dvd room?
~~~~~~~~water ed ~~~~~~~~~~
Sry 4 my english
http://galeriawc.pl
This is my first liquid cool computer.Installation and cable management done by bryanyeo87 from lyn.net.Thanks,bro.
Here is some pic:
Loop Spec:
Dtek Fuzion V2
Swiftech MCR220
Swiftech Micro Res
Generic 1/2" ID Tube
3xYate Loon Mid Speed(77cfm)
Swiftech Radbox
Nirox P2800
Intel E8600 E0@420x10(H20)/Abit IP35 Pro/Team Xtreem DDR 2 1066mhz D9GKX@420mhz,5-4-4-11-2T /Crucial Ballistx Tracer DDR 2 800mhz 16FD3@420mhz 5-4-4-11-2T/Gigabyte GTX260 SOC@720/1512/1300/LG SATA DVD-RW/WD 320GB +Segate 1TB/Corsair HX520W/Enlight Lian Li OEM PC7A casew/W65A Side panel
Liquid cool: Dtek Fuzion V2,Swiftech MCR220,Swiftech Radbox,Swiftech Micro res,Nirox P2800 modded pump,Generic 1/2" ID tubing,3xYate Loon mid speed
Note:E8500 is 9.5x but cpuz got issue and X2 4600+ is oc with stock cooler,max validation and never push
9.204's PI
Happy Bunny is Happy.
![]()
20 Logs on the fire for WCG:i7 920@2.8
X3220@3.0
X3220@2.4
E8400@4.05
E6600@2.4
Pics of my PC from the Vid on page 369
![]()
Bookmarks